• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.51-63
• /
• 2011

Surface of fine-size exposed aggregate portland cement concrete pavements(FS-EAPCC) is consist by exposed coarse aggregate to remove upper 2~3mm mortar of concrete slabs. Advantages of FS-EAPCC are maintaining low-noise and adequate skid-resistance level during the performance period. However, FS-EAPCC is required rational management criteria for field application, since it is early stage for application. Design construction and quality control criteria of FS-EAPCC was temporary laboratory tests which including optimum mix and exposing method, selection of adequate aggregate, resistance against, environmental loading and etc. However, these criteria need to be validated base on field application. In this study, experimental constructions were performed and construction procedure and quality control criteria were suggested based on the performance of the FS-EAPCC.

• Journal of Korean language education
• /
• v.29 no.2
• /
• pp.73-100
• /
• 2018

The purpose of this study is to investigate learner-learner dialogue during speaking tasks. In the Korean language classroom, conversation between learners is an important activity as speaking practice. However, learner dialogue is also a tool to enable learners to collaboratively conduct various cognitive activities in the classroom. In previous research, it was unfolded that through learner-learner dialogue, learners can solve second-language related problems and set a goal to carry out tasks. Therefore, this study analyzed learner-learner dialogue to investigate what kinds of cognitive activities are activated during the role-play task. As a result, the learners collaboratively generated and monitored language and content for role play. Also, in order to accomplish tasks more successfully, learners shared the same understanding about the goal of the task, and tried to manage the task procedure. Through learner-learner dialogue, learners can participate in cognitive activities such as content, language construction, and task management voluntarily without the help from teachers. This means that learner-learner dialogue can be an activity to support language learning tasks. Also, it can make learners actively involved in learning and by sharing resources with each other. It is also important that learners can experience language use that participates in real-world communication activities, such as learning in the classroom and collaborating with peer learners. This study is an exploratory study for a basic understanding of learner's conversation as a cognitive activity, and the scope of the study is limited to clarifying contents of learner-learner dialogue as a cognitive activity in speaking tasks. Based on the findings of this study, future research should be conducted on the function of learner-learner dialogue as a cognitive activity in Korean language learning and its role in the classroom of Korean language education.

• The Journal of Korean Association of Computer Education
• /
• v.20 no.6
• /
• pp.95-104
• /
• 2017

The damage caused by information spill, forgery, falsification, and deletion by cyber infringement in educational institutions and universities is very large. In this study, we analyzed the types, causes, and problems of cyber infringement in educational administrative institutions and universities. As a result, administrative, physical and technical information protection activities were weak. In this paper, we propose a security enhancement method for each domain by dividing them into Internet zone, network-neutral zone (DMZ: Demilitarized Zone), general server zone, internal server zone (Server Farm), and user zone so that these vulnerabilities can be easily identified, supplemented or security enhanced. In addition, we have proposed a method to apply security information system architecture and information protection technology correctly for educational administration institutions and universities. This study is meaningful not to provide conceptual guidance but to suggest specific action and procedure oriented security management plan.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.29 no.3
• /
• pp.41-61
• /
• 2004

The purpose of this paper is to construct $\ulcorner$CIDEAR(Cross Impact-DEA-AR)$\lrcorner$ model which evaluates proposed R&D projects considering cross impact among them and selects proper projects to utilize resources efficiently as well as to maximize efficacy of investments. For this purpose, $\ulcorner$CIDEAR$\lrcorner$ model is designed as the following six steps. $\ulcorner$Decision Theory Evaluation Model$\lrcorner$ is for setting and selecting the evaluation items according to the structured procedure of evaluation system. The priority of items is decided at $\ulcorner$AR Decision Model$\lrcorner$$\ulcorner$Cross Impact Estimation Model$\lrcorner$ is for computing the final probability of success and the result is used to revise the evaluation results of $\ulcorner$Decision Theory Evaluation Model$\lrcorner$. $\ulcorner$Resource Performance Analysis Model$\lrcorner$ classifies the proposed R&D projects on the basis of required resources and expected performance. Consequently, the possibility of bias of project selection can be prevented. $\ulcorner$Priority Oder Decision Model$\lrcorner$ is for computing the efficacy of proposed projects. Finally, $\ulcorner$Efficacy-Efficiency Cause Analysis Model$\lrcorner$ analyzes the structure of efficacy and efficiency of the projects. The major findings and significances of this study are summarized as follows: (1) $\ulcorner$CIDEAR$\lrcorner$ model can deal with the affairs of R&D projects having the characteristics of mutual independence as well as mutual dependence in the point of efficacy and efficiency. Hence, it is possible to evaluate and select R&D projects more accurately. (2) It can be possible to raise the possibility of projects success. R&D manager can use the information for project management because the efficacy-efficiency structure of selected projects can be analyzed. (3) We proved the usefulness of the constructed $\ulcorner$CIDEAR$\lrcorner$ model using an case about twenty-one R&D projects of a leading company of electronic industry in Korea.

• Tunnel and Underground Space
• /
• v.28 no.4
• /
• pp.293-303
• /
• 2018

Monitoring is the act of collecting and analyzing accurate engineering information using various methods and instruments. The purposes of the monitoring are design verification, construction management, quality control, safety management, and diagnose of structure etc.. The diagnose evaluation of the geotechnical structures corresponds to the confirmation of the structural performance. It is aimed to judge the soundness of geotechnical structures considering the degree of damage due to the environmental change and elapsed time. Recently, microseismicity, which is widely known in Korea, can be used for safety management and diagnoses of structure as it detects the micro-damage without disturbance of the structure. This report provides guideline on the procedure for assessing an underground oil storage cavern using microseismic monitoring techniques. Guidelines cover the selection of monitoring systems, sensor array, sensor installation and operation of systems, and interpretation.

• Journal of Korean Society on Water Environment
• /
• v.22 no.6
• /
• pp.982-990
• /
• 2006

Generally CSOs (Combined Sewer Overflows) are regarded as one of the most serious nonpoint pollution source in the urban watershed, Particularly, the water quality of the Oncheon stream is seriously affected by CSOs because the capacity of interception sewer system connected to the Suyoung wastewater treatment plant is too small to intercept most storm water discharges. The objective of this study is to evaluate the effect of nonpoint source on an urban stream with regards to combined sewer system and separate sewer system using GIS (Geographic Information System) and SWMM (Storm Water Management Model), and to provide an insight for the management of urban stream water quality. In order to consider the effect of CSOs on the receiving water quality, the flow divider element in SWMM was applied. The model calibration and verification were performed by the measured data of quantity and quality on the Oncheon stream. The quantity data acquired from the Suyoung wastewater treatment plant were also used for this procedure. In case of separate sewer system, the modeling results showed the increased tendency in streamflow compared with the combined system in dry weather, In addition, the water quality is remarkably improved in rainfall events at the separate condition. The results imply that the construction of separate sewer system should be taken into first consideration to restore the quality and quantity of water in urban streams.

• Journal of the Korean Society for information Management
• /
• v.34 no.1
• /
• pp.341-371
• /
• 2017

Recently, the web service environment has changed from document-centered to data-oriented focus, and the Linked Open Data (LOD) exists at the core of the new environment. Specific procedures and methods were examined to build the LOD of records information in accordance with this trend. With the service sustainability of small-scale archive in consideration, an exemplification on LOD building process by utilizing open source software was developed in this paper. To this end, a 5-step service framework for LOD construction was proposed and applied to a collection of diary records from 'Human and Memory Archive'. Proof of Concept (POC) utilizing open source softwares, Protege and Apache Jena Fuseki, was conducted according to the proposed 5 step framework. After establishing the LOD of record information by utilizing the open source software, the connection with external LOD through interlinking and SPARQL search has been successfully performed. In addition, archives' considerations for LOD construction, including improvement on the quality of content information, the role of the archivist, were suggested based on the understanding obtained through the LOD construction process of records information.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.8
• /
• pp.657-664
• /
• 2013

The flight loads analysis was carried out on the aircraft with high aspect ratio flexible wings by using commercial software MSC/NASTRAN. The aerodynamic model for flight loads analysis was corrected, compared with results of the wind tunnel test. And in-house program was developed for pre and post works. In-house program enabling management of much data automatically consists of three modules: 'Construction of the mass distributed model', 'Selection of critical load cases', 'Generation of external loads for structural design'. By utilizing these techniques and programs, the procedure of flight loads analysis was established for effective development of an aircraft.

• Industrial Engineering and Management Systems
• /
• v.14 no.1
• /
• pp.73-87
• /
• 2015

The development of a practical technology intelligence system requires a knowledge base that structures the core information and its relationship distilled from large volumes of technical data. Previous studies have mainly focused on the methodological approaches for technology opportunities, while little attention has been paid to constructing a practical knowledge base. Therefore, this study proposes a procedure to construct a function-based knowledge base for technology intelligence. We define the product-function-technology relationship and subsequently present the detailed steps for the knowledge base construction. The knowledge base, which is constructed analyzing 1110582 patents between 2009 and 2013 from the United States Patent and Trademark Office database, contains the functional knowledge of products and technologies and the relationship between products and technologies. This study is the first attempt to develop a large-scale knowledge base using the concept of function and has the ability to serve as a basis not only for furthering technology opportunity analysis methods but also for developing practical technology intelligence systems.

• Journal of Korean Institute of Industrial Engineers
• /
• v.43 no.3
• /
• pp.229-237
• /
• 2017

Presented in this paper is a case study of constructing a smart factory for aircraft parts. The construction procedure involves four phases. First of all, its management goals are set, and layout design and simulation are carried out in the conceptual design phase. In the detail design phase, operating scenarios for each module are written out, and probable risks are analyzed by expert groups, and then requirements for developing equipments and subsystems are determined with consideration for element technologies and their integration schemes into the smart factory. In the fabrication and installation phase, system development, equipment fabrication and installation are proceeded in a separate manner, and then integrated together subsequently. In the operation and improvement phase, the factory is stabilized, sophisticated and improved constantly during real operation.