• 한국안광학회지
• /
• 제11권4호
• /
• pp.337-344
• /
• 2006

시력교정(라식, 라섹, 엑시머)수술이 근시환자의 삶의 질에 미치는 영향에 대하 기존 연구들이 있었으나, 수술을 받은 환자들을 대상으로 수술 전후의 삶의 질 변화를 조사하는데 그쳤다. 본 연구에서는 시력교정 수술을 받은 환자들과 수술을 받지 않고 안경이나 콘택트렌즈를 계속 착용하는 사람들의 삶의 질을 비교 분석하였다. 근시환자 470명에 시력관련 삶의 질을 평가하기 위하여 QIRC(The Quality of Life Impact of Refractive Correction)설문지를 한국어 번역판을 개발하여 사용하였다. 공분산분석(ANCOVA)을 이용하여 주요혼란변수를 보정 한 후 안경 및 콘택트렌즈 착용 자, 시력교정수술을 받은 자. 그리고 수술 후 안경을 재 착용하는 자 등 세집단간의 삶의 질을 비교한 결과 시력교정수술을 받은 군은 안경이나 콘택트렌즈로 교정을 받은 군에 비해서 삶의 질이 유의하게 높았다. 그러나 수술 후 근시로 이행하여 안경을 재 착용하게된 군의 삶의 질은 수술을 하지 않은 군보다 더 삶의 질이 낮은 것으로 조사되었다. 시력교정수술이 근시환자의 삶의 질에 미치는 영향을 평가하기 위해서는 시력교정수술 후에도 다시 안경을 착용해야 하는 경우 수술 전보다 삶의 질이 더 낮아질 수 있다는 점을 고려하여야 할 것으로 보인다.

• 대한화학회지
• /
• 제56권5호
• /
• pp.597-602
• /
• 2012

본 연구는 triacetoxyvinlysilane을 첨가제로 사용하여 교차결합제인 EGDMA (ethylene glycol dimethacrylate)와 HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), MA (methacrylic acid) 그리고 개시제인 AIBN (azobisisobutyronitrile)과 함께 공중합 하였다. 생성된 고분자의 물리적 특성을 측정한 결과, 함수율 35.63~32.44%, 굴절률 1.4382~1.4480, 가시광선 투과율 89.0~92.5%, 인장강도는 0.346~0.674 kgf를 나타내었다. 기본 모노머 조합에 triacetoxyvinlysilane을 첨가한 조합과 1%의 hexamethylene diisocyanate를 첨가하여 중합한 조합의 물성을 비교한 결과 hexamethylene diisocyanate 1%를 첨가하여 중합한 렌즈의 인장강도가 더 큰 값을 나타내었다. 본 실험결과로 볼 때 생성된 공중합체는 내구성 및 인장강도가 우수한 안의료용 렌즈 재료로 사용될 수 있을 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.204-204
• /
• 1999

The plasma source ion implantation(PSII) technique which is a method using high negative voltage pulse in plasma system has the potential to change the surface properties of polymer. PSII technique increase the surface free energy by introducing polar functional groups on the surface so that it improves reactivity, hydrophilicity, adhension, biocompatability, etc. However, the mobility of polymer chains enables the modified surface layers to adapt their composition to interfacial force. This hydrophobic recovery interrupts the stability of modified surfaces to keep for the long time. In this study, poly(methyl methacrylate)(PMMA), poly(2-hydroxyethyl methacrylate)(PHEMA), and polu(2-hydroxypropyl methacylate)(PHPMA) for contact lens application, were modified to improve the wettability with PSII technique and were investigated the surface stabilities. Polymer film was prepared with solution casting(3 wt.% solution) and was annealed at 11$0^{\circ}C$ under vacuum oven to remove solvent completely and to eliminate physical ageing. The thickness of the film measured by scanning electron microscopy (SEM) and surface profilometer was about 10${\mu}{\textrm}{m}$. Polymers were treated with different kinds of gases, pulse frequency, pulse with, pulse voltage, and treatment time. Even though PMMA, PHEMA, and PHPMA have similar repeat unit structure, the optimal treatment conditions and the tendency to hydrophobic recovery were different. PHPMA, more hydrophilic polymer than PMMA and PHEMA showd better wettability and stability after mild treatment. Surface tensions were obtained by water and diiodomethane contact angle measurements to monitor the relation between hydrophobic recovery and polymer structure. Different ion species in plasma change the polar component and dispersion component of polymer surface. For better wettability surface, the increase of polar component was a dominant factor. We also characterized modified polymer surfaces using x-ray photoelectron spectroscopy(XPS), secondary ion mass spectrometry(SIMS), Fourier Transform infrared spectroscopy(FT-IR), and SEM.

• 대한기계학회논문집B
• /
• 제38권4호
• /
• pp.329-335
• /
• 2014

본 연구의 목표는 주기적으로 강제 진동하는 소수성 표면위에 놓인 액적의 내부유동 특성을 이해하는 것이다. 액적의 공진주파수를 예측하기 위해서 고속카메라와 매크로렌즈를 사용하여 진동하는 소수성 표면위의 액적의 내부유동 특성을 확인하였다. 그 결과 특정 모드에서의 액적은 다양한 형상을 갖고 있으며 또한, 각각의 액적 내부에서 와류가 관찰 되었다. 일반적으로 유동흐름이 대칭축을 따라 위로 이동하고 액적상단에서 표면을 따라 접촉선부근으로 이동하였다. 반면에 모드 6과 모드 8에서는 아주 큰 와류가 생성되었다. 또한 유동속도가 모드 2보다 모드 4에서 더 빠르고 반면에 모드 6와 모드 8은 거의 비슷하였다.

• 통합자연과학논문집
• /
• 제6권1호
• /
• pp.1-7
• /
• 2013

Polyurethane resin containing isocyanate is marked by excellent tensile and mechanical strengths and this test aims to gauge its applicability as a medical high polymer. Tris [2-(acryloyloxy)ethyl]isocyanurate and hexamethylenediisocyanate were added to a basic mixing ratio of HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), NVP (n-vinyl-2-pyrrolidone) and crosslink agent, EGDMA (ethylene glycol dimethacrylate) with increasing proportions and copolymerized respectively. Also, the basic physical properties of the polymerized high polymers including refraction rate, tensile strength, light transmission and water content were measured to confirm that they are appropriate as hydrogelcontact lenses. After measuring the physical properties of high performance polymers produced by adding tris [2-(acryloyloxy) ethyl]isocyanurate, it was found that the average tensile strengths of sample TRIS1 to TRIS10 were between 0.285 and 0.612 kgf, while the average values of refractive index were ranged from 1.441 to 1.449 with water content from 30.00 to 37.35%.The measurement of physical properties of the copolymers generated by adding hexamethylenediisocyanate showed that the average tensile strength of sample HEXA1 to HEXA10 ranged from 0.267 to 1.742 kgf, the refractive index ranged from 1.443 to 1.475 and water contents were in the range of 21.22 to 35.58%. In all combinations the transmission rates satisfied the transmittance of general hydrogel contact lenses. From theresults, it is possible to conclude that the produced copolymers can be used as contact lens materials with excellent tensile strength.

• 대한화학회지
• /
• 제54권2호
• /
• pp.228-233
• /
• 2010

최근 금(Au)과 은(Ag) 나노입자는 항균성의 특징으로 다양한 분야에서 응용되고 있다. 본 연구는 HEMA (2-hydroxyethylmethacrylate), NVP (N-vinyl pyrrolidone) MMA (methylmethacrylate)에 금과 은 나노입자를 첨가하였으며, $70^{\circ}C$에서 약 40분, $80^{\circ}C$에서 약 40분 마지막으로 $100^{\circ}C$에서 약 40분 동안의 열처리 공정을 거쳐 공중합 하였다. 중합 과정을 거쳐 중합된 고분자를 통해 물리적 특성을 측정한 결과, 함수율 28.43% ~ 35.27%, 굴절률 1.429 ~ 1.440를 나타내었으며, 가시 광선 투과율 79.2% ~ 86.5% 그리고 인장강도 값은 0.125 kgf ~ 0.201 kgf을 나타내었다. 본 실험 결과로 볼 때 항균성을 가지면서 기존의 콘택트렌즈의 물리적 특성에도 부합되는 공중합체가 생성된 것으로 판단된다.

• Parasites, Hosts and Diseases
• /
• 제46권3호
• /
• pp.157-164
• /
• 2008

Three Acanthamoeba isolates (KA/E9, KA/E17, and KA/E23) from patients with keratitis were identified as Acanthamoeba triangularis by analysis of their molecular characteristics, a species not previously recognized to be a corneal pathogen. Epidemiologic significance of A. triangularis as a keratopathogen in Korea has been discussed. Morphologic features of Acanthamoeba cysts were examined under a microscope with differential interference contrast (DIC) optics. Mitochondrial DNA (mtDNA) of the ocular isolates KA/E9, KA/E17, and KA/E23 were digested with restriction enzymes, and the restriction patterns were compared with those of reference strains. Complete nuclear 188 and mitochondrial (mt) 16S rDNA sequences were subjected to phylogenetic analysis and species identification. mtDNA RFLP of 3 isolates showed very similar patterns to those of SH621, the type strain of A. triangularis. 16S and 18S rDNA sequence analysis confirmed 3 isolates to be A. triangularis. 18S rDNA sequence differences of the isolates were 1.3% to 1.6% and those of 16S rDNA, 0.4% to 0.9% from A. triangularis SH621. To the best of our knowledge, this is the first report, confirmed by 18S and 16S rDNA sequence analysis, of keratitis caused by A. triangularis of which the type strain was isolated from human feces. Six isolates of A. triangularis had been reported from contaminated contact lens cases in southeastern Korea.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.159-165
• /
• 2001

Recently Moire and PMP(Phase Measuring Profilometry) are adopted as a practical methodology for non-contact 3-D measurement of free surface. These methods extract the 3-D informations from the images of the object projected with stripe-pattern light. This paper presents a simple projector generating stripe-pattern light using expensive polygon mirror. In this projector, slit-beam is generated with a Laser diode and a rod lens and the laser diode is switched on/off synchronizing with the rotation of the polygon mirror. So its structure is very simple and light-weighted compared to the existent projection methods using several lenses and it is also easy to change the pitch and the phase of the stripe pattern. Experimental results show that the intensity profile of the stripe pattern can be approximated with sinusoidal curve by reducing the pitch of the stripe pattern.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.792-796
• /
• 2006

In recent years, the semiconductor industry and the optical industry is developed rapidly. The recent demand has expanded for optical components such as a optical lens, a optical semiconductor and a measuring instrument. Object transport systems are driven typically by the magnetic field and the conveyer belt. Recent industry requires more faster and efficient transport system. However, conventional transport systems are not adequate for transportation of optical elements and semiconductors. Because conveyor belts can damage precision optical elements by the contact force and magnetic systems can destroy the inner structure of semiconductor by the magnetic field. In this paper, the levitation transport system using ultrasonic wave is developed for transporting precision elements without damages. This transport system is using 2-mode ultrasonic wave excitation and flexural beam modes shapes are evaluated. It compared simulation results with experimental results

• 한국광학회지
• /
• 제19권2호
• /
• pp.116-121
• /
• 2008

본 연구는 2차원 PLS(Point Light Source) 배열과 디스플레이 장치의 조합을 통하여 시역형성용 광학판이 없는 3차원 영상을 재생하는 방법에 관한 것이다. PLS를 사용하여 3차원 영상을 디스플레이 하는 경우 기존의 시차장벽(parallax barrier), 렌티큘러(lenticular), 마이크로 렌즈(microlens lens) 등의 광학판을 사용할 때 발생하는 여러 가지 광학적 문제점 등을 해소할 수 있다. PLS로 사용된 LED 광원이 가져야 할 특성을 조사하였으며 PLS 배열을 통한 입체영상 디스플레이의 시역에 대해 실험을 통하여 입증 하였다.