• 전력전자학회논문지
• /
• 제14권3호
• /
• pp.251-259
• /
• 2009

본 논문에서는 비접촉 시스템에 있어서 스위칭 소자의 영 전압 스위칭(ZVS)뿐만 아니라 2차측 정류 다이오드 역시 영 전류 스위칭(ZCS)을 이룰 수 있는 비접촉 변압기를 이용한 Half-Bridge 직렬 공진 컨버터 적용 비접촉 충전 시스템을 제안 적용하였다. 본 논문에서 제안한 비접촉 변압기 적용 Half-Bridge 직렬 공진컨버터는 공진 주파수보다 낮은 영역에서 스위칭 동작이 가능하기 때문에 불연속 공진전류에 의한 2차측 정류 다이오드의 영 전류 스위칭(ZCS)이 가능하다. 또한 좁은 주파수 영역에서 제어가 가능하며 높은 전압 이득특성에 따라 적은 턴-수비의 변압기를 사용할 수 있으므로 기존의 비접촉 시스템과 비교해 보았을 때 효율특성을 개선시킬 수 있다. 시뮬레이션과 이론적인 분석을 토대로 3.15W 시제품을 제작하고 실험내용을 서술했다.

• 한국컴퓨터정보학회논문지
• /
• 제27권3호
• /
• pp.33-43
• /
• 2022

본 논문에서는 기존의 스마트폰 카메라 센서를 사용하여 비접촉식 손바닥 기반 사용자 식별 시스템을 구축하기 위해 Attention U-Net 모델과 사전 훈련된 컨볼루션 신경망(CNN)이 있는 다채널 손바닥 이미지를 이용한 앙상블 모델을 제안한다. Attention U-Net 모델은 손바닥(손가락 포함), 손바닥(손바닥 미포함) 및 손금을 포함한 관심 영역을 추출하는 데 사용되며, 이는 앙상블 분류기로 입력되는 멀티채널 이미지를 생성하기 위해 결합 된다. 생성된 데이터는 제안된 손바닥 정보 기반 사용자 식별 시스템에 입력되며 사전 훈련된 CNN 모델 3개를 앙상블 한 분류기를 사용하여 클래스를 예측한다. 제안된 모델은 각각 98.60%, 98.61%, 98.61%, 98.61%의 분류 정확도, 정밀도, 재현율, F1-Score를 달성할 수 있음을 입증하며, 이는 저렴한 이미지 센서를 사용하고 있음에도 불구하고 제안된 모델이 효과적이라는 것을 나타낸다. 본 논문에서 제안하는 모델은 COVID-19 펜데믹 상황에서 기존 시스템에 비하여 높은 안전성과 신뢰성으로 대안이 될 수 있다.

• Clinical and Experimental Reproductive Medicine
• /
• 제27권1호
• /
• pp.39-46
• /
• 2000

Objective: A number of studies to improve in vitro culture conditions have been tried over past ten years by using co-culture system with helper somatic cells. However, the mechanism of coculture is poorly understood. This study was designed to understand the mechanism for the mode of actual action of co-culture using co-culture system of ICR strain's 1-cell embryos with human oviduct epithelial cells by examining the effect of conditioned medium and contactless coculture using a cell culture insert on the embryo development and by measuring the level of superoxide anion from conditioned medium after co-culture. Methods: ICR strain's zygote embryos were cultured in medium alone (control), coculture, conditioned medium, or contactless coculture system for 6 days. Conditioned media (CM) were prepared as following 5 groups. All CM were collected after culturing oviduct cells for 2 days. CM-1 was stored at $-20^{\circ}C$ until use, and CM-2 was prepared just before use as a culture medium. CM-3 was cocultured with embryos and retrieved just before use. CM-4 and CM-5 were derives from the microfilteration of CM-2 and CM-3, respectively, using Microcon-10 (10 kDa molecular weight cut-off). The percentage of the embryos developed to hatched blastocyst stage and the level of superoxide anion in supernatant from medium alone culture (control), coculture, and contactless coculture were measured. Results: The rates of embryo development to the hatched blastocyst stage were significantly higher in coculture (43%) than in control (0%) (p<0.05). The CM-1 group had no embryo development since 2-cell embryonic stage, whereas the CM-2, CM-3, CM-4 and CM-5 groups had the improved development to 4 or 8 cell embryo stage, but the similar rate of development to hatched blastocyst compared to control. The effect of coculture on embryo development was disappeared in the contactless coculture group. The level of superoxide anion was significantly reduced in coculture group compared to control. Conclusion: It is concluded that the present coculture system overcomes the 2-cell block in vitro and improves the embryo development. This beneficial effect may be due to the direct cell-cell contact between embryo and helper cells or the removal of deleterious components from medium rather than the embryotrophic factors.

• 한국멀티미디어학회논문지
• /
• 제17권8호
• /
• pp.937-945
• /
• 2014

Multi-modal biometric system can use another biometric trait in the case of having deficiency at a biometric trait. It also has an advantage of improving the performance of personal identification by using multiple biometric traits, so studies on new biometric traits have continuously been performed. The inner face of finger is a relatively new biometric trait. It has two major features of knuckle lines and wrinkles, which can be used as discriminative features. This paper proposes a finger identification method based on displacement vector to effectively process some variation appeared in contactless hand image. At first, the proposed method produces displacement vectors, which are made by connecting corresponding points acquired by matching each pair of local block. It then recognize finger by measuring the similarity among all the detected displacement vectors. The experimental results using pubic CASIA hand image database show that the proposed method may be effectively applied to personal identification.

• 제어로봇시스템학회논문지
• /
• 제17권9호
• /
• pp.882-887
• /
• 2011

A spiral electrodynamic wheel is proposed as an actuator for the contactless conveyance of a conductive rod. When rotating the wheel around the rod, a radial force, a tangential force, and an axial force are generated on the rod and cause a screw motion of the rod. The rotation of the rod is the inevitable result due to traction torque of the wheel and the unintended motion to be excluded. However, the rotating speed of the rod should be measured without mechanical contact to be cancelled out through the controller, so the electrodynamic wheel is used as a sensor measuring the rotating speed of the rod indirectly as well as an actuator. In this paper, we model the magnetic forces by the proposed wheel theoretically and compare the derived model with simulation result by Maxwell, and analyze influences on the magnetic forces by key parameters constituting the wheel. The feasibility of the conveyance system is verified experimentally.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.102-105
• /
• 2005

For transferring the primary power to the secondary one, the high frequency series resonant converter has been widely used for the contactless power supply system. However, the high frequency series resonant converter has the disadvantages such as the low efficiency, the high voltage gain characteristics and deviation of the phase angle in the overall load range. To improve this disadvantage, In this paper, the characteristics of the high efficiency and unit voltage gain as well as in phase are revealed in the proposed three-level LCLC ( Inductor - Capacitor - Inductor -Capacitor)resonant converter. The results are verified on the simulation based on the theoretical analysis and the 4kW experimental prototype.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2015년도 제52차 하계학술대회논문집 23권2호
• /
• pp.159-160
• /
• 2015

본 논문에서는 사용자의 제스처를 인식하여 동작하는 비 접촉식 크로마키 시스템을 제안한다. 이를 위해서 키넥트 카메라로부터 깊이(depth) 이미지와 RGB 이미지를 입력받는다. 먼저 깊이 카메라와 RGB 카메라의 위치 차이로 인한 불일치(disparity)를 보정하고, 깊이 이미지에 대해 모폴로지 연산을 수행하여 잡음을 제거한 후 RGB 이미지와 결합하여 객체 영역을 추출한다. 추출된 객체영역을 분석하여 사용자 손의 위치와 모양을 인식하고 손의 위치와 모양을 포인팅 장비로 간주하여 크로마키 시스템을 제어한다. 실험을 통해 비접촉식 크로마키 시스템이 실시간으로 동작함을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.333-344
• /
• 2018

This proposed paper aims for the high efficiency contactless power transfer in household dc power distribution. A 300 W five-level diode clamped multi-level converter with 300 Vdc input dc link bus is employed for the power transferring task and the output voltage range is controlled at 48 Vdc. The inner and outer solenoid coils are used for inductive power transfer (IPT) transformer with the 200 kHz switching frequency for designed power density. Therefore, to achieve the converter efficiency above 95%, the LLC series resonant with fundamental harmonic analysis (FHA) and the calculated switching angles are used as an optimized tool for designing the system resonant tank. The validations of this approached topology are illustrated in both MATLAB/Simulink simulation and implementation.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2022년도 제66차 하계학술대회논문집 30권2호
• /
• pp.485-486
• /
• 2022

본 논문에서는 OpenCV를 통해 기존의 물리적 버튼 등을 이용한 접촉제어가 아닌 비접촉으로 제어할 수 있는 시스템을 설계하였다. 시스템은 디지털 입력이나 아날로그 입력 등 두 가지 형태로의 모든 입력이 가능하며, 현실 세계에서 사람들이 사용하는 입력 방식과 유사한 방식으로 제어를 하게 함으로써 사용에 대한 기술에 대한 거부감을 줄일 수 있었다. 시스템은 ESP32-CAM 보드와 영상 스트리밍 서버를 FastAPI로 구축해 원격으로 접속과 조작이 가능하도록 설계하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.535-544
• /
• 2008

Unlike MS(Magnetic Stripe), SMART CARD is equipped with COS(Chip Operating System) consisting of the Microprocessor and Memory where information can be stored and processed, and there are two types of cards according to the contact mode; the contact type that passes through a gold plated area and the contactless one that goes through the radio-frequency using an antenna embedded in the plastic card. the contactless IC card used for the transportation card was first introduced into local area buses in Seoul, and expanded throughout the country so that it has removed the inconvenience such as possession of cash, fare payment and collection. Focusing on the Seoul metropolitan area in 2004, prepaid and pay later cards were adopted and have been used interchangeably between a bus and subway. The card terminal compatible between a bus and subway is Proximity Integrated Circuit Card(PICC) as international standards(1443 Type A,B), communicates in the 13.56MHz dynamic frequency modulation-demodulation system, and adopts the Multi Secure Application Module(SAM). In the second half of 2009, the system avaliable nationwide will be built when the payment SAM standard is implemented.