• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.45-46
• /
• 2003

A process control system has been developed for measurement and characterization of the nanofiber web qualities. The nano-fiber information system (NAFIS) developed consists of a measurement device and an analysis algorithm, which are a microscope-laser sensor fusion system and a process information system, respectively. It has been found that NAFIS is so successful in detecting irregularities of pore and diameter that the resulting product has been quitely under control even at the high production rate. Pore distribution, fiber diameter and mass uniformity have been readily measured and analyzed by integrating the non-contact measurement technology and the random function-based time domain signal/image processing algorithm. Qualifies of the nano-fiber webs have been revealed in a way that the statistical parameters for the characteristics above are calculated and stored in a certain interval along with the time-specific information. Quality matrix, scale of homogeneity is easily obtained through the easy-to-use GUI information. Finally, ANFIS has been evaluated both for the real-time measurement and analysis, and for the process monitoring.

• 한국해양공학회지
• /
• 제24권4호
• /
• pp.72-77
• /
• 2010

This paper presents a method for measuring the shaft power of a marine main engine. Usually, in traditional systems for measuring shaft power, a strain gauge is used even though it has several disadvantages. First, it is difficult to set up the strain gauge on the shaft and acquire the correct signal for analysis. Second, it is very expensive and complicated. For these reasons, we investigated alternative approaches for measuring shaft power and proposed a new method that uses a vision-based measurement system. For this study, templates for image processing and CCD cameras were installed at the both ends of the shaft. Then, in order for the cameras to capture the images synchronously, we used a trigger mark and a optical sensor. The position of each template between the first and the second camera images were compared to calculate the torsion angle. The proposed measurement system can be installed more easily than traditional measurement systems and is suitable for any shaft because it does not contact the shaft. With this approach, it is possible to measure the shaft power while a ship is operating.

• 한국전기전자재료학회논문지
• /
• 제27권1호
• /
• pp.61-69
• /
• 2014

In this paper, we have researched semiconductor optical filters to solve the problem of the high failure rate that are recognize bad of financial account, jam of financial account and the ATM service interruption due to failure of accurate location information among the operation of the ATM (automatic teller machine) systems. A semiconductor optical filters that have high resolution and less diffuse, high transmittance are able to detect the information of financial account surface accurately. Therefore, it is a stable filter that is able to minimize the incidence of disability. In this paper, we drew the determinants by element for implement an excellent semiconductor optical filters. Based on this, we had to be able to implement the semiconductor optical filter that is able to be mounted on the actual ATM system through future studies.

• Smart Structures and Systems
• /
• 제3권3호
• /
• pp.373-384
• /
• 2007

For structural health monitoring (SHM) of civil infrastructures, displacement is a good descriptor of the structural behavior under all the potential disturbances. However, it is not easy to measure displacement of civil infrastructures, since the conventional sensors need a reference point, and inaccessibility to the reference point is sometimes caused by the geographic conditions, such as a highway or river under a bridge, which makes installation of measuring devices time-consuming and costly, if not impossible. To resolve this issue, a visionbased real-time displacement measurement system using digital image processing techniques is developed. The effectiveness of the proposed system was verified by comparing the load carrying capacities of a steel-plate girder bridge obtained from the conventional sensor and the present system. Further, to simultaneously measure multiple points, a synchronized vision-based system is developed using master/slave system with wireless data communication. For the purpose of verification, the measured displacement by a synchronized vision-based system was compared with the data measured by conventional contact-type sensors, linear variable differential transformers (LVDT) from a laboratory test.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.230-236
• /
• 1998

Thermal environment of greenhouse was investigated by thermo-tracer in this study. The Thermo-tracer is a high-sensitivity infrared thermometer of non-contact type. The infrared energy emitted from the measured object is converted into an electrical signal by the detector(HgCdTe) and display as a color or black & white thermal image by way of optical scanning, The experiment was conducted for Venlo-type greenhouse with pad & fan system. The temperature difference between measured by Thermo-trace and measured by HOBO sensor is maximum 0.8$^{\circ}C$. Thermo-trace is possible to use for the thermal environment analysis and diagnosis of a cooling and heating system of greenhouse.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2474-2476
• /
• 2004

지폐 인식 자동화기기가 여러 분야에 보편화되면서 다양한 지폐를 고속으로 처리할 수 있는 고속지폐 인식 자동화 기기가 요구되고 있다. 하지만 대부분의 지폐 인식 자동화 기기가 고속화에 적합하지 않은 구조로 설계되어 있고 신권 추가가 용이하지 않다. 본 논문은 고속 Paper Currency 인식 시스템에 적합한 범용 하드웨어 시스템과 Bayes Rule 기반의 고속 인식 알고리즘을 제안한다. 제안된 범용 하드웨어 구조는 고속의 CIS(Contact Image Sensor)와 DSP(Digital Signal Processor) 그리고 Dual Memory System으로 구성되었다. Bayes Rule에 기초한 고속 인식 알고리즘은 기존의 Paper Currency 인식 시스템에 사용되었던 기계학습 방법에 비해 신권 추가가 쉽고 적은 연산으로 권종을 판별할 수 있어 고속 지폐 인식 자동화기기에 적합하다. 본 논문에서는 제안된 방법들을 실제 자동화기기로 구현하여 그 유용성을 검증한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.89.5-89
• /
• 2001

In this paper we explain about systems developed to forecast the standing up of the dementia patients. Basic idea of our approach is to measure the respiration and body movements in the bed. Based on the data measured, forecasting of standing up action from the bed is possible to some extent. First system proposed uses an image processing technique. Data obtained about the respiration and movements are used to forecast the standing up of the patients. The second system uses ultrasonic sensors, which emits and receives ultrasonic signals. Two techniques f the ultrasonic sensors are considered. One technique is to emit ultrasonic burst signals and to detect the instance when ...

• Journal of the Optical Society of Korea
• /
• 제19권2호
• /
• pp.182-187
• /
• 2015

This paper presents a new graphical method for selecting a pair of optical glasses to simultaneously achromatize and athermalize an imaging lens made of materials in contact. An athermal glass map that plots thermal glass constant versus inverse Abbe number is derived through analysis of optical glasses and plastic materials in visible light. By introducing the equivalent Abbe number and equivalent thermal glass constant, although it is a multi-lens system, we have a simple way to visually identify possible optical materials. Applying this method to design a phone camera lens equipped with quarter inch image sensor having 8-mega pixels, the thermal defocuses over $-20^{\circ}C$ to $+60^{\circ}C$ are reduced to be much less than the depth of focus of the system.

• 대한전자공학회논문지
• /
• 제26권6호
• /
• pp.48-56
• /
• 1989

밀착형 1차원 영상감지소자로서 팩시밀리에 사용될 광도전막을 사일랜듸 글로방전 분해법으로 제작하였다. 우선 rf전력, 사일랜유량, 분위기 가스압, $H_2/SiH_4$비 및 기판온도의 증착조건에 따른 단층광전도막의 전기적 및 광학적특성을 조사하였다. 이 단층구조 영상감지막은 광전감도 0.85와 100lux 조도하에서 $I_{ph}/I_d=100$을 나타내었다. 그러나 이러한 단층박막은 양 전극으로 부터의 캐리어주입으로 인해 큰 암전류도 0.2nA 이하를 나타내었다. 또한 다층막은 단층막에 비해 단파장 가시광영역이 보상되어 팩시밀리용 1차원 영상감지소자에 사용될 만한 결과를 나타내었다.

• 한국음향학회지
• /
• 제37권2호
• /
• pp.99-109
• /
• 2018

현존하는 진동 측정 센서는 정밀도 면에서는 대부분의 진동을 측정하기에 충분하나, 센서 한 개로 하나의 지점이나 방향에 한정하여 측정할 수밖에 없다는 단점을 갖고 있다. 반면 카메라의 경우, 정밀도나 측정 가능한 주파수 영역의 면에서는 다소 불리하지만, 한 번에 광범위한 영역의 진동을 측정할 수 있고 가격 면에서 유리하며 다자유도의 진동을 동시에 측정할 수 있다는 큰 장점을 갖고 있다. 본 연구에서는 저가의 머신 비전 카메라가 진동 측정 센서로서 어느 정도의 오차 범위 내에서 진동을 측정할 수 있는지 알아본 후, 실제 외팔보의 진동을 측정하였다. 카메라의 2차원 평면 이미지는 두 방향의 직선 운동과 한 방향의 회전 운동을 나타낼 수 있다. 먼저 단일 점의 진동을 카메라로 측정하고, LDV(Laser Doppler Vibrometer) 측정을 기준으로 한 카메라 측정의 오차를 실험적으로 교정하였다. 다음으로 다중점의 진동을 한 번에 측정하여 회전 진동과 외팔보 전체 형상의 진동을 측정하였다. 외팔보 전체 형상 진동은 주파수와 시간 영역 모두에 대하여 분석하였다.