• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.4
• /
• pp.393-399
• /
• 2005

Since vegetations are near the wavelength range in 700nm and have absorbent as well as reflective wavelength ranges, there is a much difference in terms of its reflection rate. There are currently many researches on vegetation index being conducted in order to apply the remote-sensing technology to vegetations rising their characteristics of absorbent and reflective wavelength ranges. Normalized Difference Vegetation Index (NDVI) and Perpendicular Vegetation Index (PVI) have been most commonly used. It is usually the evaporation, carbon-dioxide consumption, and chlorophyll density that represent the activity of vegetation, but chlorophyll density is the most commonly used among them. Since the red wavelength range used to obtain the NDVI and PVI has a strong extinction of chlorophyll, it is also useful to test chlorophyll density. The NDVI, in particular, is used to identify the vegetation conditions summarily, and thus, is suitable for initiative researches. Nevertheless, since these vegetation index produce mixed information of the Vegetation vigor and vegetation cover, it is essential to monitor a wavelength range that is independent from redundancy of the Vegetation vigor and vegetation cover. Although many vegetation indices have evaluated both the vegetation vigor and Vegetation cover simultaneously, this research intends to emphasize the utility of separable evaluations of the Vegetation vigor and Vegetation Cover rate through an experiment with grasses. As a result of evaluating vegetation index using spectral reflectance, a separable evaluation of the vegetation vigor and cover has been found more useful.

• Clean Technology
• /
• v.23 no.3
• /
• pp.237-247
• /
• 2017

In the dimethyl ether (DME) synthesis and separation process, over 8% by mole of $CO_2$ is fed to the DME synthesis reactor which lowers DME productivity. Therefore, this work focused on the removal of $CO_2$ using three kinds of processes with physical absorbents by comparing the utility consumption through computer simulation of each process. Among the processes selected for comparison are Rectisol$^{(R)}$ process using methanol, Purisol$^{(R)}$ process using n-methyl pyrrolidone (NMP), and SelexolTM process using dimethyl ethers of polyethylene glycol (DEPG) as a solvent. As a result of this study, it was concluded that Purisol$^{(R)}$ process consumes the least energy followed by SelexolTM process. Therefore, it is considered that Purisol$^{(R)}$ process is the most suitable method to absorb $CO_2$ contained in the feed of DME synthesis reactor.

• The Korean Journal of Community Living Science
• /
• v.16 no.1
• /
• pp.149-163
• /
• 2005

Family has emerged as a key concept for health, and it has been identified as one of the most important conditions. The relationship between health habit and its management is different depending on family. The odd pair family, mostly rural lower income class, worry to have poor health because of no spouse and small family size. One thousand eight hundred and seventy(1870) subjects were collected in 9 provinces through the sampling of Probability Proportional to Size (PPS). Questionnaire method was conducted on health checking, bath states, alcohol consumption, cigarette smoking, and the prevalence of farmer's health related problems. The main results were as follows: 1) The characteristics of odd pair families are that the head of household is female(77% ), the size of family is small(1.76 persons), the education level is low(7.5 years for male, 3.1 years for female) and the age group is old (male: 89.78 year old, female: 73.69 year old). 2) For the odd pair family, the frequency of health checking is quite low with one or two times per year(l0.2%) and the rate of no-health checking is much higher(35.8%) .3) Bathing utility is not available 29.6% of the odd pair family and only cold water is supplied at home for the 11.5 % of them. However, for the paired family, 9.8 % of them has no bathing utility and the rate of the family supplied with only cold water is just 7.9%. 4) The bathing frequency score of odd pair family is l.74points for male and 1.25 points for female. 5) The rate of smoking habits for odd pair family is 68.5 % and specially it is 7.6% for female, which is higher comparing with that of pair family. 6) The smoking frequency score of odd pair family is 1.57 points. 7) Alcohol drinking frequency score of odd pair family is 1.79 points for male, and 3.24points for female. 8) Farmers' syndrome(FS) revealed 38.7% of odd pair family and it is lower than that of pair family(57.3%). Special pain of FS was huckle bone and muscle(28.4%) and articular pain(24.l %). The pain rate of huckle bone and muscle(43.l %) and articular pain(33.5%) were higher in a year in odd pair family were lower than those of pair family: farming machine caused accidents(6.5%) and pesticide poisoning(5.7%). l0) The odd pair family use more frequently medical clinic or public health center for the treatment of FS(74.7%) and pesticide poisoning(62.5%) than the pair family for FS(69.0%) and for pesticide poisoning(.53.6%). The score of FS treatment is 5.70 points for odd pair family and it is not significantly different from 5.62 points of the paired family. The result of pesticide poisoning treatment score is as same as that of FS.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.2
• /
• pp.86-100
• /
• 2015

Cloud computing is a computing term that evolved in the late 2000s, based on utility and consumption of computer resources. Google say that "Cloud computing involves deploying groups of remote servers and software networks that allow different kinds of data sources be uploaded for real time processing to generate computing results without the need to store processed data on the cloud. Cloud computing relies on sharing of resources to achieve coherence and economies of scale, similar to a utility (like the electricity grid) over a network. At the foundation of cloud computing is the broader concept of converged infrastructure and shared services. Cloud computing, or in simpler shorthand just "the cloud", also focuses on maximizing the effectiveness of the shared resources." The cloud service is a smart and/or intelligent service to save private files in any device, anytime, anywhere. Dropbox, OAuth, PAClous are required that the accumulated user's data are archives with cloud service. Currently we suggest an implementation technique to process many tasks to the cloud server with a thread pooling. Thread pooling is one of efficient implementating technique for client and service environment. In this paper, to present the implementation technique we suggest three diagrams in the consideration of software engineering.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.1-11
• /
• 2020

As an important basic building block of the smart grid environment, smart meter provides real-time electricity consumption information to the utility. However, ensuring information security and privacy in the smart meter data aggregation process is a non-trivial task. Even though the secure data aggregation for the smart meter has been a lot of attention from both academic and industry researchers in recent years, most of these studies are not secure against internal attackers or cannot provide data integrity. Besides, their computation costs are not satisfactory because the bilinear pairing operation or the hash-to-point operation is performed at the smart meter system. Recently, blockchains or distributed ledgers are an emerging technology that has drawn considerable interest from energy supply firms, startups, technology developers, financial institutions, national governments and the academic community. In particular, blockchains are identified as having the potential to bring significant benefits and innovation for the electricity consumption network. This study suggests a distributed, privacy-preserving, and simple secure smart meter data aggregation system, backed up by Blockchain technology. Smart meter data are aggregated and verified by a hierarchical Merkle tree, in which the consensus protocol is supported by the practical Byzantine fault tolerance algorithm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4733-4739
• /
• 2012

While traditional two-axis tracking systems with double sensors had been using two sensors to control azimuth and elevation angle of the sun so that a solar cell module would make a normal line with the sun, this paper proposed a new two-axis system that can achieve the same performance with only one sensor in it. It is Two-axis tracking system that control azimuth and elevation to control to be reduced for solar cell module as proposed tracking system uses 1 sensors and the sun always forms normal. Two-axis tracking system of one sensor method that propose in paper that could reduce electric power consumption and sees than fixed type preventing action and the most efficient driving and needless drive could confirm that generation efficiency of about 23 [%] increases. To heighten efficiency of solar cell doing to receive more sunlights chasing the sun, done tracking device have proceeded a lot of studies in large size way. Therefore, is expected that will do big part in the sun tracking supply through utility study about persistent generation efficiency constructing monitoring system of the sun tracking of this paper.

• ETRI Journal
• /
• v.36 no.3
• /
• pp.352-360
• /
• 2014

This paper presents a 900 MHz zero-IF RF transceiver for IEEE 802.15.4g Smart Utility Networks OFDM systems. The proposed RF transceiver comprises an RF front end, a Tx baseband analog circuit, an Rx baseband analog circuit, and a ${\Delta}{\Sigma}$ fractional-N frequency synthesizer. In the RF front end, re-use of a matching network reduces the chip size of the RF transceiver. Since a T/Rx switch is implemented only at the input of the low noise amplifier, the driver amplifier can deliver its output power to an antenna without any signal loss; thus, leading to a low dc power consumption. The proposed current-driven passive mixer in Rx and voltage-mode passive mixer in Tx can mitigate the IQ crosstalk problem, while maintaining 50% duty-cycle in local oscillator clocks. The overall Rx-baseband circuits can provide a voltage gain of 70 dB with a 1 dB gain control step. The proposed RF transceiver is implemented in a $0.18{\mu}$ CMOS technology and consumes 37 mA in Tx mode and 38 mA in Rx mode from a 1.8 V supply voltage. The fabricated chip shows a Tx average power of -2 dBm, a sensitivity level of -103 dBm at 100 Kbps with PER < 1%, an Rx input $P_{1dB}$ of -11 dBm, and an Rx input IP3 of -2.3 dBm.

• Journal of the Korean Society of Costume
• /
• v.64 no.4
• /
• pp.176-187
• /
• 2014

Although DIY(Do-It-Yourself) clothes are not popular in Korea, they continually reflect emerging DIY trends. Previous studies have approached the technical aspect of DIY clothes or have considered them only as an aspect of consumption tendencies. The purpose of this study is to look into online communities to investigate distinctive elements, which form the DIY clothing culture. Participant observation of texts and pictures from the online community's postings about DIY was conducted and used for the analysis. Research results showed that personal and social factors motivated DIY clothes. Personal motivations are comprised of factors such as practical creativity and personal enjoyment. Practical creativity occurred when someone wished to express aesthetics and personality in DIY clothes; personal enjoyment refers to the pleasure and utility that one feels when one makes DIY clothes. The social motivations were comprised of factors such as a desire to show off and to expand social exchanges. The desire to show off involved wearing DIY clothes and then finding satisfaction from reactions of people who notice it. The "expansion of exchanges" was not only about sharing information about DIY clothes in an online community but also about distributing or giving real goods (materials or tools for DIY clothes and finished goods) as gifts. Furthermore, some "DIYers" made DIY clothes sustainable by pursuing economic feasibility as an additional motivational factor. When they had expertise and commercial traits, they established businesses in the form of independent creative firms, transforming themselves from productive consumers to producers.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.4
• /
• pp.295-309
• /
• 2019

This paper demonstrates that the verification and analysis of the increase of hosting capacity of distributed energy resources in distribution system for the high penetration of distributed energy resources. In the case of generally designed distribution feeders in South Korea, it can host up to 10 MVA of distributed energy resources and the over voltage due to reverse power flow is prohibited beyond the range by the law of electric utility. However, it should take into consideration that there are some factors of extra hosting capacity such as generation characteristics of distributed energy resources and minimum loads that always exist to distribution system. For these reason, we choose a specific distribution system hosted 10 MVA of distributed energy resources monitored by distribution system operator and verify the impact of increasing hosting capacity such as power flow and voltage profile of distribution system. By the result, we could find that it is possible to increase the hosting capacity and define the factors to expand the hosting capacity of distributed energy resources in distribution system.

• The Journal of the Korea Contents Association
• /
• v.9 no.5
• /
• pp.137-144
• /
• 2009

Culture contents industry in Gyeongbuk province has consumption system, being small-scale, an lacking infrastructure, imbalance, a shortage of strategy, and so on. But, culture contents industry in Gyeongbuk province has great possibilities in abundant culture resources, a prospect of the culture contents industry and future effective promotion strategy. And the promotion plans are the digitalization of the cultural original form, the edutainment of the Confucianism culture, construction of a traditional cultural digital center, location marketing, establishment of Documentary Film Council, culture literacy, an orientation of small film, promotion of the global city and the culture base city, development of killer contents, exploitation of tourism resource, discriminating strategy, and so on. Actually Gyeongbuk province should need to promote the culture contents industry because of high added value, an effect on related industries, utility of the digital culture contents, extension of a market scale, a rapid growth speed, and so on.