• 패션비즈니스
• /
• 제18권5호
• /
• pp.159-170
• /
• 2014

Recent concerns about the PFOA(perfluorooctanoic acid), have been increasing, which is generally applied in the water-repellent finishing process of textile products. It has been proven through animal testing to be harmful to humans, as possible carcinogens and neuro-toxic material. Thus U. S. Environmental Agency has gone as far as requiring the material to be eliminated in its entirety by 2015. As a viable alternative to this water-repellent finishing agent, the development of C6 product is gaining its popularity. The effects of PFOA finishing on the silk fabrics were examined, and we reviewed parameters of the needed process for optimizing appearance and functionality of silk fabrics treated with eco-friendly water-repellent finishing agent. Cross-linking agent affected the most on black color of reactive ink, among the physical properties. The contact angle reading was the highest in $8g/{\ell}$ of concentration for all fabrics. All the fabric specimens, subjected to the DTP and water repellent finishing, exhibited higher stiffness, where rayon specimen showed the highest, compared to the untreated specimens. The results may provide basic information leading to the development of value-added silk fabrics with water-repellency without excessive deterioration of the delicate appearance and inherent soft touch.

• 적정기술학회지
• /
• 제6권2호
• /
• pp.226-237
• /
• 2020

As the number of reported COVID-19 cases rises around the world, regions affected by the virus are taking serious measures to contain its spread. Face shields are one of the highest-need personal protective equipment (PPE) during COVID-19 pandemic. Beyond traditional face masks, as known cases of the coronavirus soar, currently there is a significant shortage of face shields around the world. In response, the protective face shields were designed and fabricated with open-source 3D modelling software and 3D printing technology, respectively. Our face shield consisted of two parts only; a reusable 3D printed headband and a visor made of transparent plastic sheet, as barrier. The resulting 3D printed face shields are affordable, lightweight, one-size-fits-most and ready-to-wear with minimal assemblies, and go on easily over glass, goggle and face mask. To ensure being donated to the healthcare professionals without risk infected by any pathogens, the 3D printed face shields were successfully be disinfected with ultraviolet germicidal irradiation (UVGI dosage of 1000 mJ/cm²) and 70% alcohol. For routine disinfection a UVGI chamber was designed and optimized to provide uniform UV-C illumination with an appreciated fluence for complete decontamination. More than 1,000 face shields were produced already and donated to the special hospitals for COVID-19 patients, quarantines, government and medical agencies in Ethiopia as well as in East-African countries. With certainty, our intention goes beyond the hospitals and other first responders, but not limited for all those who have to stay in the service or be in contact with many other people in the time of COVID-19 pandemic.

• 전자통신동향분석
• /
• 제38권6호
• /
• pp.41-51
• /
• 2023

Heat dissipation technology for semiconductors and electronic packaging has a substantial impact on performance and lifespan, but efficient heat dissipation is currently facing limited improvement. Owing to the high integration density in electronic packaging, heat dissipation components must become thinner and increase their performance. Therefore, heat dissipation materials are being devised considering conductive heat transfer, carbon-based directional thermal conductivity improvements, functional heat dissipation composite materials with added fillers, and liquid-metal thermal interface materials. Additionally, in heat dissipation structure design, 3D printing-based complex heat dissipation fins, packages that expand the heat dissipation area, chip embedded structures that minimize contact thermal resistance, differential scanning calorimetry structures, and through-silicon-via technologies and their replacement technologies are being actively developed. Regarding dry cooling using single-phase and phase-change heat transfer, technologies for improving the vapor chamber performance and structural diversification are being investigated along with the miniaturization of heat pipes and high-performance capillary wicks. Meanwhile, in wet cooling with high heat flux, technologies for designing and manufacturing miniaturized flow paths, heat dissipating materials within flow paths, increasing heat dissipation area, and reducing pressure drops are being developed. We also analyze the development of direct cooling and immersion cooling technologies, which are gradually expanding to achieve near-junction cooling.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.115-116
• /
• 2012

The demand for flexible electronic systems such as wearable computers, E-paper, and flexible displays has increased due to their advantages of excellent portability, conformal contact with curved surfaces, light weight, and human friendly interfaces over present rigid electronic systems. This seminar introduces three recent progresses that can extend the application of high performance flexible inorganic electronics. The first part of this seminar will introduce a RRAM with a one transistor-one memristor (1T-1M) arrays on flexible substrates. Flexible memory is an essential part of electronics for data processing, storage, and radio frequency (RF) communication and thus a key element to realize such flexible electronic systems. Although several emerging memory technologies, including resistive switching memory, have been proposed, the cell-to-cell interference issue has to be overcome for flexible and high performance nonvolatile memory applications. The cell-to-cell interference between neighbouring memory cells occurs due to leakage current paths through adjacent low resistance state cells and induces not only unnecessary power consumption but also a misreading problem, a fatal obstacle in memory operation. To fabricate a fully functional flexible memory and prevent these unwanted effects, we integrated high performance flexible single crystal silicon transistors with an amorphous titanium oxide (a-TiO2) based memristor to control the logic state of memory. The $8{\times}8$ NOR type 1T-1M RRAM demonstrated the first random access memory operation on flexible substrates by controlling each memory unit cell independently. The second part of the seminar will discuss the flexible GaN LED on LCP substrates for implantable biosensor. Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as the future flexible display technology and a type of implantable LED biosensor for a therapy tool. The final part of this seminar will introduce a highly efficient and printable BaTiO3 thin film nanogenerator on plastic substrates. Energy harvesting technologies converting external biomechanical energy sources (such as heart beat, blood flow, muscle stretching and animal movements) into electrical energy is recently a highly demanding issue in the materials science community. Herein, we describe procedure suitable for generating and printing a lead-free microstructured BaTiO3 thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible BaTiO3 thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of BaTiO3 thin film nanogenerator.

• 폴리머
• /
• 제38권6호
• /
• pp.815-819
• /
• 2014

조직공학에서의 인공지지체는 세포의 부착과 증식 및 분화가 잘 되어야 하고, 우수한 생체친화성 및 생분해성을 지녀야 한다. 다양한 인공지지체 제작 방법이 시도되어지고 있으며, 최근들어 3D 프린팅 기술을 이용한 방식이 활발하게 연구되어지고 있다. 폴리카프로락톤(polycaprolactone, PCL)은 낮은 녹는점을 가지고 있어 3D 프린팅하기에 우수한 생체적합 고분자 합성재료이다. 본 연구에서는 3D 프린팅 기술을 이용하여 3차원 PCL 인공지지체를 제작하였고, 지지체의 표면개질을 위해 수산화나트륨(NaOH)을 이용하였다. 표면개질된 인공지지체의 표면특성을 SEM으로 확인한 결과, 수산화나트륨을 처리한 PCL 인공지지체가 처리하지 않은 PCL 인공지지체에 비해 거칠기가 증가함을 보였으며, 접촉각 측정을 통해 친수성이 증가함을 확인하였다. In vitro 실험결과, 수산화나트륨을 처리한 PCL 인공지지체가 처리하지 않은 PCL 인공지지체에 비해 세포의 증식과 분화가 증가함을 보였고, 세포의 부착 모습은 균일하고 밀집된 형태로 부착됨을 확인하였다. 따라서 조형가공기술을 이용하여 수산화나트륨을 처리한 표면개질된 PCL 인공지지체를 제작하고 분석함으로써, 세포적합성을 통해 체내 인공지지체 개발 적용 가능성을 제시하였다.

• 한국진공학회지
• /
• 제19권2호
• /
• pp.81-90
• /
• 2010

층과 층 사이의 정전기적인력, 수소결합 또는 공유결합을 이용하여 층당 두께를 수 옹스트롱에서부터 수십 나노미터까지 제조할 수 있으며 박막의 표면 형태를 흡착시키고자 하는 물질 및 박막 후처리 공정을 통해 제어할 수 있으며 더 나아가, 삽입하는 물질의 특성에 따라 박막의 기능성을 집적화 및 다양화시킬 수 있다. 본 연구에서는 이러한 층상자기조립방법의 특성을 이용하여 반사방지막, 초소수성 필름 및 전기화학센서로의 응용가능성을 제시하였다. 반사방지막의 경우, 구형의 블록공중합체를 유리기판 위에 다층박막으로 적층시킴으로써 박막 굴절률을 1.25까지 감소시켰고 이를 통해 약 99.5%의 빛 투과도를 달성할 수 있었다. 더 나아가 바이오물질인 엔자임을 다층박막에 삽입시킬 경우, 활성 산소를 분해시키는 전기화학센서로의 제조가 가능함을 보인다. 본 연구는 본인이 이미 발표한 논문(J. Am. Chem. Soc. 128, 9935 (2006); Adv. Mater. 19, 4364 (2007); Electro. Mater. Lett. 3, 163 (2007))들을 정리하여 층상자기조립법에 관해 소개하는 논문이다.

• Journal of Periodontal and Implant Science
• /
• 제52권4호
• /
• pp.338-350
• /
• 2022

Purpose: Various studies have investigated 3-dimensional (3D)-printed implants using Ti6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses. Methods: Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses. Results: All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants. Conclusions: Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.

• The Journal of Advanced Prosthodontics
• /
• 제16권2호
• /
• pp.126-138
• /
• 2024

PURPOSE. The aim of this study was to evaluate the influence of different 3D dental resins, using a manufacturer recommended printer and a third-party printer, on cellular responses of human gingival cells. MATERIALS AND METHODS. Three NextDent resins (Denture 3D+, C&B MFH and Crowntec) were used to produce specimens on printers NextDent 5100 (groups ND, NC and NT, respectively) and Phrozen Sonic Mini 4K (groups PD, PC and PT, respectively). Human gingival fibroblasts were cultured and biocompatibility was evaluated on days 1, 3 and 7. IL-6 and IL-8 concentrations were evaluated at 3 days using ELISA. Surface roughness was evaluated by a contact profilometer. SEM and fluorescence micrographs were analyzed at days 1 and 7. Statistical analyses were performed using SPSS and mean differences were tested using ANOVA and post-hoc Tukey tests (P < .05). RESULTS. There was an increase in cellular viability after 7 days in groups PC and PT, when compared to group PD. ND group resulted in higher concentration of IL-6 when compared to PT group. SEM and fluorescence micrographs showed less adhesion and thinner morphology of fibroblasts from group PD. No significant differences were found regarding surface roughness. CONCLUSION. The use of different printers or resins did not seem to influence surface roughness. NextDent 5100 and Phrozen Sonic Mini 4K produced resins with similar cellular responses in human gingival fibroblasts. However, Denture 3D+ resin resulted in significantly lower biocompatibility, when compared to C&B MFH and Crowntec resins. Further testing is required to support its long-term use, required for complete dentures.

• 한국방사선학회논문지
• /
• 제15권7호
• /
• pp.965-973
• /
• 2021

방사선 치료는 고에너지 X선을 최소 20 Gy에서 80 Gy까지 다양하게 조사되기 때문에 종양이 위치하는 국소부위에 고선량을 투여하며 일부 정상조직의 여러 부작용이 예상 된다. 현재 임상에서는 정상조직의 차폐를 위한 노력으로 대표적인 재료인 납을 사용하고 있지만 납은 인체에 유해한 중금속으로 분류되고 있으며 다량의 피부접촉은 중독을 유발할 수 있다. 따라서 본 연구는 FDM(Fused Deposition Modeling)방식의 3차원 프린터의 재료 Tungsten, Brass, Copper을 이용하여 납의 한계점을 보완 할 수 있는 측정시트를 제작하고 투과성능을 알아보고자 한다. 3D 프린터를 이용해 Tungsten 혼합 필라멘트 투과측정 시트 크기는 70 × 70 mm, 두께는 1, 2, 4 mm로 제작하였으며 제작한 측정시트의 투과성능을 확인하기 위해 선형가속기 (TrueBeam STx, S/N: 1187)에서 발생된 6, 15 MV을 Water Phantom과 Ion chamber (FC-65G), elcetrometer (PTW UNIDOSE)을 사용하여 SSD 100 cm, 물 속 5 cm에서 100 MU를 조사하여 측정하고 투과성능을 평가하였다. 각 소재의 측정시트를 1 mm씩 증가시킨 결과 6 MV에서는 Tungsten 시트의 경우 3.8~3.9 cm일때의 시트는 기존 납의 차폐체 두께 6.5 cm 보다 얇으며, 15 MV에서는 Tungsten 시트의 경우 4.5~4.6 cm일 때 시트는 기존 납의 차폐체 두께 7 cm 보다 얇으며 동등한 성능을 확인할 수 있었다. 본 연구를 통하여 Tungsten 합금 필라멘트을 이용하여 제작한 투과측정 시트는 고에너지 영역에서의 투과 차폐 가능성을 확인하였으며. 대체품으로써의 사용가능성 또한 우수함을 확인하였다, 향후 3D 프린팅 기술로 차폐제 제작을 위한 기초자료로 제공할 수 있을 것으로 사료 된다.