• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.2
• /
• pp.37-43
• /
• 2017

Purpose Recently PET/CT image's attenuation correction is used CTAC(Computed Tomgraphy Attenuation Correction). it can quantitative evaluation by SUV(Standard Uptake Value). This study's purpose is to evaluate SUV and to find proper CT kernel using CTAC with applied various CT kernel to PET/CT construction. Materials and Methods Biograph mCT 64 was used for the equipment. We were performed on 20 patients who had examed at our hospital from february through March 2017. Using NEMA IEC Body Phantom, The data was reconstructed PET/CT images with CTAC appiled various CT kernel. ANOVA was used to evaluated the significant difference in the result. Results The result of measuring the radioactivity concentration of Phantom was B45F 96% and B80F 6.58% against B08F CT kernel, each respectively. the SUVmax increased to B45F 0.86% and B80F 6.54% against B08F CT kernel, In case of patient's parts data, the Lung SUVmax increased to B45F 1.6% and B80F 6.6%, Liver SUVmax increased to B45F 0.7% and B80F 4.7%, and Bone SUVmax increased to B45F 1.3% and B80F 6.2%, respectively. As for parts of patient's about Standard Deviation(SD), the Lung SD increased to B45F 4.2% and B80F 15.4%, Liver SD increased to B45F 2.1% and B80F 11%, and Bone SD increased to B45F 2.3% and B80F 14.7%, respectively. There was no significant difference discovered in three CT kernel (P >.05). Conclusion When using increased noise CT kernel for PET/CT reconstruction, It tends to change both SUVmax and SD in ROI(region of interest), Due to the increase the CT kernel number, Sharp noise increased in ROI. so SUVmax and SD were highly measured, but there was no statistically significant difference. Therefore Using CT kernel of low variation of SD occur less variation of SUV.

• Journal of the Korean Geographical Society
• /
• v.43 no.4
• /
• pp.620-637
• /
• 2008

$Che{\breve{o}}n$ (提堰) refers to the irrigation facilities used to provide water to the land on which rice is farmed. As the maintenance of $Che{\breve{o}}n$ required great amounts of capital, labor, and technology, the construction and maintenance of such facilities was controlled by the government. $Che{\breve{o}}n$ was perceived as being of particular importance during the $Che{\breve{o}}n$ era, which adopted agriculture as the basis of state management. Therefore, the management of $Che{\breve{o}}n$ was considered to be one of the main state policies. This is why $Che{\breve{o}}n$-related records can often be found in the historical documents written during the $Che{\breve{o}}n$ era. As such historical documents in the form of Jiriji (地理誌, geographical descriptions) include detailed descriptions of the number, size, and location of $Che{\breve{o}}n$ in individual counties($kunby{\breve{o}}n$), these help to conduct comprehensive analysis of the state of $Che{\breve{o}}n$ during the $Che{\breve{o}}n$ era. Based on these facts, this study attempts to establish a database of the $Che{\breve{o}}n$-related contents included in the <$Y{\breve{o}}jitos{\breve{o}}$(與地圖書)> published during the latter period of $Che{\breve{o}}n$, and using the established database, to identify the regional characteristics of $Che{\breve{o}}n$. More precisely, by analyzing the state of the distribution of $Che{\breve{o}}n$ at the national level, an effort was made to review the regional characteristics of $Che{\breve{o}}n$ in terms of their distribution and of the natural geographical conditions found in the locales where $Che{\breve{o}}n$ were located, as well as of the interrelation between such $Che{\breve{o}}n$ and socioeconomic factors such as the scale of the population and the size of the area under cultivation. Other factors which were delved into included matters related to the size of $Che{\breve{o}}n$ such as their perimeter, length, and scale of the area which they irrigated, the characteristics of the locales where $Che{\breve{o}}n$ were located, and the regional differences in the characteristics of $Che{\breve{o}}n$.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.2
• /
• pp.5-15
• /
• 2020

The liquefaction phenomenon that occurred during the Pohang earthquake (M_L=5.4) brought new awareness to the people about the risk of liquefaction caused by the earthquake. Liquefaction hazard maps with 2 km grid made in 2014 used more than 100,000 borehole data for the whole country, and regions without soil investigation data were produced using interpolation. In the mapping of macro liquefaction hazard for the whole country, the site amplification effect and the ground water level 0 m were considered. Recently, the Ministry of Public Administration and Security (2018) published a new site classification method and amplification coefficient of the common standard for seismic design. Therefore, it is necessary to rewrite the liquefaction hazard map reflecting the revised amplification coefficient. In this study, the results of site classification according to the average shear wave velocity in soils before and after revision were compared in the whole country. Also, liquefaction assessment results were compared in Gangseo-gu, Busan. At this time, two ground accelerations corresponding to the 500 and 1,000 years of return period and two ground water table, 5 m for the average condition and 0 m the extreme condition were applied. In the drawing of liquefaction hazard map, a 500 m grid was applied to secure a resolution higher than the previous 2 km grid. As a result, the ground conditions that were classified as S_C and S_D grounds based on the existing site classification standard were reclassified as S₂, S₃, and S₄ through the revised site classification standard. Also, the result of the Liquefaction assessments with a return period of 500 years and 1,000 years resulted in a relatively overestimation of the LPI applied with the ground amplification factor before revision. And the results of this study have a great influence on the liquefaction assessment, which is the basis of the creation of the regional liquefaction hazard map using the amplification factor.

• Journal of Intelligence and Information Systems
• /
• v.17 no.2
• /
• pp.39-60
• /
• 2011

Since the introduction of web 2.0 technology, social network service has been recognized as the foundation of an important future information technology. The advent of web 2.0 has led to the change of content creators. In the existing web, content creators are service providers, whereas they have changed into service users in the recent web. Users share experiences with other users improving contents quality, thereby it has increased the importance of social network. As a result, diverse forms of social network service have been emerged from relations and experiences of users. Social network is a network to construct and express social relations among people who share interests and activities. Today's social network service has not merely confined itself to showing user interactions, but it has also developed into a level in which content generation and evaluation are interacting with each other. As the volume of contents generated from social network service and the number of connections between users have drastically increased, the social network extraction method becomes more complicated. Consequently the following problems for the social network extraction arise. First problem lies in insufficiency of representational power of object in the social network. Second problem is incapability of expressional power in the diverse connections among users. Third problem is the difficulty of creating dynamic change in the social network due to change in user interests. And lastly, lack of method capable of integrating and processing data efficiently in the heterogeneous distributed computing environment. The first and last problems can be solved by using FOAF, a tool for describing ontology-based user profiles for construction of social network. However, solving second and third problems require a novel technology to reflect dynamic change of user interests and relations. In this paper, we propose a novel method to overcome the above problems of existing social network extraction method by applying FOAF (a tool for describing user profiles) and RSS (a literary web work publishing mechanism) to OLAP system in order to dynamically innovate and manage FOAF. We employed data interoperability which is an important characteristic of FOAF in this paper. Next we used RSS to reflect such changes as time flow and user interests. RSS, a tool for literary web work, provides standard vocabulary for distribution at web sites and contents in the form of RDF/XML. In this paper, we collect personal information and relations of users by utilizing FOAF. We also collect user contents by utilizing RSS. Finally, collected data is inserted into the database by star schema. The system we proposed in this paper generates OLAP cube using data in the database. 'Dynamic FOAF Management Algorithm' processes generated OLAP cube. Dynamic FOAF Management Algorithm consists of two functions: one is find_id_interest() and the other is find_relation (). Find_id_interest() is used to extract user interests during the input period, and find-relation() extracts users matching user interests. Finally, the proposed system reconstructs FOAF by reflecting extracted relationships and interests of users. For the justification of the suggested idea, we showed the implemented result together with its analysis. We used C# language and MS-SQL database, and input FOAF and RSS as data collected from livejournal.com. The implemented result shows that foaf : interest of users has reached an average of 19 percent increase for four weeks. In proportion to the increased foaf : interest change, the number of foaf : knows of users has grown an average of 9 percent for four weeks. As we use FOAF and RSS as basic data which have a wide support in web 2.0 and social network service, we have a definite advantage in utilizing user data distributed in the diverse web sites and services regardless of language and types of computer. By using suggested method in this paper, we can provide better services coping with the rapid change of user interests with the automatic application of FOAF.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.1 no.1
• /
• pp.21-32
• /
• 1981

Recent trends in design standards development in some European countries and U.S.A. have encouraged the use of probabilistic limit sate design concepts. Reliability based design criteria such as LSD, LRFD, PBLSD, adopted in those advanced countries have the potentials that they afford for symplifying the design process and placing it on a consistent reliability bases for various construction materials. A reliability based design criteria for RC flexural members are proposed in this study. Lind-Hasofer's invariant second-moment reliability theory is used in the derivation of an algorithmic reliability analysis method as well as an iterative determination of load and resistance factors. In addition, Cornell's Mean First-Order Second Moment Method is employed as a practical tool for the approximate reliability analysis and the derivation of design criteria. Uncertainty measures for flexural resistance and load effects are based on the Ellingwood's approach for the evaluation of uncertainties of loads and resistances. The implied relative safety levels of RC flexural members designed by the strength design provisions of the current standard code were evaluated using the second moment reliability analysis method proposed in this study. And then, resistance and load factors corresponding to the target reliability index(${\beta}=4$) which is considered to be appropriate level of reliability considering our practices are calculated by using the proposed methods. These reliability based factors were compared to those specified by our current ultimate strength design provisions. It was found that the reliability levels of flexural members designed by current code are not appropriate, and the code specified resistance and load factors were considerably different from the reliability based resistance and load factors proposed in this study.

• Proceedings of the CALSEC Conference
• /
• 2002.01a
• /
• pp.86-106
• /
• 2002

Informatization is a process that corporation's external environmental factors and internal environmental factors influence as complex. is a phenomenon that appears via this process. To evaluate that informatization was propeled well or informatization level is high can be dangerous work extremely by only once-over-lightly some factors, organization information ability is superior or infrastructure is constructed well. Therefore, an evaluation for industrial information systems that consider corporation's external environment and internal environment configurationally and objective estimation through this is required in national dimension. This research sorted types of business using types of business classification of 2001 EIII(Evaluation Indices of Industrial Informatization) laying stress on corporation's product and product production process for reflecting various industrial classification. And we are dividing whole our country corporations by manufacture industry, the construction industry, distribution industry, service industry, banking industry 5 types of business. To see such classed types industry classification from consistent viewpoint, we saw them within new framework, purchase, operation, physical distribution, marketing and sale. service etc. laying stress on primary businesses except support businesses of planning, financial management etc. To draw special quality of business center from primary business of each types of business, we draw industry classification Key Capability that centers when plans corporation's corporate strategy and information strategy. And we deducted industrial classification key production business connected with industry classification Key Capability. After drawing an evaluation items for industrial information systems in informatization analysis viewpoint laying stress on drawn businesses. Finally we did Case Study by making out an evaluation for industrial information systems questionnaire that considers special quality of manufacturing industry. Through EIII that consider the industrial classification, we could know that it explains the corporation's purchase, production, distribution in general and detail.

• Journal of Wetlands Research
• /
• v.19 no.1
• /
• pp.30-36
• /
• 2017

SS(Suspended Solid) concentration by soil erosion into river at normal and flood season should be measured. However, to present the variation of SS due to various development project such as EIA(Environmental Impact Assessment), River Master Plan, and so on, it is necessary to estimate not measure SS, but there are not exist how to estimate SS. In the present study, therefore, we propose the hydrologic method of estimating SS concentration using the results of particular frequency flood discharge and sediment discharge by RUSLE method. SS consists of silty and clay soil and colloid particle etc. However, in the present study, silty and clay soils of sediment discharge except send set up SS standards. The flow discharge to estimate SS concentration are 1~2 years for normal season, 30~100 years for flood season. Meanwhile, analysis software for probable rainfall uses Fard2006, probable rainfalls under 2-year frequency are estimated using rainfall data and frequency factor of Gumbel distribution. The results of estimating SS concentration using runoff volume by sediment and flow discharges of silty and cray soils as above method show that reliable level of SS concentration is considered in predevelopment of natural condition and under development of barren condition. Especially, SS concentration takes notice that the value of sediment discharge makes a huge difference according to channel slope, it was confirmed that the value obtained by dividing the SS concentration by the channel slope is relatively constant even though the topographical factors are different. Therefore, if the present study will be proceeded for various watersheds, it will be developed as estimation method of SS concentration.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.110-127
• /
• 2020

The term "conserved remains" refers to cultural remains that are preserved in accordance with the valuation of buried cultural properties when important remains are recognized in rescue excavations during construction work. South Korea's rapid economic growth and ensuing land development over the past few decades compelled a sharp increase in the number of rescue excavation cases, and, naturally, of conserved remains. Today, an increasingly large number of conserved remains have raised issues, including those concerning land expropriation as well as the management and utilization of such remains, but no clear solutions have been proposed. This study attempts to propose plans for improvement based mainly on the recognition of institutional issues rather than technical issues related to the conservation of cultural remains. This is because the identification and review of institutional deficiencies must be prioritized in order to efficiently manage conserved remains with limited resources and manpower. Among many possible proposals to demand improvement of conservation policies, one that must first be examined under the current system is the rapid transition, or review thereof, of "conserved remains" to "designated cultural properties." Unlike designated cultural properties, conserved remains are merely a temporary means of conservation, because they lack regulations for follow-ups subsequent to preliminary measures. Naturally, deferring the definition of relics as "conserved remains" for extended periods causes numerous problems. Measures to resolve such problems may include establishing a legal system to manage conserved remains at a level similar to designated cultural properties or seeking ways to improve management under the current system. This study focuses on areas where institutional improvement for conserved remains is possible by methods other than through the rapid transition to designated cultural properties and presents several proposals. Currently, conservation measures are divided into three categories: on-site conservation, relocation conservation, and record conservation. This study reclassifies these categories from three into four categories. On-site conservation includes only two categories: conserved remains and the newly-proposed soil-covered remains. Two remaining categories, the relocation conservation remains and the record conservation remains, are presented as classifications in which development projects are possible, and they are presented as alternative conservation types that contrast with on-site conservation. Unlike conserved remains, soil-covered conservation presented as a new category in which development projects are possible.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.5
• /
• pp.492-501
• /
• 2007

Coastal disasters have become one of the most important issues in every coastal country. In Korea, coastal disasters such as storm surge, sea level rise and extreme weather have placed many coastal regions in danger of being exposed or damaged during subsequent storms and gradual shoreline retreat. A storm surge is an onshore gush of water associated with a tow pressure weather system, typically in typhoon season. However, it is very difficult to predict storm surge height and inundation due to the irregularity of the course and intensity of a typhoon. To provide a new scheme of typhoon damage prediction model, the scenario which changes the central pressure, the maximum wind radius, the track and the proceeding speed by corresponding previous typhoon database, was composed. The virtual typhoon scenario database was constructed with individual scenario simulation and evaluation, in which it extracted the result from the scenario database of information of the hereafter typhoon and information due to climate change. This virtual typhoon scenario database will apply damage prediction information about a typhoon. This study performed construction and analysis of the simulation system with the storm surge/coastal inundation model at Masan coastal areas, and applied method for predicting using the scenario of the storm surge.

• Economic and Environmental Geology
• /
• v.49 no.2
• /
• pp.105-120
• /
• 2016

Most of riverside in Korea, in case of application of water curtain cultivation (WCC) technique, has been inveterately suffering from the gradual drawdown of groundwater level and related shortage of water resources during the WCC peak time. We believe that the water resources issue in these riverside areas can be effectively solved when the interaction between groundwater and nearby surface water is well understood. To investigate the connection between stream and ground water, and the influence of stream water on the nearby aquifer, this study examined the water temperature and oxygen and hydrogen stable isotopic compositions. The study area is well-known strawberry field applying the WCC technique in Sangdae-ri, Gadeok-myon, Cheongju City, and the sampling was done from February 2012 through June 2014 for stream and ground water. Some groundwater wells near stream showed big temporal variations in water temperature, and their oxygen and hydrogen stable isotopes showed similar compositions to those of adjacent stream water. This indicates that the influence of stream water is highly reflected in the stable isotopic composition of groundwater. Four cross-sectional lines from stream to hillside were established in the study area to determine the spatial differences in water quality of wells. At the late stage of WCC in February to March, groundwater of wells in line with short cross-sectional length showed the narrow range of isotopic compositions; however, those in the long cross-sectional line showed a wide compositional range. It was shown that the influence of the stream water at the late WCC stage have reached to the distance of 160 to 165 m from stream line, which is equivalent to the whole length and one-third point in each short and long cross-sectional line, respectively. Therefore, the wide compositional range in the long cross-sectional lines was not only due to the influence of stream water, but apparently resulted from the change of relative impact of each groundwater supplying from two or more aquifers. In view of stable isotopic compositions, there seems to be three different aquifers in this study area, which is competing for dominance of water quality in wells at each period of WCC.