• Journal of Korea Entertainment Industry Association
• /
• v.15 no.4
• /
• pp.1-13
• /
• 2021

In this study, we tried to present suggestions to the Gyeongsangbuk-do tourism officials to satisfy them with experiential tourism resources and to revitalize their participation in the program. Therefore, the implications of this study are as follows. First, research on the satisfaction of experiential tourism programs and the willingness to participate in them is carried out, suggesting that it is a prerequisite for the transformation of the perception of tourists' participation in the Corona era. Second, it is necessary to make it a small experience tourist space that can provide non-face-to-face service utilizing the characteristics of contact technology, and to provide tourists with unique attractions against product discrimination and customer service. Third, through the introduction of non-face-to-face experience programs and expansion of services, the limited and macroscopic environment and social phenomenon of tourism activities in the Corona era, a new perception can be instilled. Fourth, visitors can expect to revitalize the tourism industry through the development and discovery of various programs. Thirdly, it will be possible to revitalize the local economy by giving meaning to the satisfaction of experiential tourism programs to tourists from all over the region's tourism business.

• 한국노년학
• /
• v.40 no.1
• /
• pp.91-109
• /
• 2020

This study aims to investigate the interdependence of Korean middle and old-aged couples in the association between exercise and life satisfaction through grip strength trajectory. Data were drawn from the nationally representative Korea Longitudinal Study of Aging (KLoSA) collected from 2006 to 2016. The sample included couples over 45 years of age in the first wave and participated in all six waves of the survey (Ncouple=1,997). There were three steps for analyses: correlation, parallel latent growth curve model, tests of indirect effects of the mediation paths. Covariates included in the models were husbands and wives' characteristics (age, education, work status, chronic diseases, marital satisfaction, contact frequency with friends or neighbors) and couple's household income. Results showed husbands' and wives' life satisfaction and grip strength were interdependent upon each other. Also, exercise participation of both husbands and wives was associated with both husbands' and wives' life satisfaction via the initial level of grip strength of husbands. Moreover, exercise participation of only husbands was associated with wives' life satisfaction through the initial grip strength of husbands. These results suggest the aging processes of middle and old-aged couples need to be understood in the context of gender dynamics and couple interdependence.

• Journal of Conservation Science
• /
• v.38 no.2
• /
• pp.124-132
• /
• 2022

Through scientific analysis, this study identified the material characteristics of metal foil decorating the border line and knotting of the National Folklore Cultural Heritage 'Pouch for the Sutra Embroidered with a Sun and Moon Design'. Through Scanning Electron Microscope-Energy Dispersive Spectroscopy results, it was estimated that silver (Ag) and sulfur (S) were present in the metal foil, and silver leaf was also attached to the medium. S may discolor Ag from yellow to black depending on its concsentration and contact time. Yellow color could not be identified in metal foil at present. But there existed an example of the preparation of a gold-colored flat silver thread; therefore, further research is needed to estimate the original color. The lamella was reddish brown on the back. Aluminum, silicon, and iron were also detected and were the main components found in red soil. This is believed to be the red adhesive in traditional flat gold thread and is considered to be an adhesive-related component of the metal foil. From the gas chromatography mass spectrometry results, the adhesive component was confirmed to be animal glue.

• Journal of the Korean Society of Safety
• /
• v.37 no.4
• /
• pp.120-128
• /
• 2022

Printed circuit boards (PCBs) are a basic component in the electronics industry and are widely used in nearly all electronic products, such as mobile phones, tablet computers, and digital cameras, as well as in electric equipment. PCB manufacturing involves the use of many chemicals and chemical processes and therefore has more risks than other manufacturing sectors. This study aims to identify the causes of possible accidents during PCB manufacturing through risk assessment, develop and implement safety measures, and evaluate the effectiveness of these measures. Note that the safety measures developed to mitigate the risks of a certain process were also implemented for other similar processes. The risk assessments conducted over seven years, from 2015 to 2021, at a PCB manufacturing company identified 361 hazardous processes. Between 2016 and 2019, 41-56 hazardous processes were identified per year; such processes decreased to fewer than 20 per year after 2020. Application of the risk assessment results to the improvement of the hazardous processes with the similar characteristics seems to be effective in decreasing the risks. Equipment-related factors such as lack of appropriate maintenance, low work standards, and defective protection devices were responsible for 59.8% of all possible accidents. Because PCB manufacturing involves many chemicals, skin contact with hazardous substances, electric shock, fire, and explosion were the most common types of possible accidents (81.7%). In total, 505 safety measures were implemented, including 157 related to purchase and improvement of equipment and devices for safety (31.1%), 147 related to the installation/modification of fire prevention facilities (29.1%), and 69 related to the use of standard electrical appliances (13.7%). Risk assessment conducted after implementing the safety measures showed that these measures significantly decreased risk; 247 processes (68.4%) had a risk level of 3, corresponding to "very low," and 114 processes (31.6%) showed a risk level of 4, corresponding to "low." In particular, risk assessment of 104 processes with risk scores of 12 and 10 other processes with risk score of 16 showed that the risk decreased to 4 after implementing the safety measures. Thus, implementing these measures in similar manufacturing sectors that involve chemical processes can mitigate risk.

• Journal of Korean Society of Disaster and Security
• /
• v.15 no.2
• /
• pp.37-44
• /
• 2022

As the frequency of torrential rains and typhoons increases due to climate change, the frequency of occurrence of debris flow is also increasing. In particular, in the case of Kangwon-do, the occurrence of damage caused by mountain disasters is increasing as it has a topographical characteristic where the mountains and the coast are in contact. In order to analyze the flow characteristics in the sedimentary part of the debris flow, input data were constructed through numerical maps and field data, and a two-dimensional model, FLO-2D, was simulated. The damaged area was divided into the inflow part of the debris flow, the village center, and the vicinity of the port, and the flow center and flow velocity of the debris flow were simulated and compared with field survey data. As a result, the maximum flow depth was found to be 2.4 m at the debris flow inlet, 2.7 m at the center of the village, and 1.4 m at the port adjacent to the port so the results were similar when compared to the field survey. And in the case of the maximum flow velocity, it was calculated as 3.6 m/s at the debris flow inlet, 4.9 m/s in the center of the village and 1.2 m/s in the vicinity of the port, so It was confirmed that the maximum flow center occurred in the section where the maximum flow rate appeared.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.6
• /
• pp.603-609
• /
• 2022

Passivation quality is mainly governed by epitaxial growth of crystalline silicon wafer surface. Void-rich intrinsic a-Si:H interfacial layer could offer higher resistivity of the c-Si surface and hence a better device efficiency as well. To reduce the resistivity of the contact area, a modification of void-rich intrinsic layer of a-Si:H towards more ordered state with a higher density is adopted by adapting its thickness and reducing its series resistance significantly, but it slightly decreases passivation quality. Higher resistance is not dominated by asymmetric effects like different band offsets for electrons or holes. In this study, multilayer of intrinsic a-Si:H layers were used. The first one with a void-rich was a-Si:H(I₁) and the next one a-SiO_x:H(I₂) were used, where a-SiO_x:H(I₂) had relatively larger band gap of ~2.07 eV than that of a-Si:H (I₁). Using a-SiO_x:H as I₂ layer was expected to increase transparency, which could lead to an easy carrier transport. Also, higher implied voltage than the conventional structure was expected. This means that the a-SiO_x:H could be a promising material for a high-quality passivation of c-Si. In addition, the i-a-SiO_x:H microstructure can help the carrier transportation through tunneling and thermal emission.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.4
• /
• pp.271-281
• /
• 2019

The purpose of this study is to provide basic data for improving the adaptability of college life by examining the effects of individuality and relationship of university freshmen on college life adaptation. The study subjects were 383 freshmen enrolled in a university in Chungbuk C City, and a multiple regression analysis was conducted to examine the factors of impact. The first study found that boys were more individual in genders, depending on the general characteristics. Extroverted students were more relational. In the majors, students in the humanities and social sciences were more related, and students in the natural engineering department were more individual. Second, the lower factors affecting college students' adaptation to college life were found to be autonomous in individuality, and affinity and intimacy in relation. In particular, autonomy has the greatest impact on adaptation to college life, followed by affinity and intimacy. Based on these results, policy suggestions are needed first, it is necessary to balance and balance individuality and relationship. second, it is necessary to create activities and learning environments that you can choose for yourself. third, it is necessary to develop programs to promote affinity and intimacy such as department events and club activities. fourth, emotional and psychological program support through face-to-face contact should be activated to improve individuality and relationship.

• Clean Technology
• /
• v.16 no.4
• /
• pp.277-283
• /
• 2010

Eosin Y is used a colorant and dye but eosin Y is harmful toxic substance. In this study, the adsorption characteristics of granular activated carbon have been investigated for the adsorption of eosin dye dissolved in water. The effects of initial dye concentration, contact time, pH and temperature on adsorption of eosin by a fixed amount of activated carbon have been studied in batch adsorber and fixed bed. The adsorptivity of activated carbon for eosin Y were largely improved by pH control. When the pH was 3 in the sample, the eosin Y could be removed 99% of initial concentration (10 mg/L). The adsorption equilibrium data are successfully fitted to the Freundlich isotherm equation in the temperature range from 293 to 333 K. The estimated values of k and ${\beta}$ are 19.56-134.62, 0.442-0.678, respectively. The effects of the operation conditions of the fixed bed on the breakthrough curve were investigated. When the inlet eosin Y concentration is increased from 10 to 30 mg/L, the corresponding adsorption breaktime appears to decrease from 470 to 268 min at bed height of 3 cm and a constant flow rate of 2 g/min. When the initial eosin Y flow rate is increased from 1 to 3 g/min, the corresponding adsorption breaktime appears to decrease from 272 to 140 min at bed height of 3 cm and inlet concentration of 10 mg/L. Also, breaktime increased with increasing bed height at flow rate of 2 g/min and inlet concentration of 10 mg/L. And length of adsorption zone showed similar patterns.

• Journal of Industrial Convergence
• /
• v.20 no.12
• /
• pp.107-115
• /
• 2022

The study attempted to identify the factors affecting the image of nurses in health and non-health university students after COVID-19. The study was collected from November 15, 2021 to 2011 and 28th, 2021, from 133 health-related and 123 non-health-related students in four universities. This data was analyzed by descriptive statistics, correlation, and multiple regression analysis using the SPSS 22.0 program. As a result of the study, whether the nurse image according to general characteristics is in the first grade of health-related college students(t=2.82, p=.006) showed a statistically significant difference. The nurse image of college students showed a positive correlation with the mass media image and major satisfaction in both health and non-health fields. For health-related college students, the image of mass media, major satisfaction, and first grade influence the image of nurses (F=40.42, p<.001)In the case of university students in non-health departments, it was found that only the media image affects the nurse image. (F=20.13, p<.001). In order to improve the image of nurses, it is necessary to have continuous interest in contact with the media through new media and to approach it systematically.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.583-596
• /
• 2022

The rock surface of Bangudae petroglyphs is mainly dark brown hornfelsified shales by contact metamorphism. The surface form a weathered layer of a invariable depth, and there is a difference with mineral and chemical composition between weathered and non-weathered layers. Surface of the petroglyphs has been discolored to light brown over the face due to biological and chemical weathering. As the measuring chromaticity based on the non-weathered layer, the whiteness and yellowness increased in the weathered layer, and the color difference (ΔE) was 5.54 to 36.89 (mean 17.26). In the weathered layer of the petroglyph surface, the CaO content was reduced by about 90% compared to the non-weathered layer, and Sr also showed the same trend. In particular, the mean porosity of the non-weathered layer was 0.4%, but it was estimated as 25.0% in the weathered layer. This is interpreted as the fact that calcite reacts with water, and forms a weathered layer from the surface as it is eluted. Based on the weathering depth modeling of the petroglyphs using the penetration characteristics of X-rays, the weathering depth of rock faces was found to be 1 to 2mm. However, the area classified as 2mm or more estimated to be a maximum of 3 to 4mm, considering the weathering depth around the petroglyphs surface.