• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.146-158
• /
• 2002

The purpose of this study was to investigate the effects of Nd:YAG laser on mechanically exposed pulp of dog by the observation of pulpal inflammatory change and heal process including dentinal bridge, structural changes of fibroblasts of thr remaining vital pulp tissue. In experimental group 1, the exposed pulps were irradiated with Nd:YAG laser(3W, 30Hz, 0.2sec) for $2{\sim}3$ second followed by capped with aluminium tin foil. In group 2 and group 3, the exposed pulps were irradiated with Nd:YAG laser via contact(Group 2) and non-contact(Group 3) methods followed by capped with calciumhydroxide paste. The animal were sacrificed at the intervals of 3, 7, 14 and 30days for histologic evaluation. The results were as follows : 1. The dentinal bridges were formwd more fast and broadly in the experimental group 1 and 2 than other groups, but there were no histologic differences in the degree of their formation among control group, experimental group 1. 2. Odontoblastic activities at amputated pulp was increased in the experimental group 2, 3 than other group but there no histologic difference in the odontblastic activitiy among control group, experimental group 1. 3. The infalmmation was severe at the postoperative 1 week of all groups, but its condition subsideed with time elapsed. At the postoperative 3, 7 days, its condition in experimental group 2, 3 were less severe than in the group 1. 4. There were no histologic differences between the experimental group 2 and 3 according to the degree of dentin bridge formation.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.2
• /
• pp.96-101
• /
• 2009

In this study, the effects of three different biological activated carbon (BAC) materials (each coal, coconut and wood based activated carbons), empty bed contact time (EBCT) and water temperature on the removal of sulfonamide 5 species in BAC filters were investigated. Experiments were conducted at three water temperatures (5, 15 and $25^{\circ}C$) and four EBCTs (5, 10, 15 and 20 min). The results indicated that coal based BAC retained more attached bacterial biomass on the surface of the activated carbon than the other BACs, increasing EBCT or increasing water temperature increased the sulfonamide 5 species removal in BAC columns. In the coal-based BAC columns, sulfachloropyridazine (SCP), sulfamethazine (SMT) and sulfathiazole (STZ) removal efficiencies were 30~80% and sulfadimethoxine (SDM), sulfamethoxazole (SMX) removal efficiencies were 18~70% for 5~20 min EBCT at $25^{\circ}C$. The kinetic analysis suggested a first-order reaction model for sulfonamide 5 species removal at various water temperatures (5~$25^{\circ}C$). The pseudo-first-order reaction rate constants and half-lives were also calculated for sulfonamide 5 species removal at 5~$25^{\circ}C$. The reaction rate and half-lives of sulfonamide 5 species ranging from 0.0094~0.0718 $min^{-1}$ and 9.7 to 73.7 min various water temperaturs and EBCTs in this study could be used to assist water utilities in designing and operating BAC filters for sulfonamide antibiotic compounds removal.

• Korean Security Journal
• /
• no.61
• /
• pp.285-305
• /
• 2019

In the bill of [Act on Certified Detective and Certified Detective Business] (hereinafter referred to as the Certified Detective Act) proposed and represented by the member of National Assembly, Lee Wan-Yong in 2017, the legislative point of view showed that various incidents and accidents, including new crimes, are frequently increasing as society develops and becomes more complex, however, it is not possible to solve all the incidents and accidents with the investigation force of the state alone due to manpower and budget, and therefore, a certified detective or private investigator are required. According to the decision of the Constitutional Court in June 2018, Article 40 (4) of the Act on the Use and Protection of Credit Information is concerned with 'finding the location and contact information of a specific person or investigating privacy other than commerce relations such as financial transactions' are prohibited. It is for the purpose of preventing illegal acts in the process of investigation such as the location, contact information, and the privacy of a specific person and protecting the privacy and tranquility of personal privacy from misuse and abuse of the personal information etc. Such 'privacy investigation business' currently operates in the form of self-employment business, which becomes a social issue as some companies illegally collect and provide such privacy information by using illegal cameras or vehicle location trackers and also comes to be the objects of clampdown of the investigative agency. Considering this reality, because it is difficult to find a resolution to materialize the legislative purpose of the Act on the use and protection of credit information other than prohibiting 'investigation business including privacy etc' and it is possible to run a similar type of business as a detective business in the scope that the laws of credit research business, security service business, the position of the Constitutional Court is that 'the ban on the investigations of privacy etc' does not infringe the claimant's freedom to choose a job. In addition to this decision, the precedent positions of the Constitutional Court have been that, in principle, the legislative regulation of a particular occupation was a matter of legislative policy determined by the legislator's political, economic and social considerations, unless otherwise there were any special circumstances, and. the Constitutional Court also widely recognized the legislative formation rights of legislators in the qualifications system related to the freedom of a job. In this regard, this study examines the problems and improvement plans of the certified detective system, focusing on the certified detective bill recently under discussion, and tries to establish a legal basis for the certified detective and certified detective business, in order to cultivate and institutionalize the certified detective business, and to suggest methodologies to seek for the development of the businesses and protect the rights of the people.

• Clean Technology
• /
• v.25 no.3
• /
• pp.245-255
• /
• 2019

Pressurized oxy-fuel combustion is a promising technology for $CO_2$ capture with a benefit of improving power plant efficiency compared with atmospheric oxy-fuel combustion. Prior to $CO_2$ compression in this process, a flue gas condenser (FGC) is used to remove $H_2O$ while recovering the latent heat. At the same time, the FGC has a potential for high-efficiency removal of $SO_x$ and $NO_x$ by exploiting their good solubility in water. In this study, experiments were carried out in a lab-scale, direct contact FGC under different pressures varying between 1 and 20 bar to evaluate the removal efficiency of $SO_2$ and $NO_x$ for individual gases and their mixture. In the tests for individual gases, 20% and 76% of $NO_x$ was removed at 1 bar and 10 bar, respectively. Even higher removal efficiencies were achieved for $SO_2$, and also these were maintained for longer as the pressure increased. In the tests for $SO_2$ and $NO_x$ mixture, the removal efficiency of $NO_x$ increased from 13% at 1 bar to 56% at 20 bar because of higher solubility at elevated pressures. $SO_2$ in the mixture was initially dissolved almost completely and then increased by 1,219 ppm at 1 bar and by 165 ppm at 20 bar. Overall, the removal efficiency of $SO_2$ and $NO_x$ was increased at elevated pressures, but it was lower in the mixture compared with individual gases at identical conditions because of a lower pH and associated chemical reactions in water.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.86-92
• /
• 2022

Recently, the bio-healthcare market is enlarging worldwide due to various reasons such as the COVID-19 pandemic. Among them, biometric measurement and analysis technology are expected to bring about future technological innovation and socio-economic ripple effect. Existing systems require a large-capacity battery to drive signal processing, wireless transmission part, and an operating system in the process. However, due to the limitation of the battery capacity, it causes a spatio-temporal limitation on the use of the device. This limitation can act as a cause for the disconnection of data required for the user's health care monitoring, so it is one of the major obstacles of the health care device. In this study, we report the concept of a standalone healthcare monitoring module, which is based on both triboelectric effects and electromagnetic effects, by converting biomechanical energy into suitable electric energy. The proposed system can be operated independently without an external power source. In particular, the wireless foot pressure measurement monitoring system, which is rationally designed triboelectric sensor (TES), can recognize the user's walking habits through foot pressure measurement. By applying the triboelectric effects to the contact-separation behavior that occurs during walking, an effective foot pressure sensor was made, the performance of the sensor was verified through an electrical output signal according to the pressure, and its dynamic behavior is measured through a signal processing circuit using a capacitor. In addition, the biomechanical energy dissipated during walking is harvested as electrical energy by using the electromagnetic induction effect to be used as a power source for wireless transmission and signal processing. Therefore, the proposed system has a great potential to reduce the inconvenience of charging caused by limited battery capacity and to overcome the problem of data disconnection.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.56-65
• /
• 2022

Copper is one of the non-ferrous metals used in the electrical/electronic manufacturing industries due to its superior properties particularly the high conductivity and less resistivity. The effluent generated from the surface finishing process of these industries contains higher copper content which gets discharged in to water bodies directly or indirectly. This causes severe environmental pollution and also results in loss of an important valuable metal. To overcome this issue, continuous R & D activities are going on across the globe in adsorption area with the purpose of finding an efficient, low cost and ecofriendly adsorbent. In view of the above, present investigation was made to compare the performance of a plant root (Datura root powder) as a bio-adsorbent to that of the synthetic one (Tulsion T-42) for copper adsorption from such effluent. Experiments were carried out in batch studies to optimize parameters such as adsorbent dose, contact time, pH, feed concentration, etc. Results of the batch experiments indicate that 0.2 g of Datura root powder and 0.1 g of Tulsion T-42 showed 95% copper adsorption from an initial feed/solution of 100 ppm Cu at pH 4 in contact time of 15 and 30 min, respectively. Adsorption data for both the adsorbents were fitted well to the Freundlich isotherm. Experimental results were also validated with the kinetic model, which showed that the adsorption of copper followed pseudo-second order rate expression for the both adsorbents. Overall result demonstrates that the bio-adsorbent tested has a potential applicability for metal recovery from the waste solutions/effluents of metal finishing units. In view of the requirements of commercial viability and minimal environmental damage there from, Datura root powder being an effective material for metal uptake, may prove to be a feasible adsorbent for copper recovery after the necessary scale-up studies.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.2
• /
• pp.91-96
• /
• 2012

In this study we investigated the effects of operational parameters of a multi-layered soil filtration (filter depth, filtration velocity, and continuous/intermittent operation) on removal of pollutants in river water. As filter depth increased removal of all the pollutants (COD, TP, TN, and $NH_4$-N) was increased because the increase in filter depth increased in contact time between media and pollutants. The removal of TP and $NH_4$-N more increased with the increase in filter depth, comparing to the biological COD removal which was performed only in the top layer, since the removal mechanism of TP and $NH_4$-N was physicochemical process occurring throughout the whole layers. However, the reduction in filtration velocity resulted in decrease of removal all the pollutants removal due to shorter retention time. Biological COD removal was more influenced with the reduction in filtration velocity (longer retention time), than the removal of TP and $NH_4$-N. Because biological process was occurred only in the top layer which has relatively shorter retention time, comparing with physicochemical process occurred throughout whole media. Therefore, it is desirable that the operation parameters be controlled toward increasing retention time, in order to achieve efficient pollutants removal. The change in operation mode (continuos vs. intermittent operations) did not provide significant effects on the pollutant treatment efficiency by the multi-layered soil filtration system. Our findings suggest that for stable long-term operation it should be considered keeping conditions for biological activity and accelerating clogging.

• Knowledge Management Research
• /
• v.22 no.3
• /
• pp.273-293
• /
• 2021

Due to the COVID-19 pandemic, the size of the e-commerce has been increased rapidly. This pandemic, which made contact-less communication culture in everyday life made the e-commerce market to be opened even to the consumers who would hesitate to purchase and pay by electronic device without any personal contacts and seeing or touching the real products. Consumers who have experienced the easy access and convenience of the online purchase would continue to take those advantages even after the pandemic. During this time of transformation, however, the size of information source for the consumers has become even shrunk into a flat screen and limited to visual only. To provide differentiated and competitive information on products, companies are adopting AR/VR and steaming technologies but the reviews from the honest users need to be recognized as important in that it is regarded as strong as the well refined product information provided by marketing professionals of the company and companies may obtain useful insight for product development, marketing and sales strategies. Then from the consumer's point of view, if the ratings of reviews are widely diverged how consumers would process the review information before purchase? Are non-converged ratings always unreliable and worthless? In this study, we analyzed how consumer's regulatory focus moderate the attitude to process the diverged information. This experiment was designed as a 2x2 factorial study to see how the variance of product review ratings (high vs. low) for cosmetics affects product attitudes by the consumers' regulatory focus (prevention focus vs. improvement focus). As a result of the study, it was found that prevention-focused consumers showed high product attitude when the review variance was low, whereas promotion-focused consumers showed high product attitude when the review variance was high. With such a study, this thesis can explain that even if a product with exactly the same average rating, the converged or diverged review can be interpreted differently by customer's regulatory focus. This paper has a theoretical contribution to elucidate the mechanism of consumer's information process when the information is not converged. In practice, as reviews and sales records of each product are accumulated, as an one of applied knowledge management types with big data, companies may develop and provide even reinforced customer experience by providing personalized and optimized products and review information.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.2
• /
• pp.38-61
• /
• 2019

Up until the early twentieth century in Germany, there were two research trends: 1) emphasizing objectives and making detailed observations of archaeological artifacts and sites, 2) tracing the remains of specific nations or ethnic groups and defining their temporal-spatial boundaries by conducting research on material culture in terms of nationalism or ethnocentrism. After the Second World War ended and Germany was divided, West German archaeology focused on observations of artifacts and sites, cataloging them, and doing research on chronology and distribution following their own traditional methodologies. East German archaeology attempted to prove the developing process of history and its Marxist principles based upon material culture and to examine the historic value of inherent specific cultural heritage based on criteria regarding how it corresponded to socialism and contributed to the development of socialism. Nevertheless, East and West German archaeology shared traditional archaeological methods inherited from German archaeology since the nineteenth century, and contact between archaeologists in West and East Germany continued to a degree. Furthermore, East German archaeology produced significant archaeological achievements acknowledged by West German and European archaeologists. These facts provided the momentum to complete rapid incorporation of the archaeologies of West and East Germany in spite of a one-sided process imposed by West German archaeology. In the case of Korea, it seems necessary to make an effort to share common research history and traditions and to encourage mutual academic exchange (e.g. joint excavation and archaeological research). Furthermore, it is also imperative to have open-minded attitudes toward accepting substantial results and interpretations achieved by North Korean archaeologists under scrutiny when and where necessary, despite seeming to have been fossilized by Marxism and Juche ideology. Any efforts to narrow the gap in archaeological research and conservation of cultural heritage between the archaeologies of South and North Korea should be made immediately. The case of Germany demonstrates how such a project could proceed efficaciously.

• (The) Research of the performance art and culture
• /
• no.25
• /
• pp.57-89
• /
• 2012

The performers preparing for a performance usually experience the process of mental transference, contacting with text (drama) for the first time. It is movement from their everyday life to space in the play, when they try to break the wall between cast and themselves. The transference happens actually at the physical space, such as a dressing room, wing, (place just before appearing at a stage), and a stage (place to contact with audience). Performers keep moving among each psychological and physical space repeatedly, until the performance finishes totally. The transference means moving to each space to another, and the mental borderline means the point of mental change the performers experience during the process of transference. The mental borderline can be guessed to exist through mental aspects the performers feel when they move from each space to another. The most typical example, that shows performer's mental borderline well, is stage fright shown as tension, or anxiety among the variety of aspects. According to a research, the most performers experience that kind of mental aspect just before appearing at a stage. The study on it is already referred by my article.' A Study on Korean Performer's Stage Fright. This study aims at examining the relationship among psychological and physical space the performers experience, mental borderline when transferring and penetrating those spaces, and performer's mental change First, the concept of mental borderline is to be understood totally with preceded research. And the space the performers experience and mental borderline at transference are to be reorganized. Secondly, the area of transference in the process of performance is to be reclassified into physical and mental space. Third, analyzing the actual case of performers experiencing the mental borderline, the diversified use should be searched to make use of mental borderline as a positive element. The psychological symptoms, performers experience in the performance, can have positive consequence beside negative one. The tension occurring at the area of borderline is positive, and it can be the actual borderline for the performers. It will be researched how the performers change at the mental borderline, the state of mind is maintained, and they perform in an overall performance, through the study on the relationship between the transference and the mental borderline. And the stress and concentration caused by stage fright, and shyness will be confirmed, and the positive element of a stage, which is used as various defense mechanism.