초 고집적 회로의 시대로 접어들면서 지금까지의 금속선 형성 기술 및 배선 재료에 많은 문제점들이 나타나고 있다. 알루미늄의 대체 재료로서 검토되고 있는 구리를, 전기 화학적 방법에 의해 미세 접촉창에 선택적으로 충전함으로써 새로운 금속선 형성 기술을 제시하고자 하였다. 0.75M의 황산구리 수용액을 전해액으로 사용하여 p형 (100) 규소 박판위에 구리 전착막을 형성한 후 Alpha Step, 주사 전자 현미경, 4-탐침법을 사용하여 막의 두께, 입자 크기, 비저항을 측정함으로써 전착 시간, 전류 밀도, 첨가물로 사용한 젤라틴 농도가 전착막의 성질에 미치는 영향에 대해 조사하였다. 평균 전착 속도는 전류 밀도가 $ 2A/dm^2$일 때 0.5-0.6\mu\textrm{m}$/min 였고 구리 입자의 크기는 전류밀도 증가에 따라 증가하였다. 입자 크기 $4000{\AA}$이상에서 얻어진 비저항값은 3-6 Ω.cm였다. 젤라틴을 첨가하여 입자의 크기를 $0.1\mu\textrm{m}$이하로 감소시킴으로써 크기 $1\mu\textrm{m}$이하의 접촉장에 구리를 선택적으로 충전시키는데 성공하였다.
The purpose of this study is to examine the effect of the health status on the quality of life of the rural elderly, and to examine the conditional effect of socialsupport for that influence. 'Quality of life' used in this study was defined by unidimensional approach. The data were collected by conducting individual interviews with 296 rural elderly people aged 60 and the above who were living in one township of Kangwondo, between the time period of October and November 1995. The main findings are as follows: 1. Hierarchical regression analyses were carried out to examine the relative contribution of three set of variables on the quality of life. The first step, which included sociodemographic factors showed that the coefficient of determination (R$^{2}$) was 8% and income was a statisically significant variable. The second step, by adding health related factors, revealed that the R$^{2}$ was increased to 34% by 26% point and the degree of health recognition was the statistically significant variable. The third step, by projecting additionall social support related variables revealed that the R$^{2}$ was 42% 2. The conditional effect of social support was analyzed to examine the influence the health status has on the quality of life. The results are as follows: 1) The IADL and the degree of social contact interacted, resulting in that the higher degree of social contact boosted the stronger effect of IADL. 2) The effect of subjective health recognition on the quality of life is depended upon degree of family ontact. 3) The effect of eyesight on the quality of life is depended upon degree of satisfaction in social relation. The lower the degree of social support was, the bigger the influence of health related variables affecting quality of life became. This study explains that health status is a major factor in predicting the quality of life of the aged. Particularly the subjective health recognition was an important factor as the perception of quality of life.
Kang, Dong-Hyun;Pak, Soo-Kyung;Park, George O.;Hong, Sang-Jeen
한국진공학회:학술대회논문집
/
한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
/
pp.433-433
/
2012
As the requirement in patterning geometry continuously shrinks down, the termination of etch process at the exact time became crucial for the success in nano patterning technology. By virtue of real-time optical emission spectroscopy (OES), etch end point detection (EPD) technique continuously develops; however, it also faced with difficulty in low open ratio etching, typically in self aligned contact (SAC) and one cylinder contact (OCS), because of very small amount of optical emission from by-product gas species in the bulk plasma glow discharge. In developing etching process, one may observe that coupon test is being performed. It consumes costs and time for preparing the patterned sample wafers every test in priority, so the coupon wafer test instead of the whole patterned wafer is beneficial for testing and developing etch process condition. We also can observe that etch open area is varied with the number of coupons on a dummy wafer. However, this can be a misleading in OES study. If the coupon wafer test are monitored using OES, we can conjecture the endpoint by experienced method, but considering by data, the materials for residual area by being etched open area are needed to consider. In this research, we compare and analysis the OES data for coupon wafer test results for monitoring about the conditions that the areas except the patterns on the coupon wafers for real-time process monitoring. In this research, we compared two cases, first one is etching the coupon wafers attached on the carrier wafer that is covered by the photoresist, and other case is etching the coupon wafers on the chuck. For comparing the emission intensity, we chose the four chemical species (SiF2, N2, CO, CN), and for comparing the etched profile, measured by scanning electron microscope (SEM). In addition, we adopted the Dynamic Time Warping (DTW) algorithm for analyzing the chose OES data patterns, and analysis the covariance and coefficient for statistical method. After the result, coupon wafers are over-etched for without carrier wafer groups, while with carrier wafer groups are under-etched. And the CN emission intensity has significant difference compare with OES raw data. Based on these results, it necessary to reasonable analysis of the OES data to adopt the pre-data processing and algorithms, and the result will influence the reliability for relation of coupon wafer test and whole wafer test.
본 연구의 목적은 롤러 신발과 조깅 신발 착용 후 보행 시 운동학적 변인에 대하여 비교 분석 하는데 있다. 이를 위해 하지 근골격계에 이상이 없는 중학생 8명을 피험자로 선정하여 3차원 동작 분석을 실시하였다. 분석 결과, 활보장, 인체무게 중심변위 및 선속도, 관절각 및 각속도에서 집단 간 통계적으로 유의한 차이를 보였다. 특히 롤러 집단의 경우 지지 시 발목 관절각이 증가하고 무릎각의 각속도가 감소하는 결과를 나타내었다. 이는 롤러 신발의 경우 장착된 휠에 의해 지지 시 적절한 배측굴곡이 이루지지 못하고, 불안정성을 극복하기 위해 무릎의 과도한 굴곡이 나타난 것으로 사료되어 진다. 이러한 운동학적 변인의 차이는 롤러 신발 보행 시 정상 패턴과는 다른 불안정한 보행 동작을 유발시키고 이러한 동작이 지속적으로 이루어진다면 하지 근골격계에 변화를 유발시켜 부상 유발의 가능성이 있을 것으로 생각된다. 따라서 본 연구 결과를 토대로 향후 보다 안정성 높은 롤러 신발을 개발할 수 있을 것으로 기대된다.
Chlorantraniliprole은 곤충 근육의 $Ca^{2+}$ 농도를 조절하는 Ryanodine 수용기(RyR)에 작용 하는 diamide계통의 작물보호제이다. 최근에 보고된 chlorantraniliprole 저항성 배추좀나방 계통은 RyR에 돌연변이를 가지고 있다. 본 연구에서는 초파리를 모델 곤충으로 저농도와 고농도의 chlorantraniliprole로 도태된 두 종류의 저항성 계통을 확보하였다. 두 종류의 저항성 계통은 접촉독성과 섭식독성 평가법을 활용하여 저항성 지수를 산출하였다. 접촉 독성 평가에서 두 종류의 저항성 계통은 대조군과 비교하여 95% 신뢰구간에서 저항성 발달에 차이가 없었지만, 섭식 독성 평가의 경우에서는 고농도 저항성 계통과 저농도 저항성 계통에서 대조군 대비 각각 2.1배와 8.1배의 통계적으로 유의한 저항성 증가가 나타났다. 작용점 유전자인 RyR 발현량 비교 결과, 두 종류의 저항성 계통에서 RyR의 발현량이 유의하게 감소하였고, 주요 약제 관련 효소인 Acetylcholinesterase와 Glutathione-S-transferase 활성은 조직 특이적으로 증가하는 것을 확인하였다. 이러한 결과들은 초파리에서 chlorantraniliprole에 대한 섭식독성 저항성의 발달에는 주요 해독 관련 효소의 과활성도 관여할 것 임을 보여주고 있다.
본 실험에서는 Non-Conductive Adhesive (NCA) 와 고분자 범프를 이용한 COG (Chip-on-glass) 접합에 대하여 연구하였다. 산화막이 증착된 Si 기판 위에 고분자 범프를 사진식각 방법으로 형성하고, 고분자 범프 위에 직류 마그네트론 스퍼터링 방법으로 금속 박막층을 증착하였다. 기판으로는 Al을 증착한 유리기판을 사용하였다. 두 종류의 NCA를 사용하여 $80^{\circ}C$에서 하중을 변화시켜가며 접합을 실시하였다. 접합부의 특성을 평가하기 위하여 4단자 저항 측정법을 이용하여 접합부의 접속 저항을 측정하였으며, 주사전자현미경을 이용하여 접합부를 관찰하였다. 신뢰성은 $0^{\circ}C$ 와 $55^{\circ}C$ 사이에서 열충격 실험을 2000회까지 실시하여 평가하였다. 신뢰성 측정 전 접합부의 저항 값은 $70-90m{\Omega}$을 나타내었다. 200MPa 이상의 접합 압력에서는 고분자 범프가 NCA 의 필러 파티클에 의해 손상된 것을 관찰하였다. 신뢰성 측정 후 일부 범프가 fail 되었는데 범프의 fail 원인은 범프의 윗부분보다 상대적으로 금속층이 얇게 증착된 범프의 모서리 부분의 금속층의 끊어졌기 때문이었다.
Titanium and its alloys are finding increasing use in medical devices and dental implants. The strong selling point of titanium is its resistance to the highly corrosive body fluids in which an implant must survive. This corrosion resistance is due to a tenacious passive oxide or film which exists on the metal's surface and renders it passive. Potentiodynamic polarization measurement is one of the most commonly used electro-chemical methods that have been applied to measure corrosion rates. And the potentiodynamic polarization test supplies detailed information such as open circuit, rupture, and passivation potential. Furthermore, it indicates the passive range and sensitivity to pitting corrosion. This study was designed to compare the corrosion resistance of the commonly used dental implant materials such as CP Ti, Ti-6A1-4V, Co-Cr-Mo alloy, and 316L stainless steel. And the effects of galvanic couples between titanium and the dental alloys were assessed for their useful-ness-as. materials for superstructure. The working electrode is the specimen , the reference electrode is a saturated calomel electrode (SCE), and the counter electrode is made of carbon. In $N_2-saturated$ 0.9% NaCl solutions, the potential scanning was performed starting from -800mV (SCE) and the scan rate was 1 mV/sec. At least three different polarization measurements were carried out for each material on separate specimen. The galvanic corrosion measurements were conducted in the zero-shunt ammeter with an implant supraconstruction surface ratio of 1:1. The contact current density was recorded over a 24-hour period. The results were as follows : 1. In potential-time curve, all specimens became increasingly more noble after immersion in the test solution and reached between -70mV and 50mV (SCE) respectively after 12 hours. 2. The Ti and Ti alloy in the saline solution were most resistant to corrosion. They showed the typical passive behavior which was exhibited over the entire experimental range. Therefore no breakdown potentials were observed. 3. Comparing the rupture potentials, Ti and Ti alloy had the high(:st value (because their break-down potentials were not observed in this study potential range ) followed by Co-Cr-Mo alloy and stainless steel (316L). So , the corrosion resistance of titanium was cecellent, Co-Cr-Mo alloy slightly inferior and stainless steel (316L) much less. 4. The contact current density sinks faster than any other galvanic couple in the case of Ti/gold alloy. 5. Ag-Pd alloy coupled with Ti yielded high current density in the early stage. Furthermore, Ti became anodic. 6. Ti/Ni-Cr alloy showed a relatively high galvanic current and a tendency to increase.
Purpose : With increasing number of school accidents, it is crucial to find out necessity of first aid training among school health educator. This study has been conducted to have an clear idea on the demands and necessity for first aid training and what kind of training is most required from school health educator. Method : In this study, questionnaires from 87 school health educator in elementary, middle and high school health educator in the city D were analyzed. The survey was carned out from May 26, 2008 to June 7, 2008 and from the collected data, frequency, independent two samples t-test, paired T-test, one way ANOVA and pearson's correlation were conducted with SPSS 14.0. Result: 1. 51.61 % of nurse-teachers experienced emergency situations and the relations between the necessity they felt from experiencing those situations and demands for first aid training were not statistically meaningful(t=1.87, p= .175). 2. Necessity and demands for the first-aid training were checked with three point scale and there were statistical significance between the two with $2.44{\pm}.47$ and $2.24{\pm}.47$ respectively(t=3.275, p= .000). 3. 86.20%(75 persons) of the respondents have had received first aid training and the training they received were CPR 82.75%(72 persons), primary survey 81.60%(7l persons), contact to 911 79.30%(69 persons) and wounds treatment(lacerated wounds, bum and chilblains) 75.86%( 66 persons) in order. 4. As for the questions that ask on confidence of first-aid treatment, 80% answered they are confident on some limited kinds of treatments, 16% said they are confident and 4% answered they lack confidence. As for the treatment that they can show the highest confidence, wounds treatment topped the list with 93.24%, nose bleeding and removing foreign substance, and stanching followed the list with 82.43% and 81.08% respectively. 5. 97.67% of respondents said they were willing to take training and 89.62% answered to take the training to deal with emergency situations that are taking place in their schools. As for the question that asks for the most wanted treatments, CPR topped the list with 32.18%(28 persons) and treatment for obstruction of airway and shock followed the list with 35.63%(31 persons) and 27.59%(24 persons). Conclusion : Currently, first aid treatment has been centered on CPR, primary survey, contact to 119 and wounds treatment. However, since most of school health educator are fairly confident with wounds treatment, stanching and other first aids, in future training it will be more desirable to focus on CPR and treatment for obstruction of airway and shock that were shown to be most wanted by school health educator.
본 연구는 한국노인의 사회적 연계망 자체를 좀 더 심도있게 이해하기 위하여 2014년도 노인실태조사자료(65세 이상 10,279명)를 활용하여 관계망 크기, 연계와의 접촉 빈도, 연계에 대한 친밀도를 중심으로 잠재프로파일분석(LPA)을 실시하였다. 그 결과 노인의 사회적 연계망은 고립형(11.6%), 가족의례형(17.7%), 가족친밀형(23.6%), 제한적 다층친밀형(28.4%), 다층형(18.8%)의 다섯 개 유형으로 도출되었다. 또한 도출된 잠재집단 유형별 특징을 비교하였고, 사회적 관계망 유형에 영향을 미치는 요인을 분석하기 위한 다항로지스틱회귀분석을 실시하였다. 분석결과, 고립형 노인의 3/4은 여성이며 독거가구 비율이 약 절반을 차지하는 것으로 나타났다. 또한 상대적으로 평균연령이 높고, 도시지역에 거주하는 노인, 신체적 제한이 있는 노인, 사회적 지위가 낮은 직종에 종사한 노인이 고립형에 속할 가능성이 높은 것으로 나타났다. 반면 다층형의 경우 여성보다는 남성노인이, 연령이 낮을수록, 학력이 높을수록, 전문 관리 사무직에 종사한 노인일수록 다층형에 속할 가능성이 높았다. 한편 가족의례형과 가족친밀형은 배우자 혹은 자녀를 중심으로 연계망이 형성되어 있고, 노인부부가구의 비중이 높다는 공통점을 가지고 있으나, 가족의례형은 상대적으로 여성 비중이 높다는 특징이 있다. 그리고 제한적 다층친밀형은 배우자보다는 자녀와 친구 이웃과의 연계망의 크기, 빈도, 친밀도가 다층형 다음으로 높은 집단으로 여성노인 및 저학력이면서 농림어업에 종사한 비중이 높게 나타났다. 이러한 연구결과에 기초하여 노년기의 사회적 연계망 유형의 다양성이 갖는 학술적 및 정책적 함의와 향후 연구방향을 논의하였다.
본 논문에서는 레이저기반 응력측정을 위한 비접촉식 로드셀을 개발을 위하여, 실내실험을 통하여 기술을 검증하고, 실규모 실험을 통하여 문제점을 파악하였으며, 최종적으로 현장적용에 적합한 응력측정용 비접촉식 로드셀 프로토타입을 개발하였다. 이를 위하여, 중심공 압축타입의 로드셀 제작에 사용되는 로드셀 몸체 표면에 용사코팅기술을 이용하여 알루미나를 도포하고, 레이저를 기반으로한 압분광법을 이용하여, 비접촉식으로 응력을 계측하였다. 이때, 인가되는 응력과 스펙트럼 이동간의 관계가 선형임을 확인하였다. 해당 기술의 현장 적용성 확인을 위하여, 실규모 프리스트레스 콘크리트 시편을 제작하고, 레이저를 조사하여 인가된 응력을 확인하는 과정에서, 반복적인 상황 하에서 레이저 조사 위치가 동일해야 함을 확인하였다. 이를 보완하기 위하여 프로브를 고정할 수 있는 케이싱이 포함된 로드셀 프로토타입을 제작하였고, 실내일축압축시험을 통하여 압축력과 스펙트럼 이동간의 선형성을 확인하였다. 따라서, 본 연구를 통하여 개발된 비접촉식 로드셀을 이용하여, 압축력을 효과적으로 측정할 수 있을 것으로 기대된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.