• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1091-1096
• /
• 2010

This study was conducted to provide reference data for designing an alarm system that can help prevent the overturning of a container crane under wind load. Two methods, namely, fluid-structure interaction (FSI) analysis and windtunnel test, were adopted in this investigation. To evaluate the effect of wind load on the stability of the crane, a 50-ton-class container crane that is widely used in container terminals was adopted as the analysis model and 19 values were considered as design parameters for wind direction. First, the wind-tunnel test for the reduced-scale container crane model was performed according to the wind direction by using an Eiffel type atmospheric boundary-layer wind tunnel. Next, the FSI analysis for the real-scale container crane was conducted using ANSYS and CFX. Then, the uplift force determined from the FSI analysis was compared with that determined from the wind-tunnel test. Finally, a formula to compensate for the difference between the results of the FSI analysis and the wind-tunnel test was proposed.

• Journal of Korea Port Economic Association
• /
• v.28 no.2
• /
• pp.179-194
• /
• 2012

In this study, we compared the efficiency of container terminals using DEA. To do this, we designed an AHP/DEA hybrid model using AHP and DEA, and evaluated the efficiency by comparing the container terminal operation company in Gwangyang(KEC, KIT, GICT) and Busan(HBCT, DPCT, KBCT, UPT, Gamman, PNC, PNIT, HJNC, HPNT). The proposed model can control the number of selected promising container terminal by applying DEA-AR model. This model can also improve the credibility of analysis by using objective weights through the AHP application to efficiency evaluation data and normalizing the evaluation data to apply AHP and DEA. The model assumes inputs to be container crane, transfer crane, yard tractor, and reach stacker and output as container traffic. The result shows that DPCT was an efficient DMU.

• Journal of Digital Convergence
• /
• v.11 no.1
• /
• pp.211-223
• /
• 2013

In Korea, the location of yard tractors is figured out in real time by using RFID system in container terminals. However, even though the location recognition of RFID system works fine when transfer crane is in yard operation, there are some problems when container crane is in ship operation. That is because yard tractors come one by one to each transfer crane in an order, but yard tractors come in 4 lanes to the container crane, which makes the system impossible to recognize each yard tractor separately. Therefore, we developed the infrared-ray communication system which can recognize yard tractors accurately in not only in the yard operation of transfer crane but also in the ship operation of container crane in same way in this study. The result in this study showed constant number of recognition, and the range of recognition measures 5.7m in 25m distance. The range of recognition shown in this study is enough to recognize each yard tractor passing under container crane separately.

• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.181-186
• /
• 2020

Until now, the development of design and operation model for automated container terminals has been mainly performed based on the western ports model, specializing in basic loading, and discharging operations. In the case of the Busan port, terminal operators provide basic stevedoring, as well as an additional logistics service known as 'On Dock Service' not suitable for the currently commercialized automated container terminal model. This study diagnosed the current Busan port's throughput structure and terminal operational characteristic, and proposed a modified perpendicular layout container terminal transport model named 'Interchange Transport Model' for effective management of empty container and operation costs. Although the 'Interchange Transport Model' requires an additional number of transport equipment (AGV), concerning operational efficiency and cost saving, a simulation showed 22% reduction of TAT and 9.4% reduction of annual terminal operational costs in comparison to the basic perpendicular layout model.

• IE interfaces
• /
• v.20 no.4
• /
• pp.469-478
• /
• 2007

Rail transportation terminals play an important role in inland transportation systems, because the operation productivity in the terminals significantly influences the efficiency of the whole transportation systems. This paper addresses a design method of a real rail terminal that satisfies a pre-specified throughput capacity. In order to construct high performance rail terminal, it is shown how design parameters can be estimated systematically. Examples of the design parameters are the number of transshipment tracks, the number of rail cranes, and the number of internal trucks. These design parameters are estimated by using simple equations and the validity of the values of these parameters are tested by using simulation. Furthermore, some iterative correction procedure, which uses the simulation technique and the equations alternately, are proposed.

• Journal of Navigation and Port Research
• /
• v.30 no.9
• /
• pp.773-777
• /
• 2006

Significant increase of container flows in the marine terminals requires more efficient port equipments such as logistic and transfer systems. This paper presents collision avoidance and routing approach based on dynamic programming (DP) algorithm for a linear motor based shuttle car which is considered as a new transfer system in the port terminals. Most of routing problems are focused on automatic guided vehicle (AGV) systems, but its solutions are hardly utilized for LM based shuttle cars since both are mechanically different. Our proposed DP is implemented for real-time searching of an optimal path for each shuttle car in the Agile port terminal located at California in USA.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.175-181
• /
• 2010

The government have plans to improve the railway transport capacity and transport hub for the sustainable national transport and logistics system. Specially, there are much efforts to improve transportation capacity such as high speed transportation of rail freight, enlargement of BT train, development of double stack train, etc. between railway transport hubs. If the transport capacity between railway logistics hubs is increased as planned, we must increase the handling capacity of railway hub terminals. But there are limits to enlarge the terminal infrastructure because of investment scale, location circumstances and urban development plans. To ensure the capacity, with the minimum required enlargement of infrastructure, it is necessary to extremely increase the efficiency of terminal operations. For improving the efficiency, we have to introduce the efficient terminal operation systems based on u-IT and operation optimize technologies. In this paper, we analyse the issues and problems of railway terminals(including ICD) and suggest the concept of intelligent railway terminal and the construction components of technology.

• IE interfaces
• /
• v.16 no.1
• /
• pp.34-43
• /
• 2003

The Korean government has been working to reduce national logistics costs since the early 1990s. One of the major plans instituted by the government was to build five complex freight terminals using ICDs(inland container depots) as hub inland terminals. This paper explains the process and the methods adopted for site selection, with special focus on the Youngnam Freight Terminal. Among nineteen developable sites in Youngnam region, four candidates were selected based on the Map Overlay Approach under several criteria, including land acquisition costs, proximity to major highways and railroads, suitability of the terrain, etc. In this study, we used the AHP to select the best site among the four sites.

• Journal of Korea Port Economic Association
• /
• v.26 no.1
• /
• pp.144-171
• /
• 2010

The purpose of this study is to propose the effective method to improve the competitive power in the Busan container terminal. To achieve this, we analyzed the present of the shift pattern in the container terminal, and identified the problems in the pattern. This study shows the issues of shift pattern for field employee in Busan container terminal and also improvement plan to solve them. We suggested two approaches as an effective approach; the flexible use of employees through overtime, use of workers pool among terminals, and outsourcing; the promotion of welfare by leisure, fitness, and community service.

• Journal of Navigation and Port Research
• /
• v.38 no.2
• /
• pp.155-162
• /
• 2014

In container terminals, stacking yard is the place where import and export containers are temporarily stored before being loaded onto or after being discharged from a ship. Since all the containers go through the stacking yard in their logistic flow, the productivity of the terminal critically depends on efficient operation of stacking yard, which again depends on how well the stacking locations of the incoming containers are determined. However, a good location for stacking an incoming container later can turn out to be a bad one when that container is to be fetched out of the stacking yard, especially if some rehandling is required. This means that good locations for the containers are changing over time. Therefore, in most container terminals, the so-called remarshaling is done to move the containers from bad location to good locations. Although there are many previous works on remarshaling, they all assume that the remarshaling can be done separately from the main jobs when the cranes are idle for rather a long period of time. However, in reality, cranes are hardly available for a period long enough for remarshaling. This paper proposes a crane dispatching strategy that allows remarshaling jobs to be mixed together with the main jobs whenever an opportunity is detected. Experimental results by simulation reveals that the proposed method effectively contributes to the improvement of terminal productivity.