• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.2
• /
• pp.311-324
• /
• 2015

This study presents computational analyses for low-drag aerodynamic design that are applied to modify a long-endurance UAV. EAV-2 is a test-bed for a hybrid electric power system (fuel cell and solar cell) that was developed by the Korean Aerospace Research Institute (KARI) for use in future long-endurance UAVs. The computational investigation focuses on designing a wing with a reduced drag since this is the main contributor of the aerodynamic drag. The airfoil and wing aspect ratio of the least drag are defined, the fuselage configuration is modified, and raked wingtips are implemented to further reduce the profile and induced drag of EAV-2. The results indicate that the total drag was reduced by 54% relative to EAV-1, which was a small-sized version that was previously developed. In addition, static stabilities can be achieved in the longitudinal and lateral-directional by this low-drag configuration. A long-endurance flight test of 22 hours proves that the low-drag design for EAV-2 is effective and that the average power consumption is lower than the objective cruise powerof 200 Watts.

• Environmental Engineering Research
• /
• v.23 no.1
• /
• pp.10-20
• /
• 2018

Buildings are responsible of major energy consumption globally. In addition, they are linked to thermal comfort. The need to provide comfort becomes more crucial in schools as they are the place where students learn, and develop their skills. This research aims to investigate the energy responsiveness of new and traditional school building design, where major variation in form, amount of external walls and glazing are different. The research focused on indoor microclimate condition of selected schools in the city of Jeddah where the climate is hot and humid using advanced tools for monitoring. The research uses advanced energy equipment to measure several aspects such as floor temperature, roof temperature, globe temperature and other factors which can lead to predictable thermal comfort of users. The findings suggest that a larger area of glazing shielded from sunlight has a greater influence on both indoor condition and general thermal sensation. The finding also suggests that the glazing ratio is a major contributor on indoor thermal pattern which can result in an increase in temperature profile between from $7-10^{\circ}C$. The findings of this research can assist in the improvement in the design of the prototype school building in hot and humid climate.

• Journal of Environmental Health Sciences
• /
• v.28 no.5
• /
• pp.22-27
• /
• 2002

The composting practice has been recognized as the most popular way of controlling food waste and many attempt have been made in the field to establish more efficient and economical process. Some of the efforts are mixing cured compost with sawdust as alternative bulking agent, seeding commercially produced microorganism and/or combination of above. However, verification of such efforts is often restricted because of either the lack of engineering consideration on the limitation of composting facility scales. In this study, the effect of mixing materials in food waste composting was investigated by controlling the combination and the mixing ratio of them. When the cured compost was mixed with saw dust. the decomposition of organic material was proven to be more active by observing the compost temperature, the oxygen (O$_2$) consumption, and the cumulative carbon dioxide ($CO_2$) profile. However, the quantity of compost mix-ing seemed not to influence the reaction as long as the minimum required amount was mixed. The feeding of com-mercially produced microorganism had a tendency to prolong the thermophilic stage, which helped to increase the decomposition but it resulted in composting period. Regardless of the composting condition, bacteria and actinomycetes increased in population as the reaction approached to the end. The population of bacteria and actinomycetes were rel-atively higher than those of fungi and yeast throughout the reaction.

• Journal of Korean Biological Nursing Science
• /
• v.11 no.1
• /
• pp.1-13
• /
• 2009

Purpose: This study was conducted to evaluate the effects of table tennis program on self efficacy, cardiopulmonary function, serum lipids, catalase activity in the physical disabilities. Method: Physical disabilities were allocated to one of two groups: control group (n=7), experiment group (n=8). The experiment group took table tennis program four times a week for 12 weeks. Self efficacy was measured by questionnaire. Serum lipid profiles, catalase and cardiopulmonary function were checked after the exercise program and compared with pre-exercise data. Result: Self efficacy was significantly higher in the table tennis group. Maximum oxygen consumption and forced vital capacity were significantly increased and heart rate at rest was decreased in the table tennis group. Total cholesterol and triglyceride were decreased in the table tennis group. There was no significant change in catalase activity between two groups. Conclusion: These results indicate that table tennis program has positive effects on the health of the physical disabilities by improving the self efficacy and cardiopulmonary function and serum cholesterol profile.

• Journal of Nutrition and Health
• /
• v.37 no.6
• /
• pp.455-463
• /
• 2004

Flavonoids contained in grapes are potent antioxidants that may protect against oxidative stress and reduce the risk of chronic diseases related with free radical damage. In this study we investigated the effect of daily grape juice supplementation on blood pressure (BP), plasma lipid profiles and the generation of free radicals in 67 healthy volunteers (29 smoker, 38 nonsmokers). The daily 480 ml of grape juice supplementation for 8 weeks resulted in a significant decrease in diastolic BP by 6.5％ in smokers and systolic and diastolic BP by 11.2 and 3.7％ in non-smokers. Plasma total cholesterol, HDL- and LDL-cholesterollevels in smokers and total cholesterol in non-smokers were significantly increased after the intervention. Plasma triglycerides and conjugated dienes were not affected by grape juice supplementation. Levels of free radical determined by reading the lucigenin-perborate ROS generating sources, decreased significantly by 18％ compared to the beginning of the study. The results indicated that the consumption of grape juice may reduce BP and free radical generation in smokers, which was possibly exerted by flavonoids. Our findings suggested that the grape juice has protective effect on chronic disease due to the overproduction of free radical in smokers.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.1
• /
• pp.71-81
• /
• 2016

To evaluate the effects of magnetic force for transporting the dredged soil, magnetic energy inducing device was installed at the dredger. The whole length of transporting pipeline reaches more than 8.5km and the efficiency of the system and the characteristics of the flow are critical factors. The main parameters which govern the flow are flow-rate, velocity, concentration and slip-layer's condition, so in the field test monitoring system was applied to check the real time conditions of the closed circuit flow and the main parameters. From analyzing the relation between the dredged soil amounts and the pump power, it can be concluded that the magnetic forces effect on the transporting system, increase the transporting quantities of dredged soil and decrease power consumption of the pump.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.858-863
• /
• 1988

A micro-processor based control system for a brushless DC motor used in the motor-driven electromechanical total artificial heart was developed. Functionally, the control system is composed of two parts. The first part is the velocity and position controller to assure that the motor follows a predetermined optimal velocity profile with minimal energy consumption, and to guarantee the full stroke length. This part also utilize the passive adaptive control method to be robust against the load disturbance, system parameter variation, and uncertainty which is the environment of artificial heart system. The pump output control is the second part, and this part provides the required responses of the artificial heart to the time-varying physiologic demands. The basic requirements of these responses are preload sensitivity, afterload insensitivity, and the balanced ventricular outputs. The performance and reliability of this control system was evaluated through a series of mock circulation tests and animal implantation, and the results are very encouraging.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.116-121
• /
• 2012

In recent years, world is faced with a transportation energy dilemma, and the transportation is dependent on a single fuel - petroleum. However, Hybrid Electric Vehicle(HEV) technology holds more advantages to reduce the demand for petroleum in the transportation by efficiency improvements of petroleum consumption. Therefore, there is a trend that lower gear noise levels are demanded in HEV for drivers to avoid annoyance and fatigue during operation. And meshing transmission error(T.E.) is the excitation that leads to the tonal noise known as gear whine, and radiated gear whine is also the dominant source of noise in the whole gearbox. This paper presents a method for the analysis of gear tooth profile and lead modification, and the predictions of transmission error and load distribution are shown under one loaded torque for the 1st gear pair of HEV gearbox. The test is also obtained before tooth micro-modification under the torque. At last, the appropriate tooth modification is used to minimize the transmission error and load distribution under the loaded torque. It is a good approach which the simulated result is used to improve the design in order to minimize the radiation gear whine noise.

• Tribology and Lubricants
• /
• v.20 no.6
• /
• pp.322-329
• /
• 2004

Recently, a load/unload(L/UL) system is adopted to the hard disk drive(HDD) due to its advantages such as lower power consumption, larger data zone, simpler fabrication of disk due to no bumped parking zone, and rarer contact between slider and media. An analysis of the transient motion for the slider is very important to design an air bearing surface(ABS) of the slider to secure the stable performance of the system. During the L/UL process, however, there are several issues occurred such as contact or collision between slider and media. Sometimes this will cause the system failure. In this study, the dynamics of a pico slider during the loading process are investigated through numerical simulation using FEM analysis and experiment. Ramp profile and angular velocity of the swing arm actuator are very important parameters for the design of L/UL system to avoid collision between slider and disk.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.672-679
• /
• 2018

Recently, microgrid (MG) has been proposed as one of the most critical solutions for various energy problems. For the optimal and economic operation of MGs, it is very important to forecast the load profile. However, it is not easy to predict the load accurately since the load in a MG is small and highly variable. In this paper, we propose an artificial neural network (ANN) based method to predict the energy use in campus buildings in short-term time series from one hour up to one week. The proposed method analyzes and extracts the features from the historical data of load and temperature to generate the prediction of future energy consumption in the building based on sparsified K-means. To evaluate the performance of the proposed approach, historical load data in hourly resolution collected from the campus buildings were used. The experimental results show that the proposed approach outperforms the conventional forecasting methods.