• Korean Journal of Materials Research
• /
• v.19 no.1
• /
• pp.28-32
• /
• 2009

Silicon carbide (SiC) is a promising material for power device applications due to its wide band gap (3.26 eV for 4H-SiC), high critical electric field and excellent thermal conductivity. The Schottky barrier diode is the representative high-power device that is currently available commercially. A field plate edge-terminated 4H-SiC was fabricated using a lift-off process for opening the Schottky contacts. In this case, Ni/Ti dual-metal contacts were unintentionally formed at the edge of the Schottky contacts and resulted in the degradation of the electrical properties of the diodes. The breakdown voltage and Schottky barrier height (SBH, ${\Phi}_B$) was 107 V and 0.67 eV, respectively. To form homogeneous single-metal Ni/4H-SiC Schottky contacts, a deposition and etching method was employed, and the electrical properties of the diodes were improved. The modified SBDs showed enhanced electrical properties, as witnessed by a breakdown voltage of 635 V, a Schottky barrier height of ${\Phi}_B$=1.48 eV, an ideality factor of n=1.04 (close to one), a forward voltage drop of $V_F$=1.6 V, a specific on resistance of $R_{on}=2.1m{\Omega}-cm^2$ and a power loss of $P_L=79.6Wcm^{-2}$.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.155-164
• /
• 2014

Carbon-fiber-reinforced plastic (CFRP) composites are increasingly being used in a variety of industry applications, such as aircraft, automobiles, and ships because of their high specific stiffness and high specific strength. Aircraft are exposed to high temperatures and high humidity for a long duration during flights. CFRP materials of the aircraft can absorb water, which could decrease the adhesion strength of these materials and cause their volumes to change with variation in internal stress. Therefore, it is necessary to estimate the characteristics of CFRP composites under actual conditions from the viewpoint of aircraft safety. In this study air-coupled ultrasonic testing (ACUT) was applied to the evaluation of water absorption properties of CFRP composites. CFRP specimens were fabricated and immersed in distilled water at $75^{\circ}C$ for 30, 60, and 120 days, after which their ultrasonic images were obtained by ACUT. The water absorption properties were determined by quantitatively analyzing the changes in ultrasonic signals. Further, shear strength was applied to the specimens to verify the changes in their mechanical properties for water absorption.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.165-170
• /
• 2014

Shear horizontal (SH) waves propagate as a type of plate wave in a thin sheet. The dispersion characteristics of SH waves can be used for signal analysis. Therefore, SH-waves are useful for monitoring the structural health of a thin-sheet-structure. An electromagnetic acoustic transducer (EMAT), which is a non-contact ultrasonic transducer, can generate SH-waves easily by varying the shape and array of magnets and coils. Therefore, an EMAT can be applied to an automated ultrasonic testing system for structural health monitoring. When used as a sensor, however, the EMAT has a weakness in that electromagnetic interference (EMI) noise can occur easily in the automated system because of motors and electric devices. Alternatively, a fiber optic sensor works well in the same environment with EMI noise because it uses a light signal instead of an electric signal. In this paper, a fiber Fabry-P$\acute{e}$rot interferometer (FFPI) was proposed as a sensor to receive the SH-waves generated by an EMAT. A simple test was performed to verify the performance of the FFPI sensor. It is thus shown that the FFPI can receive SH-wave signals clearly.

• Applied Chemistry for Engineering
• /
• v.23 no.6
• /
• pp.521-528
• /
• 2012

In this study, we analyzed the physical properties of an ethylene oxide adducted amphoteric surfactant such as critical micelle concentration, surface tension, interfacial tension, contact angle, viscosity and phase behavior. The dual function characteristics of an amphoteric surfactant were investigated by determining an isoelectric point, which were attained using zeta potential measurements and quartz crystal microbalance (QCM) experiments. The isoelectric points of DE3-OSA82-AO, DE5-OSA82-AO and DE9-OSA82-AO surfactant systems determined by zeta potential measurements were 6.97, 6.93 and 7.10 respectively and they are in good agreement with the isoelectric point values measured by QCM experiments. The frictional property measured using an automated mildness tester showed that the DE-OSA82-AO surfactant could provide a good softening effect at neutral condition.

• Journal of Distribution Science
• /
• v.14 no.4
• /
• pp.81-92
• /
• 2016

Purpose - In recent years, management scholars have expressed growing interest in the concept of person-Job fit because of having many benefits for employees' attitudes and behaviors. The related research is needed to determine what specific types of fit are related to each other, and to get important individual outcomes. Person-job fit of employees in service organization plays an important role in company as well as person in service industry. Person-job fit, representing the consistency between person (service provider) and job (service provided to the customers), gives significant and positive effects on the attitude and behavior of service provider. On the basis of the study background, the purpose of this study is as follows. First, we would like to examine the effects of person-job fit of service provider on their emotional intelligence. Emotional intelligence is divided into four sub-factors such as self-understanding, understanding others, emotional utilization, and emotional regulation. Second, we would like to identify the relationships between job satisfaction and sub-factors such as self-understanding, understanding others, emotional utilization, and emotional regulation. Research design, data, and methodology - We performed structural equation model using Spss 18.0 and Amos 20.0 in order to verify the hypotheses. Subjects were golf service assistants who were high-touching service with high degree in interaction and long contact time with customers. 178 out of the total 200 surveys were used in evaluation from helpers of golf service working as full-time service provider after selecting two locations of golf course located near Busan. From the evaluation of reliability and validity with variables used in this research, they satisfied and confirmed certain standard. Results - The results are as follows. First, as the results of identifying the relationships between person-job fit and emotional intelligence of service provider, person-job fit did not have positive and significant effect on self-understanding. On the other hand, it affected positively and significantly other factors in emotional intelligence such as emotion to others, emotional utilization, and emotional regulation. Second, as the results of identifying the relationship between emotional intelligence and job satisfaction, sub-factors in emotional intelligence such as emotion to others, emotional utilization, and emotional regulation except self-emotion affected significantly and positively job satisfaction. However, self-emotion did not have significant and positive effects on job satisfaction. Conclusion - These results will be valuable and used for service providers. In addition, many service providers will recognize that person-job fit is very important to get a job. This research has a purpose on the assumption that appropriateness between individual and task in service industry shall act as major influence in emotional intelligence of service provider. Recognitive ability of service provider is also very important per characteristics of service, but emotional intelligence that interacts and connected directly with most customers can be a very meaningful factor as well. Emotional intelligence allows people to recognize, understand, and empathize the emotion of customers shall be a positive reinforcement for customers to evaluate the service ultimately.

• The Korean Journal of Malacology
• /
• v.26 no.3
• /
• pp.235-244
• /
• 2010

Ultrastructural characteristics of the testis and spermatogenesis of Crassostrea gigas were investigated by Transmission and Scanning Electron microscope observations. The testis is a diffuse organ consisting of branching acini containing differentiating germ cells in a variety of stages. The acinus is surrounded by an intermitent layer of myoepithelial cells andis divided into subcompartments that are partially separated by pleomorphic accessory cells which remain in close contact with germ cells until late stages of development. these accessory cells contain a large quantity of glycogen particles and lipid droplets in the cytoplasm. Therefore, it is assumed that they are involved in the supplying of the nutrients for germ cell development, while any phenomena associated with phagocytosis of undischarged, residual sperms by lysosomes could be find in the cytoplasm of the accessory cells. The morphology of the spermatozoon has a primitive type and is similar to those of other bivalves. Mature spermatozoa consist of broad, cap-shaped acrosomal vesicle, subacrosomal material (containing axial rod embedded in a granular matrix), a oval nucleus showing deeply invaginated anteriorly, two triplet substructure centrioles surrounded by four spherical mitochondria, and satelite fibres appear to the distal centriole and plasma membrane. Spermatozoa of C. gigas resemble to those of other investigated ostreids. In particular, the anterior region of the acrosomal vesicle is transversely banded. It is assumed that differences in this acrosomal substructure are associated with the inability of fertilization between the genus Crassostrea and other genus species in Ostreidae. Therefore, we can use sperm morphology in the resolution of taxonomic relationships within the Ostreidea. The spermatozoon is approximately $42-47{\mu}m$ in length including an oval sperm nucleus (about $0.91{\mu}m$ in length), an acrosome (about $0.42{\mu}m$ in length) and tail flagellum ($40-45{\mu}m$). The axoneme of the sperm tail flagellum consists of nine pairs of microtubules at the periphery and a pair at the center. The axoneme of the sperm tail shows a 9 + 2 structure. These morphological charateristics of acrosomal vesicle belong to the family Ostreidae in the subclass Pteriomorphia.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.5
• /
• pp.408-416
• /
• 2021

In the ultrasonic dispersion, in order to avoid direct contact of the radiation surface of ultrasonic transducers with a liquid sample, the liquid sample is separated by a glass container and it receives ultrasonic energy through an acoustic medium. The transmission efficiency of the ultrasonic energy in the multi-layered ultrasonic system is an important factor. In this study, we suggested a method that can improve the ultrasonic energy transfer efficiency by using a propylene glycol solution as a liquid matching layer in the multi-layered acoustic system. In this method, a propylene glycol solution was filled between the Langevin-type ultrasonic transducer and the luminol solution and the sonoluminescence phenomena in the luminol solution, which is caused by nonlinear effect of high power ultrasound radiated from the transducer, was examined by using a Photo Multiplier Tube (PMT). The transmission efficiency depending on the concentration of propylene glycol solution was observed, and we can see that as the concentration of the propylene glycol solution increased, the matching effect increased while the acoustic attenuation increased. It was confirmed that there is an optimal concentration compromised these two conflicting conditions, and the optimum concentration of the propylene glycol solution was determined experimentally.

• Journal of Korean Library and Information Science Society
• /
• v.52 no.3
• /
• pp.267-285
• /
• 2021

Due to COVID-19, user instruction programs could not be conducted face-to-face, and the sessions have been moved online. The present study attempted to investigate how online user instruction influences the information literacy ability of college students. The study randomly selected college students (N=50) who completed online user instruction sessions and college college students (N=50) who did not complete them among freshment who went to to college in 2020 to measure their information literacy abilities. For this study, a tool for measuring information literacy abilities was developed by referring to several previous studies. The measurement results were analyzed by the independent samples t-test, and significant differences were found between students who completed online user instruction sessions and those who did not. The findings of the study have confirmed that it is effective in enhancing library users' information literacy abilities to provide user instruction online under the COVID-19 situation, and even in post-COVID 19 times, which helps them appropriately utilize the characteristics of digital libraries. The information literacy measurement tool used in the present study was developed to evaluate online information literacy, and thus contributed to the extension of the literature of digital information literacy and user instruction. The present study provided practical implications for how academic libraries will promote information services to cope with environmental changes in which contact-free (untact) services are obliged.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.679-686
• /
• 2019

Characteristics of adsorption equilibrium, kinetic and thermodynamic of aniline blue onto activated carbon from aqueous solution were investigated as function of initial concentration, contact time and temperature. Adsorption isotherm of aniline blue was analyzed by Langmuir, Freundlich, Redlich-Peterson, Temkin and Dubinin-Radushkevich models. Langmuir isotherm model fit better with isothermal data than other isotherm models. Estmated Langmuir separation factors ($R_L=0.036{\sim}0.068$) indicated that adsorption process of aniline blue by activated carbon could be an effective treatment method. Adsorption kinetic data were fitted to pseudo first order model, pseudo second order model and intraparticle diffusion models. The kinetic results showed that the adsorption of aniline blue onto activated carbon well followed pseudo second-order model. Adsorption mechanism was evaluated in two steps, film diffusion and intraparticle diffusion, by intraparticle diffusion model. Thermodynamic parameters such as Gibbs free energy, enthalpy and entropy for adsorption process were estimated. Enthalpy change (48.49 kJ/mol) indicated that this adsorption process was physical adsorption and endothermic. Since Gibbs free energy decreased with increasing temperature, the adsorption reaction became more spontaneously with increasing temperature. The isosteric heat of adsorption indicated that there is interaction between the adsorbent and the adsorbate because the energy heterogeneity of the adsorbent surface.

• 재활복지
• /
• v.21 no.4
• /
• pp.177-193
• /
• 2017

The purpose of this study was to examine the factors that affect the awareness of disabled in undergraduate students. A sample of 1,998 respondents was surveyed. Of these, a total of 1,957 questionnaires were analysed excluding the 41 questionnaires that did not agree with the survey or had a missing data. The questionnaire consists of the general characteristics, experience related to disability and disability awareness and we used a 4-point Likert scale. Collected data was analyzed using the SPSS 24.0 program and descriptive statistics, t-test, variance analysis and multiple regression analysis were used. According to the results of the study, the disability awareness score of our respondents was average 40.52. Second, female students had more positive about disability awareness than male ones, and senior students had more positive awareness than other grade students. Third, non-rehabilitation department students' disability awareness was more positive than rehabilitation students. Fourth, the disability awareness of people who have a acquaintance member with disability or health worker were significantly positive. Finally, the awareness of people who experienced at the disability related institution were significantly positive. Therefore, to improve the awareness of undergraduate students about disabilities, it is required to activate positive contact experiences with people with disabilities rather than theoretical learning.