• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.8
• /
• pp.1056-1061
• /
• 2000

Particles existing in a hard disk drive are known as a major source of TA(thermal asperity). Researchers have investigated how particles induce the TA phenomena, but have not verified yet the reason why and how particles are generated in a HDD. The objective of this study is to investigate why and how particles are generated, and in what condition, the largest number of particles is generated. The number of particles generated in a HDD was measured over the landing zone after various rest times of slider and during various motions and positions of slider. It is found that the large number of particles was generated when the HDD was turned on after a long rest time of slider and that a few of particles were continuously generated when the slider flied over the disk surface. It is thought that the number of particles generated in a HDD was related to the rest time of slider because the rest time of slider increased stiction, and that there were intermittent contacts between the slider and the disk surface when the slider flied over the disk surface.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1186-1191
• /
• 2003

The 40% of wall criterion, which is generally used for the plugging of steam generator tubes, may be applied only to a single crack. In the previous study, a total of 9 failure models were introduced to estimate the local failure of the ligament between cracks and the optimum coalescence model of multiple collinear cracks was determined among these models. It is, however, known that parallel axial cracks are more frequently detected during an in-service inspection than collinear axial cracks. The objective of this study is to determine the plastic collapse model which can be applied to the steam generator tube containing two parallel axial through-wall cracks. Nine previously proposed local failure models were selected as the candidates. Subsequently interaction effects between two adjacent cracks were evaluated to screen them. Plastic collapse tests for the plate with two parallel through-wall cracks and finite element analyses were performed for the determination of the optimum plastic collapse model. By comparing the test results with the prediction results obtained from the candidate models, a plastic zone contact model was selected as an optimum model.

• Mycobiology
• /
• v.36 no.4
• /
• pp.270-273
• /
• 2008

Trichoderma spp. cause large crop losses of the cultivated shiitake mushroom, Lentinula edodes. We bred several shiitake strains that are resistant to Trichoderma spp. using di-mon mating to establish a useful method for controlling the greenmold disease. We examined the competitive ability of L. edodes against Trichoderma spp. using a dual culture system to select resistant strains. By screening Trichoderma-resistant strains, we found that among 11 parental strains, 4 strains, including KFRI 36, were confirmed resistant strains. They showed especially strong resistance to T. harzianum, which formed deadlock after mycelial contact and then invaded into the territory of T. harzianum. KFRI 171 also showed resistance to T. atroviride strains. Among 13 strains, which were made by hybridization of shiitake strains, 5 were confirmed to be resistant to Trichoderma, including KFRI 58-1. Their resistance was not correlated to the resistant activity of their parents’ strains. Two strains lose resistance and two strains acquire resistance compared to their parents’ strains. In SEM observation, the mycelium of L. edodes at the interaction zone of Lentinula-Trichoderma was rugged and swollen by T. harzianum.

• Economic and Environmental Geology
• /
• v.29 no.1
• /
• pp.11-21
• /
• 1996

The first Mg-skarn minerals are found from magnetite ore deposits of the Janggun mine, Korea. The skarn minerals are composed of mostly chondrodite, olivine， chlorite, serpentine, phlogophite, talc, apatite, magnesite， dolomite, siderite and trace amount of clinopyroxene, amphibole, garnet, wollastonite associated with magnetite, pyrrhotite and pyrite. The skarn zone is developed in the magnetite deposits at the contact of the Mg-rich Janggun Limestone Formation and the Chunyang granite. The chondrodites are columnar and radial shapes and some of them show twins. The chemical compositions of twinning-type chondrodites have high FeO (4.63 to 5.6 wt%), MnO (0.26 to 0.46 wt%) and low MgO (55.02 to 56.18 wt%) relative to the radial-type chondrodites. Twinning in chondrodite has been formed in close relation to substitution between Mg and Fe + Mn in humite solid solution. Temperature, $-logfo_2$ and $X_{CO2}$ during the skarn stage of magnetite deposits from the Janggun mine range from 395 to $430^{\circ}C$, from 30.5 to 31.2 atm and from 0.06 to 0.09, respectively.

• Economic and Environmental Geology
• /
• v.17 no.2
• /
• pp.91-100
• /
• 1984

The Gwangyang gold deposits geologically consist of granitic gneiss, metatectic gneiss and porphyroblastic gneiss which correspond to Jirisan gneiss complex. The formations of Gyeongsang system lies unconformably on these gneisses and are intruded by diorite, porphyritic andesite and Bulgugsa granites. Goheung districts are composed of quartz schist, andesitic rock, tuff and granite. The Gwangyang gold deposits are gold bearing fissure filling veins. The vein thickness varies from 15cm to 40cm and they consist of 7-10 layers in parallel. The Goheung copper deposits are sulphide bearing quartz veln which filled the fracture in andesitic rock and biotite granite. The contact zone of these rocks is partially altered. The mineral paragenesis of the Gwangyang and Goheung districts is pyrite, arsenopyrite, pyrrhotite, chalcopyrite, sphalerite, galena, sericite, quartz and calcite. The variation trends of FMA and A'KF triangular diagrams and the differentiation index (norm, Q + Or + Ab) versus oxides diagrams is similar to the Gyeonsang basin igneous rocks. From the trace element analysis of 10 samples of country rocks, wall rocks and veins, the distribution of copper and lead contents display a correlative distribution pattern in relation to gold and silver. Homogenization temperature of fluid inclusions range from $200^{\circ}C$ to $270^{\circ}C$ in quartz from the Gwangyang gold vein and the size of fluid inclusion range from 0.01mm to 0.04mm. The fluid inclusions are mainly one or two phase and the filling degree of the inclusions varies from 85 to 95.

• Economic and Environmental Geology
• /
• v.26 no.4
• /
• pp.499-505
• /
• 1993

The Imgye hornblendites occur as intrusive sills or dykes within the mylonite zone developed along the contact boundary between Precambrian Jungbongsan granite and Cambrian Jangsan quartzite or Myobong slate formations. The hornlendites belong to the subalkaline and tholeiitic series. In tectonomagmatic discrimination diagrams such as $TiO_2-K_2O-P_2O_5$, 2Nb-Zr/4-Y and $TiO_2-10MnO-10P_2O_5$, the hornblendites are classified into continental- and island-arc tholeiites. The hornblendites show fractionated REE patterns with $(La/Yb)_{CN}$ ranging from 3.73-4.56. In incompatible element abundance variations, the hornblendites show distinctive positive and negative anomalies for Rb and Nb, respectively, and unfractionated patterns of immobile incompatible elements such as Y and Yb. The REE patterns of the hornblendites are also similar to those of typical continental back-arc tholeiites and those of the Precambrian Okbang amphibolites in the Socheon-meon, Bonghwa-gun. Accoiding to geochemical characteristics above-mentioned, the hornblendites seem to have been formed from tholeiitic magmas of depleted upper mantle source, contaminated by crustal material en route to continental back-arc basin.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.2
• /
• pp.235-241
• /
• 2004

The dissolved air flotation (DAF) process has been widely used for removing suspended solids with low density in water. It has been known as measuring the size of microbubbles precisely which move upward rapidly in contact zone is difficult. In this study particle counter monitoring (PCM) method is used to measure the rising microbubble after injection from a nozzle. Size and distribution curve of microbubbles are evaluated at different conditions such as pressure drop at intermediate valve, length of pipeline between saturation tank and nozzle and low pressure. And the efficiency is also checked when it collides with different size floc. The experimental results show the following fact. As the final pressure drop occurred closer to a nozzle, the bubble size became smaller. And small bubble collides with large floc as well as small one because of its physical characteristic. However large bubble collides well with large floc rather than small one since hydrodynamic flow in streamline interferes to collide between two. With performing computational process by mathematical model we have analyzed and verified the size effect between bubble and floc. Collision efficiency is the highest when P/B ratio shows in the range of 0.75 < P/B ratio ($R_{particle/Rbubble}$) < 2.0.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.5
• /
• pp.1218-1226
• /
• 1994

The shock tube is a useful device for investigating shock phenomena, spray combustion, unsteady gas dynamics, etc. Therefore, it is necessary to analyze exactly the flow phenomena in shock tube. In this study, the mechanics of its reflected shock zone has been investigated by using of the one-dimensional gas dynamic theory in order to estimate the transition from initial reflection of shock wave region. Calulation for four kinds of reflected shock tube temperature (i.e. (a) 1388 K (b) 1276 K (c) 1168 K (d) 1073 K) corresponding to the experimental conditions have been carried out sumarized as follows. (1) The qualitative tendency is almost the same as in that conditions in region of reflected wave region. (2) High temperature period (reflected shock wave temperature) $T_{5}$, exists 0-2.65 ms. (3) Transition period from temperature of reflection shock wave is far longer than the calculated one. This principally attributed to the fact that the contact surface is accelerated, also, due to the release of energy by viscoity effect. This apparatus can advance the ignition process of a spray in a ideal condition that involved neither atomization nor turbulent mixing process, where, using a shock tube, a column of droplets freely from atomizer was ignited behind a reflected shock.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.3
• /
• pp.72-78
• /
• 2010

This paper presents a design approach of driving system for tidal flat vehicle. Firstly, topographic and geological survey of tidal flat zone was accomplished. 'Anac' located in the west-south coast of South Korea was chosen for the survey area. From the survey, the basic design data such as distribution of gullies size and bearing pressure was obtained. To figure out the shape of driving system, numerical simulations were carried out. Through the numerical dynamic simulations using $Recurdyn^{TM}$, the performance of various concepts of driving system was analyzed. From the results, we propose the conceptual design with the functions: a) low contact pressure, b) powerful driving force transmission, c) adaptation to the ground undulation. To satisfy these functional requirements, the driving system adopts rubber tracks, sprockets, tires and suspensions. The static structural analysis of the frame structure was executed as well, from which the detailed design was drawn out. To validate the performance of the designed driving system, the test vehicle which has gasoline engine of 27HP and mechanical transmission was constructed. The driving tests of the vehicle were performed twice at the "Anac" area, and unveiled its capability.

• Korean Institute of Interior Design Journal
• /
• v.23 no.1
• /
• pp.152-161
• /
• 2014

Beijing, the capital city of China, has gradually increased its amount of culture space and has also introduced a diverse range of cultural facilities to improve the satisfaction of its citizens lives. In particular are its art museums, which are a symbol of the urban culture and enrich the cultural life of its citizens and are also expected to play a role as a psychological pivot point. However, in comparison with the characteristics of various ethics, local, and the influence on the museums of China, studies which analyze the exterior of the art museums are not sufficient. This is because previous research has focused too heavily on the interior of the art museums. This paper aims to derive distinction through the analysis of the exterior of several art museums and present design factors and application methodology. This research looks at art museums in China and analyzes the current state of the art museums that have been developed based on the culture of Beijing. Through analyzing the case study of five art museums that have been selected in Beijing we can improve our understanding of Chinese culture space and derive distinct design factors. Distinct factors in the exterior of art museums include connection, culture, geographic features, public, and creation. This study is expected to contribute to that exterior of the art museum will be as a contact zone to form a spatial connection and a cultural symbol that can reflect Beijing's unique culture characteristics.