• 제목/요약/키워드: Contaminant injection

검색결과 32건 처리시간 0.028초

토양 탱크에서 흡수 알코올과 비흡수 알코올을 이용한 벤젠-비수용상액체 제거 연구 (Removal of Benzene-Nonaqueous Phase liquid(NAPL) in Soil Tank by NAPL Swelling and Non-swelling alcohols)

  • 송충현;정승우
    • 유기물자원화
    • /
    • 제17권3호
    • /
    • pp.40-47
    • /
    • 2009
  • 토양으로 유출된 비수용상액체(nonaqueous phase liquid; NAPL)의 제거를 위한 알코올 희석 세정공정의 기술개발을 위하여 3-D 토양탱크에서 NAPL 흡수 및 비흡수 알코올 단독 또는 공기 동시 주입공정에 의한 벤젠 NAPL 제거 효과를 평가하였다. 37L 규모의 토양탱크에 729mL의 벤젠을 주입하고 70%에탄올 (NAPL 비흡수 알콜)과 40%이소 프로판올(NAPL 흡수 알콜)을 탱크 하부에 설치된 주입정에 주입하고 상부의 추출정으로부터 자유상 NAPL 및 수용액을 추출하였다. 그리고 알코올 주입과 공기를 동시 주입하여 기존 토양칼럼실험에서 확인된 공기 동시주입시 화학세정 증대 효과를 아울러 평가하였다. 70% 에탄올 및 40% 이소-프로판올에 의한 토양탱크 세정공정 결과 전체 벤젠 제거율의 과반수는 자유상 NAPL 형태로 제거되었다. 알코올의 NAPL 흡수 특성에 따라 벤젠 제거 특성이 현저히 다르게 나타난 토양칼럼결과와 달리 3-D공정에서는 알코올 NAPL 흡수특성의 영향이 매우 적게 나타났다. 70%에탄올과 공기 동시 주입에 의한 벤젠 제거 증대 효과는 3-D 토양탱크 실험결과에서도 여전히 확인되었다. 그러나 NAPL 흡수 알코올인 40% 이소-프로판올은 공기 동시 주입에 의한 벤젠 제거 증대효과가 여전히 미미하게 나타났다. 3-D 토양탱크 실험결과 화학세정공정에 의한 NAPL제거에 있어 가장 중요한 인자는 추출정의 NAPL 및 유출수 추출능력이었다. 즉 토양내 효과적인 NAPL 정화를 위해서는 화학적인 작용에 의하여 이동된 자유상 NAPL 및 수용액을 밖으로 효율적으로 추출할 수 있는 공정이 필요하다.

  • PDF

5 kW급 고분자 전해질 연료전지 스택의 운전 특성 (Operation Characteristics of 5 kW Class Proton-Exchange-Membrane Fuel Cell(PEMFC) Stack)

  • 김재동;이정운;박달영
    • 한국가스학회지
    • /
    • 제11권1호
    • /
    • pp.51-54
    • /
    • 2007
  • 78개 셀의 전극유효 면적이 $295cm^{2}$인 고분자 전해질 연료전지(PEMFC) 스택의 운전특성과 CO 피독에 대한 영향을 조사하였다. 전류밀도 $325mA/cm^{2}$에서 출력 5.4kW를 6시간 유지시키는 동안 셀들의 전압편차는 2.3%로 매우 안정함을 보였다. 개질과정의 부산물로 생성되는 CO는 PEHFC의 성능에 중요한 영향을 끼치는 스택의 주 오염물질중의 하나이다. 시간에 따른 연속적인 CO 피독 실험(5-20ppm)은 스택의 피독과 재생과정의 route를 알 수 있었다.

  • PDF

RO Membrane System을 이용한 도시하수처리 (The Application of RO Membrane System in Municipal Wastewater Reclamation)

  • 이규현;안준수;유제강
    • 멤브레인
    • /
    • 제1권1호
    • /
    • pp.78-95
    • /
    • 1991
  • 미국 캘리포니아주 Orange County에 위치한 Water Factory 21(WF-21)은 생물학적 처리공정을 거친 도시하수를 재생하여, 이 재생수를 지하수지층으로 유입되는 해수의 침투를 막기 위한 Reinjection System에 이용하고 있다. 장치 구성 공정은 Lime처리, Air Stripping, 사여과, 활성탄처리, 역삼투막 및 염소처리 등으로 이루어지며, 이에 대한 각 처리공정의 효율성에 대하여 실험을 실시하였다. 3년간의 장기간에 걸친 실험결과로부터, 도시하수에 대한 RO Membrane 처리수는 음료 수질 기준에 적합한 고수질의 물을 생성할 수 있음을 입증했다. Pilot Plant 실험에선 Lime Clarifier만으로 전처리를 실시하여 성공적인 결과를 얻었으며, 또한 저압 (250 psi)이 적용된 새로운 Membrane을 사용하여 에너지 절약을 통한 비용 절감 효과에 대한 실험도 상당한 가능성을 보여주었다.

  • PDF

토양 세정법을 이용한 실제 유류 오염 토양 및 지하수 정화

  • 강현민;이민희;정상용;강동환
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
    • /
    • pp.418-421
    • /
    • 2003
  • Surfactant enhanced in-situ soil flushing was peformed to remediate the soil and groundwater at an oil contaminated site, and the effluent solution was treated by the chemical treatment process including DAF(Dissolved Air Flotation). A section from the contaminated site(4.5m$\times$4.5m$\times$6.0m) was selected for the research, which was composed of heterogeneous sandy and silt-sandy soils with average Hydraulic conductivity of 2.0$\times$10$^{-4}$ cm/sec. Two percent of sorbitan monooleate(POE 20) and 0.07% of iso-prophyl alcohol were mixed for the surfactant solution and 3 pore volumes of surfactant solution were injected to remove oil from the contaminant section. Four injection wells and two extraction wells were built in the section to flush surfactant solution. Water samples taken from extraction wells and the storage tank were analyzed by GC(gas-chromatography) for TPH concentration with different time. Five pore volumes of solution were extracted while TPH concentration in soil and groundwater at the section were below the Waste Water Discharge Limit(WWDL). Total 18.5kg of oil (TPH) was removed from the section. The concentration of heavy metals in the effluent solution also increased with the increase of TPH concentration, suggesting that the surfactant enhanced in-situ flushing be available to remove not only oil but heavy metals from contaminated sites. Results suggest that in-situ soil flushing and chemical treatment process including DAF could be a successful process to remediate contaminated sites distributed in Korea.

  • PDF

Enhanced Expression of Plasma Glutathione Peroxidase in the Thymus of Mice Treated with TCDD and Its Implication for TCDD-induced Thymic Atrophy

  • Cho, Hyun-Jin;Hahn, Eun-Jin;Hwang, Ju-Ae;Hong, Min-Sun;Kim, Sook-Kyung;Pak, Hye-Ryun;Park, Joo-Hung
    • Molecules and Cells
    • /
    • 제21권2호
    • /
    • pp.276-283
    • /
    • 2006
  • The potent environmental contaminant, 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), induces thymus atrophy in experimental animals. However, its mechanism of action is not fully understood. To gain insight into its immunosuppressive effect, Balb/c mice were intraperitoneally injected with TCDD ($30{\mu}g/kg$ body weight) and genes regulated by TCDD were identified using cDNA arrays [Park and Lee (2002)]. One of the regulated genes was that for plasma glutathione peroxidase (pGPx). Upon TCDD injection, pGPx mRNA levels in the thymus increased, in parallel with increases in GPx activity and the frequency of anti-human pGPx antibody-reactive cells. pGPX mRNA levels were also moderately up-regulated in the testis and spleen. This is the first report that a particular isotype of the glutathione peroxidase family is regulated by TCDD at both mRNA and protein levels. pGPx is expressed in various tissues in contact with body fluids, and detoxifies hydrogen peroxides and lipid hydroperoxides. It will be of interest to assess the role of pGPx in TCDD-induced thymic atrophy.

Can a nanofluid enhance the critical heat flux if the recirculating coolant contains debris?

  • Han, Jihoon;Nam, Giju;Kim, Hyungdae
    • Nuclear Engineering and Technology
    • /
    • 제54권5호
    • /
    • pp.1845-1850
    • /
    • 2022
  • In-vessel corium retention (IVR) during external reactor vessel cooling (ERVC) is a key severe accident management strategy adopted in advanced nuclear power plants. The injection of nanofluids has been regarded as a means of enhancing CHF when using the IVR-ERVC strategy to safeguard high-power nuclear reactors. However, a critical practical concern is that various types of debris flowing from the contaminant sump during operation of an ERVC system might degrade CHF enhancement by nanofluids. Our objective here was to experimentally assess the viability of nanofluid use to enhance CHF in practical ERVC contexts (e.g., when fluids contain various types of debris). The types and characteristics of debris expected during IVR-ERVC were examined. We performed pool boiling CHF experiments using nanofluids containing these types of debris. Notably, we found that debris did not cause any degradation of the CHF enhancement characteristics of nanofluids. The nanoparticles are approximately 1000-fold smaller than the debris particles; the number of nanoparticles in the same volume fraction is 1 billion-fold greater. Nanofluids increase CHF via porous deposition of nanosized particles on the boiling surface; this is not hindered by extremely large debris particles.

전기저항센서가 부착된 주상실험기에서 측정된 전기저항값을 이용한 용질의 이동해석 (Analysis of Solute Transport based on Electrical Resistance Measurements from Laboratory Column Tests)

  • 김용성;김재진;박준범
    • 대한토목학회논문집
    • /
    • 제28권4C호
    • /
    • pp.231-238
    • /
    • 2008
  • 본 연구에서는 오염용질의 이동특성을 분석하기 위한 측정방법으로서 전기저항센서를 부착한 주상실험기를 개발하였으며 3가지의 포화사질토에 비반응성 추적자를 주입하여 그 적용성을 평가하였다. 측정된 전기저항 값을 바탕으로 전기전도도 파과곡선을 얻었으며, 추정된 농도자료를 이류-확산 방정식에 대입하여 수리분산계수를 산정하였다. 유출수 파과곡선에서 추정된 평균간극유속과 종분산계수를 바탕으로 전기전도도 파과곡선의 신뢰성을 평가해본 결과 전제된 ${\sigma}_{sat}-{\sigma}_w-C$(흙의 전기전도도-간극수의 전기전도도-간극수 내 용질의 농도) 사이의 선형 조건이 성립할 시 측정된 전기저항치는 흙 매질내 간극수 용질의 상대농도를 간접적으로 추정할 수 있는 인자임을 확인하였다. 전기전도도 파과곡선은 실제농도(resident concentration)의 시간적 변화를 나타낼 수 있는 만큼 시간연속적인 전기저항 측정은 많은 시간과 노력이 요구되는 용출수 샘플링과 분석을 효과적으로 대체할 수 있을 것으로 판단되었다. 불확실성을 줄이기 위해 저항측정위치와 주입되는 용액과 포화간극수와의 전기적 차이가 고려되어야함을 확인하였다.

고주파수 전자기파를 이용한 압밀 포화토 물성치 측정을 위한 연구 (A study on measurement of physical parameters using electromagnetic wave of the compacted saturated soil)

  • 김만일;김형수;석희준
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.354-361
    • /
    • 2005
  • Physical parameters such as porosity and effective porosity are important physical parameters that determine the transfer and movement of water and solutes in porous media. Various methods of determining these parameters have been developed, with varying degrees of accuracy and applicability. Most of the existing methods produce static results. They do not produce instantaneous and real time of porosity and effective porosity in a porous media. In this study, a new permittivity method called Frequency Domain Reflectometry with Vector analyzer (FDR-V) is proposed to determine the porosity and effective porosity of some sand samples in the laboratory. The advantage of the FDR-V method is that it instantaneously determines the temporal variation of dielectric constants of porous media. Then, the porosity and the effective porosity of porous media are computed using well established empirical equations. Results obtained from the FDR-V method compared favorably with results from other permittivity methods such as gravimetric, injection and replacement tests. The ratio of effective porosity to porosity was $85{\sim}92%$, when FDR-V was used. This value compared favourably with 90%, which has been usually quoted in previous studies. Considering the convenience and its applicability, the measurement system of FDR-V permittivity holds a great potential in porous media and contaminant transport studies.

  • PDF

제강분진을 이용한 매립지 침출수의 산화처리 (Steelers' Dust-catalyzed Oxidative Treatment of Landfill Leachate)

  • 강정우;김성용;장윤영;배범한;장윤석
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제7권1호
    • /
    • pp.25-31
    • /
    • 2002
  • 본 연구는 제강분진/${H_2}{O_2}$ 시스템을 이용한 매립지 침출수의 화학적 산화처리 효과를 알아보고자 하였다. 먼저 회분식 실험을 통해 산화촉매로서의 제강분진의 활용 가능성을 확인하였으며, 반응의 주요 변수인 pH, 제강분진과 과산화수소의 주입농도, 그리고 과산화수소의 분할주입 등의 조건변화에 따른 매립지 침출수의 처리효율과 최적 반응조건을 알아보았다. 최적 ${H_2}{O_2}$와 제강분진의 주입조건인 20g/L dust +2,000mg/L ${H_2}{O_2}$에서 반응시간 60분내에 초기 TOC 농도(250mg/L)의 75%가 제거되었으며, 이 때 ${H_2}{O_2}$/dust 시스템의 최적 반응 pH는 3-4였다. 철염을 반응촉매로 사용하는 펜톤산화반응과 비교하였을 때, 제강분진을 반응촉매로 사용하는 경우가 반응성과 경제성에서 더 유리한 것으로 나타났다.

초고속 미세 액적 충돌을 이용한 나노미터 크기 입자상 오염물질의 세정에 대한 CFD 시뮬레이션 (CFD simulation of cleaning nanometer-sized particulate contaminants using high-speed injection of micron droplets)

  • 박진효;김정건;이승욱;이동근
    • 한국입자에어로졸학회지
    • /
    • 제18권4호
    • /
    • pp.129-136
    • /
    • 2022
  • The line width of circuits in semiconductor devices continues to decrease down to a few nanometers. Since nanoparticles attached to the patterned wafer surface may cause malfunction of the devices, it is crucial to remove the contaminant nanoparticles. Physical cleaning that utilizes momentum of liquid for detaching solid nanoparticles has recently been tested in place of the conventional chemical method. Dropwise impaction has been employed to increase the removal efficiency with expectation of more efficient momentum exchange. To date, most of relevant studies have been focused on drop spreading behavior on a horizontal surface in terms of maximum spreading diameters and average spreading velocity of drop. More important is the local liquid velocity at the position of nanoparticle, very near the surface, rather than the vertical average value. In addition, there are very scarce existing studies dealing with microdroplet impaction that may be desirable for minimizing pattern demage of the wafer. In this study, we investigated the local velocity distribution in spreading liquid film under various impaction conditions through the CFD simulation. Combining the numerical results with the particle removal model, we estimated an effective cleaning diameter (ECD), which is a measure of the particle removal capacity of a single drop, and presented the predicted ECD data as a function of droplet's velocity and diameter particularly when the droplets are microns in diameter.