• 제목/요약/키워드: Construction morphology

검색결과 119건 처리시간 0.031초

댐 하류 충적하천에서 식생이입 및 천이 - 낙동강 안동/임하 댐 하류하천을 중심으로 - (Recruitment and Succession of Riparian Vegetation in Alluvial River Regulated by Upstream Dams - Focused on the Nakdong River Downstream Andong and Imha Dams -)

  • 우효섭;박문형;조강현;조형진;정상준
    • 한국수자원학회논문집
    • /
    • 제43권5호
    • /
    • pp.455-469
    • /
    • 2010
  • 낙동강 상류에 위치한 안동, 임하 댐 하류 하천에서 두 댐에 의한 충적하천의 변화와 식생이입 현상을 정성적, 정량적으로 조사, 분석하였다. 하천형태 및 하상재료 분석 결과, 댐 하류는 전반적으로 저하되었고 일부 구간은 최대 3m 이상 세굴 되었다. 하상재료도 전반적으로 임하댐 건설 전 평균 1.5mm에서 건설 후 2.5mm로 조립화되었다. 댐 건설로 인한 하상소류력의 감소는 사주에 식생 활착을 촉진시켰으며, 그 결과 사주의 식생이입률은 1971년 자연 상태에서 8% 수준에서 안동댐 건설 후 1988년에 25%로 증가하였다. 임하댐이 완공된 1992년 이후 사주 상 식생이입은 가속화되어 겨우 3년이 지난 1995년에 사주 식생이입률은 43%가 되고, 그 후 10년이 지난 2005년에는 74%까지 증가하였다. 세부조사구간 중 하나인 윗절에서 항공사진에 의한 식생천이 현상을 분석한 결과 모래와 자갈이 노출된 '맨' 사주에서 시작하여 큰개여뀌, 달뿌리풀, 버드나무류 유식물 등 개척 단계를 지나, 일부 달뿌리풀은 유지되고 버드나무 관목이 등장하고 나중에는 선버들이나 왕버들 같은 교목림으로 정착되는 것으로 나타났다. 하회마을 앞과 강 건너 점 사주의 경우 타 논문에서 기제시된 여건 등으로 2005년 항공사진에서 식생이입은 억제되는 것으로 보였지만, 2009년에 촬영한 사진에 상당 부분 확대되는 것으로 나타나 이에 대한 대책이 필요하다. 사주 상 식생이입의 가속화는 구담습지 등 자연 상태의 모래하천에서 찾아보기 어려운 독특한 배후습지를 창출하여 환경적으로 종의 다양성이 커져서 서식처로서 가치 자체는 높아질 수 있다. 마지막으로, 댐에 의한 홍수량 감소와 그에 따른 하상소류력 감소가 사주 상 식생이입 및 활착을 가속화시켰다는 가설은 대표 단면에서 무차원 하상전단응력의 검토 결과 확인되었다.

한강하류지형면의 분류와 지형발달에 대한 연구 (양수리에서 능곡까지)

  • 박노식
    • 동굴
    • /
    • 제68호
    • /
    • pp.23-73
    • /
    • 2005
  • Purpose of study; The purpose of this study is specifically classified as two parts. The one is to attempt the chronological annals of Quaternary topographic surface through the study over the formation process of alluvial surfaces in our country, setting forth the alluvial surfaces lower-parts of Han River area, as the basic deposit, and comparing it to the marginal landform surfaces. The other is to attempt the classification of micro morphology based on the and condition premising the land use as a link for the regional development in the lower-parts of Han river area. Reasons why selected the Lower-parts of Han river area as study objects: 1. The change of river course in this area is very serve both in vertical and horizontal sides. With a situation it is very easy to know about the old geography related to the formation process of topography. 2. The component materials of gravel, sand, silt and clay are deposited in this area. Making it the available data, it is possible to consider about not oかy the formation process of topography but alsoon the development history to some extent. 3. The earthen vessel, a fossil shell fish, bone, cnarcoal and sea-weed are included in the alluvial deposition in this area. These can be also valuable data related to the chronological annals. 4. The bottom set conglometate beds is also included in the alluvial deposits. This can be also valuable data related to the research of geomorphological development. 5. Around of this area the medium landform surface, lower landform surface, pediment and basin, are existed, and these enable the comparison between the erosion surfaces and the alluvial surfaces. Approach : 1. Referring to the change of river beds, I have calculated the vertical and horizontal differences comparing the topographic map published in 1916 with that published in 1966 and through the field work 2. In classifying the landform, I have applied the method of micro morphological classification in accordance with the synthetic index based upon the land conditions, and furthermore used the classification method comparing the topographic map published in 1916 and in that of 1966. 3. I have accorded this classification with the classification by mapping through appliying the method of classification in the development history for the field work making the component materials as the available data. 4. I have used the component materials, which were picked up form the outcrop of 10 places and bored at 5 places, as the available data. 5. I have referred to Hydrological survey data of the ministry of Construction (since 1916) on the overflow of Han-river, and used geologic map of Seoul metropolitan area. Survey Data, and general map published in 1916 by the Japanese Army Survbey Dept., and map published in 1966 by the Construction Research Laboratory and ROK Army Survey Dept., respectively. Conclusion: 1. Classification of Morphology: I have added the historical consideration for development, making the component materials and fossil as the data, to the typical consideration in accordance with the map of summit level, reliefe and slope distribution. In connection with the erosion surface, I have divided into three classification such as high, medium and low-,level landform surfaces which were classified as high and low level landform surfaces in past. furthermore I have divided the low level landform surface two parts, namely upper-parts(200-300m) and bellow-parts(${\pm}100m$). Accordingly, we can recognize the three-parts of erosion surface including the medium level landform surface (500-600m) in this area. (see table 22). In condition with the alluvial surfaces I have classified as two landform surfaces (old and new) which was regarded as one face in past. Meamwhile, under the premise of land use, the synthetic, micro morphological classification based upon the land condition is as per the draw No. 19-1. This is the quite new method of classification which was at first attempted in this country. 2. I have learned that the change of river was most severe at seeing the river meandering rate from Dangjung-ni to Nanjido. As you seee the table and the vertical and horizontal change of river beds is justly proportionable to the river meandering rate. 3. It can be learned at seeing the analysis of component materials of alluvial deposits that the component from each other by areas, however, in the deposits relationship upper stream, and between upper parts and below parts I couldn't always find out the regular ones. 4. Having earthern vessel, shell bone, fossil charcoal and and seaweeds includen in the component materials such as gravel, clay, sand and silt in Dukso and Songpa deposits area. I have become to attempt the compilation of chronicle as yon see in the table 22. 5. In according to hearing of basemen excavation, the bottom set conglomerate beds of Dukso beds of Dukso-beds is 7m and Songpa-beds is 10m. In according to information of dredger it is approx. 20m in the down stream. 6. Making these two beds as the standard beds, I have compared it to other beds. 7 The coarse sand beds which is covering the clay-beds of Dukso-beds and Nanjidobeds is shown the existence of so-called erosion period which formed the gap among the alluvial deposits of stratum. The former has been proved by the sorting, bedding and roundness which was supplied by the main stream and later by the branch stream, respectively. 8. If the clay-beds of Dukeo-bed and Songpa-bed is called as being transgressive overlap, by the Eustatic movement after glacial age, the bottom set conglomerate beds shall be called as being regressive overlap at the holocene. This has the closest relationship with the basin formation movement of Seoul besides the Eustatic movement. 9. The silt-beds which is the main component of deposits of flood plain, is regarded as being deposited at the Holocene in the comb ceramic and plain pottery ages. This has the closest relationship with the change of river course and river beds.

경기만 조간대 표층퇴적물의 분포와 특성 (Distribution and properties of intertidal Surface Sediments of Kyeonggi Bay, West Coast of Korea)

  • 이창복;유홍룡;박경수
    • 한국해양학회지
    • /
    • 제27권4호
    • /
    • pp.277-289
    • /
    • 1992
  • 서해 경기만은 대조차 환경으로 해안선을 따라 넓조간대 퇴적층이 발달하여 있다. 이 환경에 분포하는 표층퇴적물의 특성과 그 공간적 분포를 연구하기 위하여 총 400개 가량의 퇴적물 시료가 채취, 분석 및 연구되었다. 경기만의 표층퇴적물 분포는 전반적 인 해안선방향 세립화의 특징을 나타내며, 이러한 분포경향은 조간대 상에서 다시 나 타나 결과적으로 조간대와 조하대를 주부하는 간조선 부근에서 입도분포의 불연속성이 나타난다. 조간대 퇴적물과 조하대 퇴적물은 평균입도와 왜도 등 조직특성이 차이를 보이며, 이는 두 환경 사이에 나타나는 유속 및 지형의 차이에 기인한 현상으로 해석 되었다. 퇴적물의 광물 및 화학성분은 퇴적환경에 따른 차이보다 일차적으로 입소에 의해 조절되는 경향을 나타내었다. 점토광물 조성에서는 스멕타이트가 거의 나타나지 않는 특징을 보였으며, 코발트와 구리 및 니켈 등 일부 금속원소의 경우에서는 반월지 역 조간대 퇴적층에서 특히 농도가 높아 인근 공업 단지로부터 유입된 오염물질의 축 적이 진행됨을 시사하였다. 한편 조간대 환경은 인위적인 해안지형의 변화에 비교적 민감하게 대응하여 퇴적상이 빠르게 변화하며 앞으로 방조제의 축조나 조간대 간첩사 업등을 계획함에 있어 이러한 영향의 고려가 필요할 것으로 사료된다.

  • PDF

Three-dimensional morphometric analysis of mandibule in coronal plane after bimaxillary rotational surgery

  • Lee, Sung-Tak;Choi, Na-Rae;Song, Jae-Min;Shin, Sang-Hun
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제38권
    • /
    • pp.49.1-49.9
    • /
    • 2016
  • Background: The aim of this report is to present a new reference for aesthetic mandible surgery using three-dimensional cone-beam computed tomography-based treatment planning for orthognathic surgery which can be implemented in surgical planning and perioperative procedure. Methods: To make an objective standard for evaluating aesthetic mandibular outline, we make an aesthetic scoring criteria with consideration of asymmetry, broad mandibular border line, and prominent mandibular angle. Two maxillofacial surgeons and two orthodontists rated their aesthetical evaluation from 1 to 5. Experimental group consisting of 47 female and 38 male patients who had rotational orthognathic two-jaw surgery from 2010 to 2011 were chosen according to aesthetic scoring done by two maxillofacial surgeons and two orthodontists. A high aesthetic score (${\geq}16$) means the facial contour is symmetric, with no broad and narrow aesthetic mandible frontal profiles. Control A group consisted of ten female and ten male patients who had no orthognathic surgery experience and low aesthetic score (${\geq}10$). Control B group consisted of ten female and ten male patients who had no orthognathic surgery experience and had anaesthetic mandibular frontal profile and a high aesthetic score (${\geq}16$). The three-dimensional image of the patient was taken from dental cone-beam CT (DCT) scanning (experimental group and control A group: 6 months DCT after surgery, control B group: 1st visit DCT). Each DCT was reformatted to reorient the 3D image using 3D analyzing program (OnDemand3D, cybermed Inc, CA, USA). After selection of 12 landmarks and the construction of reoriented horizontal, vertical, and coronal reference lines, 15 measurements were taken in 3D analysis of frontal mandibular morphology. Afterwards, horizontal and vertical linear measurements and angular measurements, linear ratio were obtained. Results: Mean $Go^{\prime}_{Rt}-Me^{\prime}-Go^{\prime}_{Lt}$ angular measurement was $100.74{\pm}2.14$ in female patients and $105.37{\pm}3.62$ in male patients. These showed significant difference with control A group in both genders. Ratio of $Go^{\prime}_{Rt}-Go^{\prime}_{Lt}-Me^{\prime}$ length to some linear measurements (ratio of $Me^{\prime}-Cd^{\prime}_{Rt}Cd^{\prime}_{Lt}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$, ratio of $Me^{\prime}-Go^{\prime}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$, ratio of $Go^{\prime}_{Rt}-Go^{\prime}_{Lt}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$) showed significant difference with control A group in both genders. Conclusion: This study was intended to find some standard measurement of mandible frontal view in 3D analysis of aesthetic patient. So, these potential measurement value may be helpful for orthognathic treatment planning to have more aesthetic and perspective outcomes.

산림과 농업 개발로 인한 쿠시로습원 타호부호수의 최근 토사동태 (Status of Sediment Dynamics in Lake Takkobu of the Kushiro Mire, Japan, Associated with Forestry and Agricultural Development in the Watershed)

  • 안영상
    • 한국토양비료학회지
    • /
    • 제43권5호
    • /
    • pp.755-763
    • /
    • 2010
  • 농지 개발로 인한 다량의 세립토사 유입은 타호부호수의 생태계를 악화시키고 있다. 호수 퇴적물의 물리적 특성, $^{137}Cs$, 과 화산재를 이용한 연대측정을 위해 호수 퇴적물 시료 15개를 채취하였다. 타호부호수에서 과거 300년간 토사퇴적속도를 조사한 결과, 유역에서 인위적 개발이 없는 1898년 이전 자연상태에서는 토사퇴적량이 0.1-1.1 mm $year^{-1}$였고, 인위적 개발이 시작된 1898년 이후에는 0.6-12.8 mm $year^{-1}$로 급격하게 증가하였다. 즉, 산림벌채, 하천공사와 농지개발 이후 토사퇴적량은 자연상태보다 6-12배 증가하여 호수의 수심이 얕아지는 현상을 가속시켰다. 1898년부터 1963년 사이의 호수 토사퇴적속도는 개별 소유역으로부터 토사유입 영향에 따라 공간적인 변화가 나타났다. 특히 1898년부터 1963년 사이의 호수 남쪽부분의 토사퇴적량은 산림벌채에 의한 숯 생산과 생산된 숯을 수송하기 위한 운하공사로 인해 호수 중앙과 북쪽부분보다 많았다. 하지만 1963년 이후 남쪽부분의 토사퇴적량이 감소하고 중앙과 북쪽부분에서 토사퇴적량이 증가하여 호수 안에서 토사퇴적의 공간적 변화는 없었다. 왜냐하면 호수 남쪽부분에서 많은 양의 토사퇴적은 호수 수심을 얕게 하여 토사를 침전시키는 능력을 감소시켰기 때문으로 생각되었다. 특히 하천 출구에 위치한 지점의 토사퇴적량은 자연상태에 비해 5-32배 높았다. 그리고 쿠시로강(평상시 타호부호수는 쿠시로강으로 배수)은 홍수시 탁수가 역류하여 호수로 유입하기 때문에 토사 유입 증가에 공헌하고 있는 것으로 나타났다.

알루미늄 엣칭부산물을 첨가한 CPE 고무재료의 난연성 및 내열성 연구 (Study on the Flame Retardation and Thermal Resistance for CPE Rubber Material Added Etching By-product of Aluminum)

  • 김경환;이창섭
    • 대한화학회지
    • /
    • 제45권4호
    • /
    • pp.341-350
    • /
    • 2001
  • 자동차 Oil cooler용 호스를 구성하는 클로로폴리에틸렌(CPE) 고무재료의 내열 및 난연성을 향상시키기 위하여 수산화알루미늄을 내열 및 난연제로 제조한 배합고무의 가황틀성, 물리적 성질, 내열성, 난연성을 조사하였으며, 실험결과로부터 고무와 난연제의 최적배합조건을 도출하였다. 고무시편을 제조하는데 사용된 고무재료는 화학적 내식성과 내한성이 우수하면서도 가격이 저렴한 클로로폴리에틸렌 고무를 사용하였으며, 내열 및 난연제로서는 알루미늄 표면 처리과정에서 발생되는 에칭부산물을 분쇄와 정제를 거쳐 가공한 수산화알루미늄을 사용하였고, 분말은 XRD(X-ray diffraction), PSA(Particle Size Analysis), SEM(Scanning Electron Microscopy) 및 ICP-AES(Inductively Coupled Plasma-Atomic Emission Spectroscopy)로 입자의 상, 크기, 분포, 형태 및 성분을 분석한 후 CPE 고무재료와 0∼80 phr범위에서 훈련하였다. CPE배합 고무의 경도, 인장강도, 신장율, 인장응력 및 열적특성을 분석한 결과, 고무재료규격을 초과하지 않는 범위 내에서 최대의 내열 및 난연효과를 주는 수산화알루미늄의 첨가량은 40 phr로 나타났으며, 이 배합비에서 클로로폴리에틸렌의 난연성은 3배 향상되었다.

  • PDF

해빈 단면의 지형변화 모의를 위한 Delft3D 내의 표사이동 관련 매개변수의 민감도 분석 (Sensitivity Analysis of Sediment Transport Scaling Factors on Cross-Shore Beach Profile Changes using Deflt3D)

  • 양정아;손상영
    • 한국해안·해양공학회논문집
    • /
    • 제31권6호
    • /
    • pp.493-500
    • /
    • 2019
  • 본 연구에서는 강원도 맹방해변을 대상으로 Delft3D 지형변화모듈 내의 표사이동 관련 매개변수(fBED, fBEDW, fSUSW)가 지형변화 모의 결과에 미치는 영향을 검토하였다. 맹방해변 해역에서 2018년도에 관측한 1년 간의 파랑자료를 외력으로 적용하고, 동년도 1월과 10월에 관측한 수심자료는 각각 초기 지형자료와 년간 지형변화 자료로 사용하였다. 모델의 지형변화 모의성능은 계산영역 내의 임의의 한 단면을 연안역과 외해역 구간으로 구분하고, 각 영역에 대해 Brier Skill Score 지표에 근거하여 평가하였다. 그 결과 fBED 변수가 지형변화 모의 결과에 미치는 영향은 미약하다는 것을 알 수 있었다. fBEDW와 fSUSW 변수는 그 값이 0.5 이하일 때는 연안역에 대해 좋은 모의 성능을 보이고, 반대의 경우에는 외해역에 대해 좋은 성능을 보이는 것으로 나타났다. 실험조건 중 연안역에 대해 가장 좋은 성능을 보인 변수 조합은 fBED = 1.0, fBEDW = 1.0, fSUSW = 0.1이고, 외해역에 대해서는 fBED = 1.0, fBEDW = 1.0, fSUSW = 0.5이었다. 그러나, 이 조합은 맹방해변 2018년도 자료에 근거하여 산출된 값이므로, 타해역에 적용할 때는 주의가 필요할 것으로 판단된다.

Taxol Produced from Endophytic Fungi Induces Apoptosis in Human Breast, Cervical and Ovarian Cancer Cells

  • Wang, Xin;Wang, Chao;Sun, Yu-Ting;Sun, Chuan-Zhen;Zhang, Yue;Wang, Xiao-Hua;Zhao, Kai
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제16권1호
    • /
    • pp.125-131
    • /
    • 2015
  • Currently, taxol is mainly extracted from the bark of yews; however, this method can not meet its increasing demand on the market because yews grow very slowly and are a rare and endangered species belonging to first-level conservation plants. Recently, increasing efforts have been made to develop alternative means of taxol production; microbe fermentation would be a very promising method to increase the production scale of taxol. To determine the activities of the taxol extracted from endophytic fungus N. sylviforme HDFS4-26 in inhibiting the growth and causing the apoptosis of cancer cells, on comparison with the taxol extracted from the bark of yew, we used cellular morphology, cell counting kit (CCK-8) assay, staining (HO33258/PI and Giemsa), DNA agarose gel electrophoresis and flow cytometry (FCM) analyses to determine the apoptosis status of breast cancer MCF-7 cells, cervical cancer HeLa cells and ovarian cancer HO8910 cells. Our results showed that the fungal taxol inhibited the growth of MCF-7, HeLa and HO8910 cells in a dose-and time-dependent manner. IC50 values of fungal taxol for HeLa, MCF-7 and HO8910 cells were $0.1-1.0{\mu}g/ml$, $0.001-0.01{\mu}g/ml$ and $0.01-0.1{\mu}g/ml$, respectively. The fungal taxol induced these tumor cells to undergo apoptosis with typical apoptotic characteristics, including morphological changes for chromatin condensation, chromatin crescent formation, nucleus fragmentation, apoptotic body formation and G2/M cell cycle arrest. The fungal taxol at the $0.01-1.0{\mu}g/ml$ had significant effects of inducing apoptosis between 24-48 h, which was the same as that of taxol extracted from yews. This study offers important information and a new resource for the production of an important anticancer drug by endofungus fermentation.

버섯 학술 용어 해설 (Explanation of mushroom academic terminology)

  • 이재성;성재모;김양섭;채정기;유영복;유승헌;차재순;이현숙;이재동;이종수;박원철;구창덕;석순자;김용갑;차병진;장현유
    • 한국버섯학회지
    • /
    • 제4권4호
    • /
    • pp.144-213
    • /
    • 2006
  • The mushroom production reached to 1000 billion won in monetary value in Korea. We, however, do not have systematic terminology dictionary published yet. Recently new varieties of medicinal mushrooms in addition to culinary mushrooms are being introduced steadily through out the world. This makes the necessity of coordinated and consistent arrangement of terms involved in culture, cultivation and physiological aspects of mushrooms. Various components in relation to the medicinal and physiological functionality also poses ambiguity in terminology along with the terms used in breeding and genetic researches. Moreover, some of the scientific terms are being used erroneously. In order to help mushroom cultivators, students, and mushroom business personnel in understanding the terms on mushroom science and technology we intended to collect and organize all the terms related to mushroom morphology and cultivation, poison and medicinal functionality, processing and utilization, and so on. Thirteen professionals from each field participated in this project. The fields included here are : 1) Genetics and breeding of mushrooms, 2) Cultivation and physiology of mushrooms, 3) Taxonomy and ecology of mushrooms, 4) Processing and functional components, 5) Blight and insects of mushrooms.

  • PDF

UAE 내 철도프로젝트 수행을 위한 사막 사구의 지형학적 특성 연구 (Geo-Morphological Study of Sand Dune for Railway Project in UAE)

  • 문준식;김재영;이승복
    • 한국지반공학회논문집
    • /
    • 제28권9호
    • /
    • pp.17-22
    • /
    • 2012
  • 초대형 사구지역 내 철도공사를 위한 대단위 토공작업을 수행하는 경우, 공사 중 및 공사 후 모래바람에 의한 철도선로의 침식 등으로 인해 철도운행에 큰 지장을 초래할 수 있기 때문에 모래바람에 의한 철도노선 내 모래퇴적 방지공의 계획수립이 매우 중요하다. 효과적인 모래퇴적 방지공을 위해서는 적절한 토공설계뿐만 아니라 펜스 시스템과 같은 직접적 모래바람 억제방법 등에 대한 통합적이고 신중한 고려가 필요하다. 하지만, 현재까지 사용된 여러 방법들을 조사해 본 바에 의하면 모래사막 내 철도건설 시 가장 일반적이고 효과적인 모래퇴적 방지공은 없으며, 모래사막의 사구의 지형학적 연구를 토대로 철도선로 및 모래바람으로부터의 철도선로 보호 구조물 등에 대한 철저한 유지보수 계획의 수립이 더 효과적이고 경제적일 것으로 판단되었다. 본 연구에서는 UAE에서 수행되는 프로젝트 지역 내 사구지역의 대단위 및 특정지역 지형에 대한 조사, 분석을 수행하고, 문헌고찰, 항공사진, 위성사진, 현장조사 등을 통해 프로젝트 지역 내 사구의 이동경로, 이동속도를 추정하여 모래바람에 의한 철도선로 침식방지 구조물의 설계 및 유지 보수 계획 수립에 기여하는 것에 그 목적을 두었다.