DOI QR코드

DOI QR Code

Screw Motion and Control of Conductive Rod by Rotating a Spiral Electrodynamic Wheel

동전기 휠을 이용한 전도성 환봉의 나선형 운동과 제어

  • 정광석 (충주대학교 기계공학과)
  • Received : 2011.03.30
  • Accepted : 2011.06.30
  • Published : 2011.09.01

Abstract

A spiral electrodynamic wheel is proposed as an actuator for the contactless conveyance of a conductive rod. When rotating the wheel around the rod, a radial force, a tangential force, and an axial force are generated on the rod and cause a screw motion of the rod. The rotation of the rod is the inevitable result due to traction torque of the wheel and the unintended motion to be excluded. However, the rotating speed of the rod should be measured without mechanical contact to be cancelled out through the controller, so the electrodynamic wheel is used as a sensor measuring the rotating speed of the rod indirectly as well as an actuator. In this paper, we model the magnetic forces by the proposed wheel theoretically and compare the derived model with simulation result by Maxwell, and analyze influences on the magnetic forces by key parameters constituting the wheel. The feasibility of the conveyance system is verified experimentally.

Keywords

References

  1. T. Ohji, T. Shinkai, K. Amei, and M. Sakui, "Application of Lorentz force to a magnetic levitation system for a non-magnetic thin plate," Journal of Materials Processing Technology, vol. 181, pp. 40-43, 2007. https://doi.org/10.1016/j.jmatprotec.2006.03.046
  2. K. C. Lee, J. W. Moon, D. H. Koo, and M. C. Lee, "Magnetic levitated electric monorail system for flat panel display glass delivery applications," Journal of Institute of Control, Robotics and Systems, vol. 17, no. 6, pp. 566-572, Jun. 2011. https://doi.org/10.5302/J.ICROS.2011.17.6.566
  3. K. S. Jung, K. B. Shim, and S. H. Lee, "Contact-less conveyance of conductive plate by controlling permalloy sheet for magnetic shield of air-gap magnetic field from magnet wheels," Journal of Korea Society of Precision Engineering (in Korean), vol. 27, no. 7, pp. 109-116, Jul. 2010.
  4. D. F. Spicer, J. N. Sackett, and C. T. Black, "Precision X-Y positioning systems using linear induction motors," IEEE Colloquium on Limited Motion Electrical Actuation System, pp. 6/1-3, 1998. https://doi.org/10.1049/ic:19980931
  5. N. Fujii, K. Ogawa, and T. Matsumoto, "Revolving magnet wheels with permanent magnets," Electrical Engineering in Japan, vol. 116, no. 1, pp. 106-118, 1996. https://doi.org/10.1002/eej.4391160110
  6. J. Bird and T. A. Lipo, "Characteristics of an electrodynamic wheel using a 2-D steady-state model," IEEE Trans. on Magnetics, vol. 43, no. 8, pp. 3395-3405, 2007. https://doi.org/10.1109/TMAG.2007.900572
  7. J. H. Park and Y. S. Baek, "Parametric design of the levitation mechanism for maglev planar transportation vehicle," IEEE Trans. on Magnetics, vol. 40, no. 4, pp. 3069-3072, 2004. https://doi.org/10.1109/TMAG.2004.829262
  8. K. S. Jung, "Contact-less conveyance of conductive rod using a screw motion of permanent magnet array," Korea Patent 10-1003219, 2010.
  9. K. S. Jung and K. M. Won, "Methods for noncontact conveyance of conductive rod," Proc. of ICROS Annual Conference, pp. 596-597, May 2010.
  10. S. A. Nasar and I. Boldea, Linear Motion Electric Machines, John Wiley & Sons, USA, 1976.
  11. K. S. Jung, J. K. Park, and H. J. Kim, "Improvement of dynamic characteristic of large-areal planar stage using induction principle," Journal of Institute of Control, Robotics and Systems (in Korean), vol. 15, no. 7, pp. 675-682, Jul. 2009. https://doi.org/10.5302/J.ICROS.2009.15.7.675

Cited by

  1. A Spatial Stability of the Conductive Rod Conveyed by Double Electrodynamic Wheels vol.29, pp.8, 2012, https://doi.org/10.7736/KSPE.2012.29.8.873
  2. Non-Contact Manipulation of Conductive Rod using Axial Magnet Wheels vol.19, pp.7, 2013, https://doi.org/10.5302/J.ICROS.2013.13.1881