• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.129.3-129
• /
• 2001

In this paper, a novel navigation method is presented for the cleaning robot in the unknown workspace. In order to do this, we propose a new map representation method and a complete coverage navigation method. First, we discuss a triangular cell map representation which makes the cleaning robot navigate with shorter path and increased flexibility than a rectangular cell map representation. Then we proposed a complete coverage navigation and map construction method which the cleaning robot can navigate the complete workspace although it has perfectly no information about environment. Finally, we evaluate the performance of our proposed triangular cell map comparing to that of the rectangular cell map via the existing ...

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.810-815
• /
• 2003

This research is concerned with the development of an Internet-based robot system, which is insensitive to the unpredictable Internet time delay. For that purpose, a simple mobile robot system that moves in response to the user' direct control on the Internet has been built. The time delay in data transmission is a big problem for the construction of this kind of system. Therefore, the PPS (Position Prediction Simulator) is suggested and implemented to compensate for the time delay problem of the Internet. The simulation and experimental result show that the distance error can be reduced using the developed PPS.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1458-1462
• /
• 2003

High temperature and high pressure heavy water flows through the pipes in atomic power plants. The curved parts of pipes are critical parts in that they change the direction of steam flow, and these parts are especially affected by severe wear. Therefore, most pipes in atomic power plants are tested by non-destructive examination by workers who use ultrasonic sensors to measure the wall thickness of pipes. But not only are these pipes located in a very dangerous environment, but the space is also very limited. For the safety of workers, it is necessary to design a device that uses a mobile robot that can inspect curved pipes. This paper presents the design and construction of a small device that can generate the necessary contact forces between ultrasonic sensors and pipe walls in a limited space. And a mobile robot is used in place ortho worker for successful non-destructive examination.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.133-144
• /
• 2000

The dynamic walking planning and the inverse dynamics of the biped robot is investigated in this paper. The biped robot is modeled with 14 degrees of freedom rigid bodies considering the walking pattern and kinematic construction of humanoid. The method of the computer aided multibody dynamics is applied to the dynamic analysis. The equations of motion of biped are initially represented as terms of the Cartesian corrdinates then they are converted to the minimum number of equations of motion in terms of the joint coordinates using the velocity transformation matrix. For the consideration of the relationships between the ground and foot the holonomic constraints are added or deleted on the equations of motion. the number of these constraints can be changed by types of walking patterns with three modes. In order for the dynamic walking to be stabilizable optimized trunk positions are iteratively determined by satisfying the system ZMP(Zero Moment Point) and ground conditions.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.548-555
• /
• 2000

The dynamic walking and the inverse dynamics of the biped walking robot is investigated in this paper. The biped robot is modeled with 14 degrees of freedom rigid bodies considering the walking pattern and kinematic construction of humanoid. The method of the computer aided multibody dynamics is applied to the dynamic analysis. The equations of motion of biped are initially represented as terms of the Cartesian coordinates, then they are converted to the minimum number of equations of motion in terms of the joint coordinates using the velocity transformation matrix. For the consideration of the relationships between the ground and foot, the holonomic constraints are added or deleted on the equations of motion. The number of these constraints can be changed by types of walking pattern with three modes. In order for the dynamic walking to be stabilizable, optimized trunk positions are iteratively determined by satisfying the system ZMP(Zero Moment Point) and ground conditions.

• Journal of Drive and Control
• /
• v.14 no.3
• /
• pp.25-31
• /
• 2017

This study presents a methodology for simulating a unified approach that controls interaction force between tool and objective by using a synthesis method of robot interacting control law for stabilizing the transient process of motion. Root locus is used to analyze stabilization of motion deviation characteristics. Based on responses of motion deviation, contact force is derived to satisfy exponential stability and we generate control input with respect to motion trajectories and interaction force. Moreover, simulation is applied to experimental application of a Cartesian robot driven by two stepper motors, and the noise of feedback signals is considered as presence of system inaccuracies, and the unified approach of interaction force control is examined precisely.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.151-156
• /
• 1998

In this paper, we present new control method for robot manipulators. The design objective can be the implementation of minimax controller with H$_{\infty}$ performance via LMI approach to guarantee the robustness and to obtain the exact tracking performance for robot manipulators with system parameter uncertainty and exogenous disturbance. We show that the Algebraic Riccati equation (ARE) which is needed for the construction of H$_{\infty}$ controller can be recast into the Algebraic Riccati Inequality (ARI) and the optimal control gain can be obtained by convex optimization method. Then, we will apply the proposed controller to rigid robot manipulators for verifying the performance of our controller.

• Journal of Drive and Control
• /
• v.17 no.4
• /
• pp.15-22
• /
• 2020

With the need for efficient maintenance technology to reduce maintenance costs for steel bridges, repainting robots are being developed to automate the work in narrow and poor bridge spaces. The repainting robot is equipped with a blasting module to remove paint layers and contaminants. This study developed a prototype monitoring module to be mounted on the repainting robot. The monitoring module analyzes the condition of the painting surface through a camera installed in the front, guides the direction of movement of the robot, and provides the operator with a video to check the working status after blasting through a camera installed in the back. Various image visibility enhancement technologies were applied to the monitoring module to overcome worksite challenges where incomplete lighting and dust occurs.

• The Journal of Korea Robotics Society
• /
• v.2 no.4
• /
• pp.334-340
• /
• 2007

This paper introduces a prototype smart home environment that is built in the research building to demonstrate the feasibility of a robot-assisted future home environment. Localization, navigation, object recognition and handling are core functionalities that an intelligent service robot should provide. A huge amount of research effort has been made to make the service robot perform these functions with its own sensors, actuators and a knowledge base. With all complicated configuration of sensors, actuators and a database, the robot could only perform the given tasks in a predefined environment or show the limited capabilities in a natural environment. We started a smart home environment for service robots for simple service robots to provide reliable services by communicating with the environment through the wireless sensor networks. In this paper, we introduce various types of smart devices that are developed for assisting the robot in the environment by providing sensor and actuator capabilities. In addition, we present how the devices are integrated to constitute the smart home environment for service robots.

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.9-16
• /
• 2023

This paper analyzed a drainage tower used to drain water in flooded areas. Multi-body dynamics simulation was used to analyze the dynamic behavior of the drainage tower. Structural analysis, flexible-body dynamic analysis, and rigid body dynamic analysis were done to study the maximum Von-Mises stress of the drainage tower. The results showed that the maximum Von-Mises stress occurs at the turn table, and it decreases when the angle of the boom is increased. Also, the rate of the change of angle affects the maximum stress so that the maximum stress changes more when the angular velocity of the boom increases. Based on the rigid body dynamic analysis and the theoretical analysis results, the centrifugal force from the angular velocity makes the difference in the maximum stress at the turn table because of the difference in their direction. Consequently, it was concluded that the centrifugal force should be considered when designing construction machinerythat can rotate.