• Journal of Intelligence and Information Systems
• /
• v.12 no.3
• /
• pp.47-65
• /
• 2006

These days, the number of automated container terminals is increasing to encourage the productivity of the container terminal inside and outside of the country. So far, there have been a lot of researches on the operating one type of equipments in a container terminal. However, there is still room for further improvement as none of equipment works itself but cooperate each other to finish a job, which means synchronization among the equipments is necessary. Among lots of equipments in a terminal, this paper concerns with the operation of ATCs (Automated Transfer Crane) and YTs (Yard Truck). The purpose of this paper is to find the efficient heuristic methods for operating ATCs and YTs that can set up a schedule in a real time. Moreover, using simulation this paper shows the efficient stacking strategy to decide the location of containers to be put and the proper selection range of YTs.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.577-584
• /
• 2003

Container terminals are various in terms of layout, cargo handling systems and operational aspects resulting in difference in productivity and economic feasibility. Therefore, by evaluating different terminal types, more comprehensive understanding can be grasped. For this the paper aims at evaluating the three terminal types under operation, the conventional terminal, the unmaned terminal and the indented terminal, with respect to productivity and cost. Based on the results in connection with the situation of Korean container terminal operation, feasibility for each type is discussed with suggestion for the optimal type.

• Journal of Korea Port Economic Association
• /
• v.26 no.3
• /
• pp.75-91
• /
• 2010

The aim of this study is to analyze current level of knowledge management(KM) performance in major container terminals. To achieve this aim, the evaluation criteria and KM performance index from pervious research were adopted. and current levels of KM performance of four leading container terminal operators which is located in Busan port were measured. The results firstly showed that average of KM level of these terminal operators was 67.7. And also, from the results of data analysis, it revealed that the weak point of KM in Korean leading terminal operators is official system and programs such as incentive policies, learning programs, and IT support systems for organizational knowledge sharing and knowledge codification.

• Journal of Navigation and Port Research
• /
• v.41 no.4
• /
• pp.229-234
• /
• 2017

Container terminal yards operate under a high degree of uncertainty as the contact point between inbound and outbound operations of vessels and external trucks. The layout, equipment operations. and job orders at the yards determine the efficacy and delays of the work, so many studies have investigated improvements in efficiency. H company, a container terminal operator developed an index called WDI to distribute work among RTGCs. The WDI is an indicator to prevent congestion in one place by equally distributing the work to each RTGC. This paper analyzes the effect of the WDI introduction and discusses the causes and results of the WDI introduction effect from quantitative and qualitative perspectives.

• Journal of the Korea Society for Simulation
• /
• v.28 no.3
• /
• pp.25-40
• /
• 2019

Today, container terminals are fiercely competing to attract an increasing number of containers. As a way to improve terminal productivity, this study proposes two dispatching rules for yard truck allocation priorities. First, Multi-Attribute Dispatching Rule(MADR) is an allocation method to calculate the weighted sum of multiple factors affecting container terminal productivity and priority them. Especially, the workload of the quay crane was considered one of the factors to reduce the residence time of the ship. Second, Cycling Dispatching Rule(CDR) is the effective way to increase the number of double cycles that directly affect terminal productivity. To identify the effects of combinations of pooling and dispatching, a comparative experiments was performed on 8 scenarios that combined them. A simulation environment has been developed for experiments and the results have demonstrated that the combination of terminal level pooling and Multi-attribute Dispatching could be an excellent combination in KPIs consisting of GCR and delayed departure of ships, etc.

• Journal of Korea Port Economic Association
• /
• v.27 no.4
• /
• pp.219-235
• /
• 2011

Today FTAs(Free Trade Agreements) are revving up among countries in the course of glocalization. Dubai, Pudong of Shanghai, Binhai shinku of Tianjin are actively pursuing Free Zones, and Saemangeum District in Korea is under development as growth base in North East Asia. This study aims to present the proper development scale and other development schemes for Samangeum Newport. In conclusion, following several schemes are required; firstly more sophisticated forecasting of demand and supplementation for Saemangeum Newport, secondly development of dedicated container terminals and dedicated food terminals, and finally cruise terminal for the tourist activation.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.2
• /
• pp.354-364
• /
• 2017

This study tries to evaluate the effect of ITT introduction in Busan New Port. The study used the estimation model of the number of vehicles required in accordance with the backhaul rate. The model used big data, COPINO e-document for one year in 2015. COPINO recorded the event such as truck ID, container ID, ATA, damage etc when truck arrived at gate. The study finds important information to estimate the required number of trucks for handling current ITT containers in Busan New Port: Daily throughput in Busan New Port is 1650 vans, especially night throughput recorded peak level in 1800 hours to 2400 hours, the throughput between adjacent terminals recorded high, i.e PNIT to HPNT. The transportation capability for 6 hours between terminals is from 4 vans to 7 vans. The required trucks are estimated 89 currently without considering peak level. If we change the back haul rate from current 20% to 40%, 60% and 80%, how much would the cost drop? It was discovered that, if it is raised to 40%, 60% and 80%, the number of vehicle required will be reduced from 89 (current) to 76, 65 and 59. It was also discovered that the total savings will reduce down to 12%, 25% and 34%.

• KIISE Transactions on Computing Practices
• /
• v.21 no.5
• /
• pp.373-378
• /
• 2015

In order to effectively operate and manage the port terminal, it is necessary to use port terminal simulator for the analysis of port terminal. However, there are many difficulties in applying an existing port terminal simulator to various terminals, because each of the port terminals has different structures, facilities, equipment, and job processes. Therefore, in this paper, we propose a design method of port terminal simulator for the improvement of reusability by using model-based techniques. We also showed the implementation of the prototype of the port terminal simulator of applying the research content.

• Journal of Navigation and Port Research
• /
• v.41 no.3
• /
• pp.137-148
• /
• 2017

Port service level is a metric of competitiveness among ports for the operating/managing bodies such as the terminal operation company (TOC), Port Authority, or the government, and is used as an important indicator for shipping companies and freight haulers when selecting a port. Considering the importance of metrics, we developed software to objectively define and manage six important service indicators exclusive to container and bulk terminals including: berth occupancy rate, ship's waiting ratio, berth throughput, number of berths, average number of vessels waiting, and average waiting time. We computed the six service indicators utilizing berth 1 through berth 5 in the container terminals and berth 1 through berth 4 in the bulk terminals. The software model allows easy computation of expected ship's waiting ratio over berth occupancy rate, berth throughput, counts of berth, average number of vessels waiting and average waiting time. Further, the software allows prediction of yearly throughput by utilizing a ship's waiting ratio and other productivity indicators and making calculations based on arrival patterns of ship traffic. As a result, a TOC is able to make strategic decisions on the trade-offs in the optimal operating level of the facility with better predictors of the service factors (ship's waiting ratio) and productivity factors (yearly throughput). Successful implementation of the software would attract more shipping companies and shippers and maximize TOC profits.

• Journal of Korea Port Economic Association
• /
• v.36 no.3
• /
• pp.99-114
• /
• 2020

Overseas advanced ports are promoting smartification, as well as full automation of the terminals surrounding container terminals. A smart port can be defined as a comprehensive concept that pursues increased operational efficiencies, maximization of profit, efficient use of energy, and construction of eco-friendly ports with the introduction of fourth-industrial-revolution technology, including port automation. However, Korea is making efforts to introduce fourth-industrial-revolution technology into ports, but indications are that they are somewhat insufficient compared to advanced ports abroad. Therefore, this study conducted a survey about operators and users of container terminals in Gwangyang Port by deriving the factors determining the introduction of smart ports, such as cost, service, time, safety, and environment, from previous studies. This study analyzed the factors determining the introduction of smart ports and moderating effects when the adjustment variables of operators and users were applied to the pros and cons. As a result of the analysis, it was found that port operators and users have a moderating effect on cost, time, safety, and environmental factors, but not on service factors. These results indicate that port operators try to reduce costs through efficient operation, time management, and by reducing safety accidents by building smart ports, but analysis showed that the negative effects of smart ports have affected port users. The results of this study were derived through a moderated regression analysis and suggested implications for introducing smart ports in the conclusion.