• 한국안전학회지
• /
• 제22권6호
• /
• pp.27-34
• /
• 2007

Static or dynamic elastomeric O-ring seals are installed between joining parts, and play key roles of high pressure-tightening. Sealing performance and structural safety of the O-ring are dependent on groove design, plain diameter, squeeze and applications such as pressure and temperature. In this study, to solve O-ring problem squeezed and highly pressurized under laterally one-sided constrained condition, hyperelastic FE analyses are performed, and FE results are compared with measured ones by computer-aided tomography, deformed shape and extrusion depth of the O-ring. Through the comparisons, FE analysis technique was verified. In order to evaluate design sensitivity, Taguchi method was used to select FE analysis cases. Adjustment parameters are clearance gap, groove comer radius, plain diameter and squeeze. By means of verified FE analysis technique, it has been analysed how the parameters have effects on contact stress fields, internal stress fields, and extrusion depths. Sealing performance has been evaluated based on contact stress fields and contact widths, and structural safety on internal stress and strain, extrusion lengths.

• 대한기계학회논문집A
• /
• 제29권7호
• /
• pp.955-963
• /
• 2005

This research investigates dynamic characteristics of a linear motion (LM) guide through a experimental result and theoretical analysis. The stiffness in the LM guide is determined by the preloading due to the minus clearance between the ball bearing and the contact surface and it can be derived by Hertzian contact theory and the nonlinear motion of equation. The vibration analysis is performed using Lagrange equations and its result agrees with the experiment result. Using the sensitivity analysis on design parameters such as the contact angles of ball bearings and the eccentricity of mass center, the variation of the natural frequencies can be predicted.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.445-452
• /
• 1998

The dynamic performance design of catenary-pantograph system which collects current for the next generation Korean high speed train(KHST) was considered. Used was the same dynamic model of the catenary-pantograph system as that of TGV-K which will be introduced for Kyung-bu corridor. Using the model , sensitivity analysis fer design variables were made to improve dynamic performance of KHST system. The results of sensitivity analysis and performance improvement are as follows: (1) It was found that aerodynamic force, tension of contact wire, mass of contact strip, mass of supporting contact strip, mass of clamp, mass of steady arm, and stiffness of plunger were the design variables most influencing the dynamic performance of the system. (2) Pantograph with reductions of 20% aerodynamic force, 34% weight of supporting contact strip, 20% spring constant of plunger, and 34% equivalent mass of steady arm was very possible system for the KHST which will be running at maximum operating speed 350 km/h.

• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1581-1589
• /
• 1995

The feasibility of using AE for detecting contact and slip between a workpiece and an end effector has been tested. Specifically, the relationship between the contact and slip motion and the characteristics of the AE signal is theoretically and experimentally investigated. The experimental results manifest that the high sensitivity of AE signal to the contact and slip makes it a good alternative as a robot tactile sensor.

• 한국융합학회논문지
• /
• 제9권4호
• /
• pp.137-142
• /
• 2018

본 연구는 송 수신 초음파 센서를 이용하여 CNG 탱크에서의 정밀한 연료량을 측정하기 위한 기초 연구로써 탱크내부 압력 및 초음파 센서의 접촉면 변경에 따른 수신감도를 분석하였다. 실험은 탱크와 센서의 접촉면을 점, 선, 면의 3가지 타입으로 변경하고 탱크 내부의 압력을 0 bar 부터 5 bar까지 1 bar 간격으로 충전하면서 측정을 진행하였다. 실험결과 탱크내부의 압력이 증가함에 따라 초음파 센서의 수신신호 값이 감소하는 경향을 확인할 수 있었다. 또한 탱크와 센서의 접촉면적이 증가할수록 수신 신호 값은 증가하지만, 노이즈 또한 증가하는 것을 확인 할 수 있었다. 이와 같은 실험 결과 초음파의 투과 특성을 이용하여 탱크내부의 기체 연료량을 측정할 수 있을 것으로 판단되며, 센서의 접촉면 변경을 통해 정밀성을 향상시킬 수 있을 것으로 판단된다.

• 대한기계학회논문집A
• /
• 제23권11호
• /
• pp.1896-1903
• /
• 1999

The basic requirements to improve the joints quality of tube-to-tubesheet for heat exchangers are to obtain high residual contact pressures between the tubes and the tubesheet as well as low residual stresses in the transition zone of the tubes. The residual contact pressures and residual stresses which govern the joint quality are influenced by parameters such as material properties, geometric dimension of tube and tubesheet and expansion pressures. There are two types of tube layout patterns, triangular and square, which are frequently used for heat exchangers. The purpose of the present work is to examine the superior tube layout patterns considering the joints quality by comparing numerical results from sensitivity analyses which were performed for both of tube layout patterns.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.241-244
• /
• 2006

It is essential to develop a large capacity, non-contact nondestructive inspection system having high reliability to investigate repaired and strengthened structures. Nowadays, an infrared camera is widely used in non-contact nondestructive inspection system. Because an infrared camera is sensitive to the surrounding environment, it is necessary to improve a sensitivity of thermal image information and a relationship between defects and thermal image information. In this papaer, presented is an optimum void detection chart for the optimum conditions to detect infrared rays from inside and outside defects like voids and cracks in concrete structures using extensive computer simulation. Sensitivity studies are performed with respect to variables influencing the temperature distribution such as heating temperature, heating time, and geometries of defect, etc. It may be stated that it could be successfully utilized for the non-contact nondestructive inspection system to detect defects in concrete structures.

• 한국응용과학기술학회지
• /
• 제39권2호
• /
• pp.205-219
• /
• 2022

본 연구는 간호사의 장애인에 대한 인식, 장애인 접촉경험, 인권감수성이 장애인에 대한 태도에 미치는 영향을 파악하기 위한 서술적 조사연구이다. 연구의 대상자는 D광역시 소재 2개 대학병원과 C특별자치시 소재 1개 대학병원에서 근무하는 간호사 181명이었다. 자료는 2021년 9월 2일부터 2021년 10월 6일까지 수집하였다. 수집된 자료는 IBM SPSS 26.0 프로그램을 이용하여 분석하였으며, t-test, ANOVA, Pearson's Correlation Coefficients, Multiple Regression Analysis로 분석하였다. 대상자의 장애인에 대한 태도에 미치는 영향요인은 장애인에 대한 인식(t=-3.96, p<.001), 장애인환자 접촉유무(t=3.23, p=.001), 인권감수성 중 책임지각능력(t=2.13, p=.035), 장애인인식개선교육 이수 여부(t=2.90, p=.004), 장애인건강권법 인지 여부(t=2.44, p=.016)이었으며, 30%의 설명력을 보였다(F=9.36, p<.001). 이에 따라 간호사의 장애인에 대한 인식, 인권감수성, 장애인건강권법을 포함한 장애인에 대한 태도를 함양할 수 있는 교육프로그램 개발이 필요하다.

• 대한수학회지
• /
• 제52권6호
• /
• pp.1195-1207
• /
• 2015

Lagrange multiplier method for solving the contact problem in elasticity is considered. Based on lower semicontinuity of sensitivity functional we prove the convergence of modified dual scheme to corresponding saddle point.

• 대한인간공학회지
• /
• 제18권3호
• /
• pp.1-12
• /
• 1999

This study investigated human operator's perceptual and psychophysical responses to vibrotactile stimulation on various parts of the hand. Using a small vibrotactile display, the effects of three mechanical parameters consisting vibrotactile stimulations, i.e., vibration frequency, pulse-width modulation duty cycle, and number of contactors, on differential thresholds were examined at five different loci of the hand. It was observed that differential threshold varies with vibration frequency and number of active contactors. Differential sensitivity was the greatest at the vibration frequency of 120 Hz. The differential sensitivity was not found to be affected by loci on the hand. The area of stimulation on the hand was also found to be significant in that the sensitivity increased with the number of active contactors. It should be noted that the conclusions from this study generally correspond to those from the previous study on the absolute sensitivity. which means that tactile sensitivity to vibrotactile stimulations can be controlled with a systematic and consistent passion for emulating normal everyday contact on human hands in teleoperation and virtual reality applications.