• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.214-219
• /
• 2001

In this study, numerical investigation has been performed on the spreading and solidification of a droplet impacting onto a solid substrate in the thermal spray process. The finite difference method with volume-of-fluid approach is used to analyze the free surface flow and the source-based enthalpy method is employed to model the latent heat release during the solidification. In this work, the numerical model is validated through the comparison of the present numerical result with experimental data available for the flat substrate.

• 대한기계학회논문집B
• /
• 제26권11호
• /
• pp.1597-1604
• /
• 2002

In this study, numerical investigation has been performed on the impingement, spreading and solidification of a coating material droplet impacting onto a solid substrate in the thermal spray process. The numerical model is validated through the comparison of the present numerical result with experimental data fer the flat substrate without surface defects. An analysis of deposition formation on the non-polished substrate with surface defects is also performed. The parametric study is conducted with various surface defect sizes and shapes to examine the effect of surface defects on the impact and solidification of the liquid droplet on the substrate.

• Bulletin of the Korean Chemical Society
• /
• 제27권10호
• /
• pp.1651-1654
• /
• 2006

Field emission (FE) currents were measured for silver-pasted and glass-pasted single-walled carbon nanotubes (SWNTs) after illuminating the tubes with a pulsed 532 nm laser. A very low turn-on field of approximately 0.4 V/m m and a high current density ~1700 $\mu A/cm^2$ at 3.5 V/m m was obtained for the silver-pasted SWNTs after laser irradiation but on the whole, no improvements were found for the glass-pasted SWNTs. Two roles of laser irradiation for the silver-pasted SWNTs were proposed. First, the embedded SWNTs and SWNT bundles inside the silver paste were immerged on the outer surface due to an instantaneous melting or annealing of the silver metals by the laser resulting in an increase of the field emission sites. Second, the laser irradiation was thought to improve the electrical contact between SWNTs and the silver metal by reducing the contact resistance via laser-induced thermal annealing, which was responsible for increasing the FE currents.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.145-150
• /
• 2003

In this paper we have studied the characteristics of temperature fields in a Molded Case Circuit Breaker (MCCB). A switch and a trip device are arranged in narrow space of the MCCB. Thus, thermal factors have been risen to important problem. The temperature rise means an energy loss and it becomes the reason of fatal fault in devices. Also, the temperature rise on the connection and the contact parts is regulated up to $115^{\circ}C$ and $105^{\circ}C$, respectively. Therefore, a study for preventing the temperature rise should be investigated. A numerical analysis method that has confidence might be preceded for this purpose. In order to verify the confidence of temperature field analysis, the results of the numerical analysis are compared with those of experimental one for the same model. Comparison results show a qualitatively good agreement within ${\pm}5%$ errors.

• 한국전기전자재료학회논문지
• /
• 제20권3호
• /
• pp.234-239
• /
• 2007

This paper describes the TiW ohmic contact characteristics under the surface treatment of the polycrystalline 3C-SiC thin film grown on $SiO_2/Si(100)$ wafers by APCVD. The poly 3C-SiC surface was polished by using CMP(chemical mechanical polishing) process and then oxidized by wet-oxidation process, and finally removed SiC oxide layers. A TiW thin film as a metalization process was deposited on the surface treated poly 3C-SiC layer and was annealed through a RTA(rapid thermal annealing) process. TiW/poly 3C-SiC was investigated to get mechanical, physical, and electrical characteristics using SEM, XRD, XPS, AFM, optical microscope, I-V characteristic, and four-point probe, respectively. Contact resistivity of the surface treated 3C-SiC was measured as the lowest $1.2{\times}10^{-5}{\Omega}cm^2$ at $900^{\circ}C$ for 45 sec. Therefore, the surface treatments of poly 3C-SiC are necessary to get better contact resistance for extreme environment MEMS applications.

• 한국전기전자재료학회논문지
• /
• 제15권5호
• /
• pp.449-454
• /
• 2002

The use of a thin film of indium between the ITO and the $n^+-lnP$ contact layers for InP/InGaAs HPTs was studied without degrading its excellent optical transmittance properties. $ITO/n^+-lnP$ ohmic contact was successfully achieved by the deposition of indium and annealing. The specific contact resistance of about $6.6{\times}10^{-4}\Omega\textrm{cm}^2$ was measured by use of the transmission line method (TLM). However, as the thermal annealing was just performed to $ITO/n^+-lnP$ contact without the deposition of indium between ITO and $n^+-lnP$, it exhibited Schottky characteristics. In the applications, the DC characteristics of InP/InGaAs HPTs with ITO emitter contacts was compared with those of InP/InGaAs HBTs with the opaque emitter contacts.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.237-238
• /
• 2008

본 연구에서는 APD 소자 제작시 주로 쓰이는 RTA에 의한 Zn 확산방법에 사용할 경우 undoped InP의 V/III비율에 따른 Zn원자의 확산, 도핑, 오믹저항의 성장을 조사하였다. RTA에 의한 확산 및 활성화 열처리 시 도핑 농도의 프로파일은 확산열처리만 한 경우보다 활성화 처리한 경우 더 커짐을 볼 수 있었다. SIMS 결과 활성화 처리 후 표면쪽에 Zn원자의 약간의 결핍현상을 보이는 데 이는 표면쪽에 Zn원자의 탈착이 약간 이루어지는 것으로 보인다. 이 원인은 결과적으로 오믹저항의 증가를 가져왔다.

• 마이크로전자및패키징학회지
• /
• 제13권2호
• /
• pp.21-26
• /
• 2006

NCA의 물성이 미세피치 Chip on glass (COG) 접합부의 신뢰성에 미치는 영향을 연구하였다. Si 위에 Sn을, 유리기판 위에 In을 열증발 방법으로 증착하고 lift-off 방법을 이용하여 $30{\mu}m$ 피치를 가지는 솔더범프를 형성하였으며 열압착 방법으로 $120^{\circ}C$에서 In 범프와 Sn 범프를 접합하였다. 접합할 때 세 종류의 Non conductive adhesive (NCA)를 적용하였다. 신뢰성은 $0^{\circ}C$와 $100^{\circ}C$ 사이로 열충격시험을 2000회까지 실시하여 평가하였다. 4단자 저항측정법을 이용하여 접합부의 저항을 측정하였다. 필러의 양이 증가할수록 열충격시험 후 접합부의 저항이 가장 적게 증가하여 신뢰성이 우수하였다. 필러의 양이 증가할수록 NCA의 열팽창이 작아지기 때문이다.

• 한국재료학회지
• /
• 제16권9호
• /
• pp.564-570
• /
• 2006

Silicides have been required to be below 40 nm-thick and to have low contact resistance without agglomeration at high silicidation temperature. We fabricated composite silicide layers on the wafers from Ni(20 nm)/Co(20 nm)/poly-Si(70 nm) structure by rapid thermal annealing of $700{\sim}1100^{\circ}C$ for 40 seconds. The sheet resistance, surface composition, cross-sectional microstructure, and surface roughness were investigated by a four point probe, a X-ray diffractometer, an Auger electron spectroscopy, a field emission scanning electron microscope, and a scanning probe microscope, respectively. The sheet resistance increased abruptly while thickness decreased as silicidation temperature increased. We propose that the fast metal diffusion along the silicon grain boundary lead to the poly silicon mixing and inversion. Our results imply that we may consider the serious thermal instability in designing and process for the sub-0.1 um CMOS devices.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.114-114
• /
• 2000

III-nitride 게 물질들은 blue와 UV 영역의 LED, LD와 같은 광소자뿐만 아니라 HBT, FET와 같은 전자소자로도 널리 응용되고 있다. 이와 같은 물질을 이용한 소자를 제작할 경우 낮은 저항의 ohmic contact은 필수적이다. p-GaN의 ohmic contact은 아직까지 많은 문제점을 내포하고 있다. 그 중의 하나는 높은 doping 농도(>1018cm-3)의 p-GaN 박막을 성장하기가 어렵다는 것이며, 또 하나는 낮은 접촉 비저항을 얻기 위해선 7.5eV 이상의 큰 재가 function을 지닌 금속을 선택해야 한다. 그러나 5.5eV 이상의 재가 function을 갖는 금속은 존재하지 않는다. 위와 같은 문제점들은 p-GaN의 접촉 비저항이 10-2$\Omega$cm2이상의 높은 값을 갖게 만들고 있으며 이에 대한 해결방안으로는 고온의 열처리를 통하여 p-GaN와 금속사이에서 화학적 반응을 일으킴으로써 표면근처에서 캐리어농도를 증가시키고, 캐리어 수송의 형태가 tunneling 형태로 일어날 수 있도록 하는 tunneling current mechaism을 이용하는 것이다. 이에 본 연구에서는 MOCVD로 성장된 p-GaN 박막을 Mg의 activation을 증가시키기 위해 N2 분위기에서 4분간 80$0^{\circ}C$에서 RTA로 annealing을 하였으며, ohmic 접촉을 위한 금속으로 높은 재가 function과 좋은 adhesion 그리고 낮은 자체저항을 가지고 있는 Ni/ZSi/Ni/Au를 ohmic metal로 하여 contact한 후에 $700^{\circ}C$에서 1분간 rapid thermal annealing (RTA) 처리를 했다. contact resistance를 계산하기 위해 circular-TLM method를 이용하여 I-V 특성을 조사하였고, interface interaction을 알아보기 위해 SEM과 EDX, 그리고 XRD로 분석하였다. 또한 추가적으로 Si 계열의 compound metal인 PdSi와 PtSi에 대한 I-V 특성도 조사하여 비교하여 보았다.