• 전력전자학회논문지
• /
• 제23권5호
• /
• pp.299-304
• /
• 2018

An ideal circuit breaker should supply electric power to loads without losses in a conduction state and completely isolate the load from the power source by providing insulation strength in a break state. Fault current is relatively easy to break in an Alternating Current (AC) circuit breaker because the AC current becomes zero at every half cycle. However, fault current in DC circuit breaker (DCCB) should be reduced by generating a high arc voltage at the breaker contact point. Large fire may occur if the DCCB does not take sufficient arc voltage and allows the continuous flow of the arc fault current with high temperature. A semiconductor circuit breaker with a power electronic device has many advantages. These advantages include quick breaking time, lack of arc generation, and lower noise than mechanical circuit breakers. However, a large load capacity cannot be applied because of large conduction loss. An extinguishing technology of DCCB with polymeric positive temperature coefficient (PPTC) device is proposed and evaluated through experiments in this study to take advantage of low conduction loss of mechanical circuit breaker and arcless breaking characteristic of semiconductor devices.

• 대한안전경영과학회지
• /
• 제16권2호
• /
• pp.81-90
• /
• 2014

Flexible production system has been expanded to all sectors of economy with the change of labor market and diversification of employment. The unstable employment with irregular work has replaced stable employment with regular work. This study has investigate the impact pathway of the type of employment on health status especially ill-health symptoms experiences. Among the first Korean Working Conditions Survey data, the employee's response data was used to analyze the path way with multiple regression analysis. The result has shown the direct effect of the type of employment on ill-health symptoms experience. Indirect effect of the type of employment was found the pathway via the exposure to noise, high temperature, low temperature, dust, skin contact to chemicals, painful posture, heavy material handling, standing position, repetitive movement of hands. However the exposure to the other hazardous factors such as organic solvent, wholebody vibration, radiation, lifting people, infectious materials were not influenced by the type of employment.

• 전산구조공학
• /
• 제10권2호
• /
• pp.161-169
• /
• 1997

차량의 동적특성, 즉 소음, 진동, 승차감 및 조종안정성능 등에 중요한 영향을 미치는 부품중에 하나로 차체의 중량을 지지하고 노면과 접촉하여 회전하면서 조타성을 지니는 타이어를 고려하지 않을 수 없다. 지금까지의 이러한 타이어 최적설계에 이용되어지고 있는 예측기법으로는 유한요소해석 방법이 널리 활용되어 지고 있으나, 이는 타이어에 공기압 주입 및 차량의 조종안정성능이 우수한 타이어 제품개발 및 개선을 위해 차량 주행시 타이어와 노면과의 접지면에 작용하는 힘과 모멘트를 예측할 수 있는 유한요소해석 적용기법을 개발하였으며,이러한 해석기법을 통한 결과와 실측치는 매우 유사한 관계를 지니고 있음을 알 수 있었다.

• 한국정보처리학회논문지
• /
• 제6권5호
• /
• pp.1312-1322
• /
• 1999

The world of linearity, which is regular, predictable and irrelevant to time sequence in most natural phenomenon, is a very small part. In fact, signals generated from natural phenomenon with which we're in contact are showed only slight linearity. Therefore it is very difficult to understand and analyze natural phenomenon with only predictable and regular linear systems. Due to these reasons researches concerning non-linear signals that of analysis were excluded being regarded as noise are being actively carried out. Countless signals generated from nonlinear system have the information about itself, and analyzing those signals and get information from it, that will be able to be used effectively in so may fields. Hence, in this paper we used a higher order spectrum, especially the bispectrum. After we prove the validity applying bispectrum to logistic map, which is typical chaotic signal. Subsequently by showing the result applying for actual signal analysis of EEG according to auditory stimuli, we show that higher order spectra is a very useful parameter in analysis of non-linear signals and the result of EEG analysis according to auditory stimuli.

• 한국주조공학회지
• /
• 제20권2호
• /
• pp.97-103
• /
• 2000

In this study, a design of experiment, Taguchi method, was applied to optimize gating system design of escalator step die casting parts. Six shape factors which affect filling sequence of melt are adopted and divided into two levels respectively. Initial feeding differences of melt which were calculated by using S/N(signal-to-noise) ratio in each condition were demonstrated with the simulation of Flow-3D software program. Variations of S/N ratio according to shape factors were obtained and the optimal condition of gating system could also be obtained. It could be found that width of gate, contact angle of gate, thickness of runner are more effective factors on the filling sequence of melt than the others in this case of escalator step die casting parts. It showed that the economical gating system and sound filling sequence of melt were obtained by using Taguchi method.

• 한국정밀공학회지
• /
• 제17권11호
• /
• pp.199-205
• /
• 2000

The vibration and noise of gears is due to the vibration exciting force caused by the tooth stiffness which changes periodically as the mesh of teeth proceeds and by the transmission error, that is, the rotation delay between driving gear and driven gear caused by manufacturing error and alignment error in assembly and so on. The purpose of this study is to develop how to calculate simultaneously the optimum amounts of tooth profile modification, end relief and crowning by minimizing the vibration exciting force of helical gears. We estimate the vibration exciting force by the mesh analysis of gears. The constraints of this problem consist of contact ratio and strengths of gear teeth such as tooth fillet stress, surface durability and scoring. ADS(Automated Design Synthesis) is used as an optimization tool. And, since the aspect ratio is an important parameter of tooth modification, we investigate the relation between it and the optimum values of tooth modification. The proposed method can calculate the optimum amount of tooth modification automatically and is to be utilized to resolve the problem of vibration of helical gears.

• 한국전자통신학회논문지
• /
• 제16권2호
• /
• pp.355-362
• /
• 2021

동축 마그네틱 기어는 비접촉 동력전달을 사용하기 때문에 기존 기계식 기어의 동력전달과정에서 발생하는 마찰, 마모, 소음, 발열을 최소화할 수 있다. 현재 다양한 산업에 적용하기 위한 연구가 활발히 진행되고 있으나 동축 마그네틱 기어가 갖는 특징 중, 높은 기어비에서 토크밀도가 급격히 감소하는 문제가 거론되었다. 본 논문은 높은 토크밀도를 갖는 저 기어비 동축 마그네틱 기어를 이용하여, 이들을 다중으로 결합하는 방향을 제시하였다. 해당 방법의 유효성을 확인하기 위해 단일형태의 고 기어비 모델과 토크밀도를 비교하고 다중 동축 마그네틱 기어의 기어비 조합을 분석함으로써 가장 우수한 조합을 선정하는 설계 방향을 나타내었다.

• 한국인터넷방송통신학회논문지
• /
• 제24권2호
• /
• pp.29-34
• /
• 2024

코로나19 이후, 원격 비접촉 활동의 증가로 인해 온라인 플랫폼을 활용한 스포츠 활동이 급증하였다. 당구도 온라인 플랫폼에 적합한 경기로 주목 받으면서 공의 위치와 이동 궤적 검출 등에 관한 다양한 연구가 진행되어 왔다. 본 논문에서는 머신 비전 기술을 활용하여 당구공의 위치를 정확하게 검출하는 방법을 제안한다. 제안한 방법은 Canny 방식의 객체 외곽선 검출 후 공의 프로파일을 갖는 템플릿과의 상관만으로 공의 위치를 검출한다. 상관을 통한 당구공검출은 높은 시스템 성능을 보이는 동시에 구현 복잡도가 낮고 외란에 강인하기 때문에 실제 시스템에 적용이 용이한 장점이 있다.

• 감성과학
• /
• 제19권3호
• /
• pp.81-88
• /
• 2016

본 논문은 깊이 카메라(Creative Senz3D)를 이용하여 호흡률을 측정하는 것에 대한 정확도와 영향을 미치는 요인들을 분석하였다. 영향 요인 분석에서는 깊이 카메라가 가지는 깊이 값에 대한 오차와 노이즈 그리고 주위 조도의 영향에 대하여 실험 연구를 진행하였다. 그 결과 깊이 카메라와 측정 대상의 거리가 증가함에 따라 깊이 값의 오차가 증가하였고 깊이 영상의 오른쪽은 실제 거리보다 깊이 값이 크게 측정되고 왼쪽은 실제 거리보다 깊이 값이 작게 측정되었다. 이에 따라 깊이 값이 영상의 영역에 따라 비대칭성을 가지고 있음을 알 수 있었다. 깊이 카메라와 측정 대상의 각도가 틀어짐에 따라서도 깊이 값의 차의 오차가 증가하였으며 깊이 카메라의 노이즈는 측정 거리가 멀어짐에 따라 점점 증가하였고 노이즈를 측정하는 윈도우의 크기가 증가함에 따라 감소하였다. 주위 조도는 깊이 값에 영향을 주지 않았다. 또한 실제 상황에서 사람을 대상으로 20회 호흡을 하게 하여 깊이 카메라를 이용해 호흡률을 측정하였고 호흡률이 제대로 측정됨을 확인하였다.

• 대한소아치과학회지
• /
• 제24권4호
• /
• pp.763-770
• /
• 1997

The air abrasive technique is a non-mechanical method by which teeth are treated before restoration and stains and calculi are removed from tooth surfaces using the kinetic energy of small particles. The air abrasive technique in dentistry was first introduced in the 1950's with as instrument called 'Airdent'. But, as the main restorative materials of the period were amalgam and gold, and the instrument's inability to control the flow of particles caused the particles to be spread throughout the clinics, widespread use was not possible. In the 1990's, as these techincal problems were solved and more interest in new restorative materials rose in an effort to preserve sound tooth structure, new developements took place in instruments related to the air abrasive technique. The air abrasive technique produces less pressure, vibration and heat that might cause patient discomfort and facilitates the preservation of sound tooth structure. It also reduces the need for anesthesia and is less harmful to the pulp. Other advantages include increase in dentin bonding strength of composite resin, lower possibility of saliva contamination and maintenance of a dry field. But there is not direct contact between the nozzle and the tooth, the operator cannot use his or her tactile sense and must rely solely upon visual input. Other disadvantages are: the tooth preparation depends on the operator's ability; alpha-alumina particles, after bouncing off the tooth surface, cause damage to dental mirrors; the equipment is expensive and takes up a certain amount of space in the clinic. The author conducted case report using the air abrasive technique on patient visiting the Department of Pediatric Dentistry at Seoul National University Dental Hospital and arrived at the following conclusions. 1. The tooth preparation capability of different air abrasive devices varied widely among manufacturers. 2. It was more effective in treating early caries lesions and stains compared to lesions where caries had already progressed to produce soft dentin. 3. The cold stream and noise caused by the evacuation system was a major cause of discomfort to pediatric patients. 4. As there is no direct contact with tooth surface when using the air abrasive technique for tooth preparation, considerable experience and skill is required for proper tooth preparation.