• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.458-460
• /
• 2021

The provision and application of public safety network in Korea is still insufficient for security response to the mobile app of public safety network in the stages of development, initial construction, demonstration, and initial service. The available terminals on the Disaster Safety Network (PS-LTE) are open, Android-based, dedicated terminals that potentially have vulnerabilities that can be used for a variety of mobile malware, requiring preemptive responses similar to FirstNet Certified in U.S and Google's Google Play Protect. In this paper, before listing the application service app on the public safety network mobile app store, we construct a data set for malicious and normal apps, extract features, select the most effective AI model, perform static and dynamic analysis, and analyze Based on the result, if it is not a malicious app, it is suggested to list it in the App Store. As it becomes essential to provide a service that blocks malicious behavior app listing in advance, it is essential to provide authorized authentication to minimize the security blind spot of the public safety network, and to provide certified apps for disaster safety and application service support. The safety of the public safety network can be secured.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.806-814
• /
• 2023

Purpose: According to the Occupational Safety and Health Act of the Ministry of Employment and Labor, in order to prevent industrial accidents, the right to stop work must be exercised in the event of an imminent danger. This study conducted a fact-finding survey on whether employers fulfilled the right to suspend work in the workplace when an imminent danger, such as a typhoon, was encountered. Method: For two days from August 9 to October, when the impact of Typhoon Khanun No. 6 was significant, it was confirmed by wire whether or not the work suspension was carried out at the workplace, and the subjects of the survey were 1,649 construction sites, 830 manufacturing sites, and 278 other industries, for a total of 2,757 sites. Result: As a result of the fact-finding survey, 56% (1,555 locations) on August 9th and 77% (2,142 locations) on August 10th carried out full or partial work suspension. In particular, on August 10, when the typhoon landed, 40% of all workplaces completely stopped work. Conclusion: Through this study, it was confirmed that the right to suspend work by employers is being used in actual workplaces. In the future, when there is an imminent danger, in addition to the right to suspend work, flexible and telecommuting, working hour adjustments, etc. must be actively used to ensure the safety of workers and protect their lives.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.984-992
• /
• 2023

Purpose: The core problem of this study is that there are no specific noise regulation standards for domestic blasting work. Currently, the domestic blasting work noise regulation standard has not been established separately, and the noise regulation standard of 80 decibels is corrected by 10 decibels to 70 decibels, which is the daily living noise standard. In contrast, many foreign countries have separate noise regulation standards specifically tailored to blasting work. Accordingly, it is intended to present international reasonable blasting noise standards by comparing domestic and foreign blasting work noise regulation standards. Mmethod: This study can be inferred as a comparative analysis of domestic and foreign noise regulation standards. Data on the current noise regulation standards during domestic blasting and noise regulation standards during blasting operations in the United States, the United Kingdom, Australia, Japan, and China are collected and analyzed. Results: According to the study, the noise regulation value during blasting work at domestic construction sites was not separately established, so it was not properly tailored to the specific and characteristics of blasting noise. In the case of overseas, a realistic noise regulation value was established so that a safer, more efficient and eco-friendly blasting method could be applied to the noise regulation value uniformly during blasting work. Conclusion: In this study, it is hoped that noise regulations will be established during reasonable blasting work, as shown in domestic and international comparative studies, and will be widely adopted without interfering with the introduction of efficient, economical, and eco-friendly blasting methods by complying well with blasting safety standards.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.2
• /
• pp.5-18
• /
• 2023

As the development of drones and sensors accelerates, new services and values are created by fusing data acquired from various sensors mounted on drone. However, the construction of spatial information through data fusion is mainly constructed depending on the image, and the quality of data is determined according to the specification and performance of the hardware. In addition, it is difficult to utilize it in the actual field because expensive equipment is required to construct spatial information of high-quality. In this study, super-resolution was performed by applying deep learning to low-resolution images acquired through RGB and THM cameras mounted on a drone, and quantitative evaluation and feature point extraction were performed on the generated high-resolution images. As a result of the experiment, the high-resolution image generated by super-resolution was maintained the characteristics of the original image, and as the resolution was improved, more features could be extracted compared to the original image. Therefore, when generating a high-resolution image by applying a low-resolution image to an super-resolution deep learning model, it is judged to be a new method to construct spatial information of high-quality without being restricted by hardware.

• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.329-338
• /
• 2024

Purpose: This study verified the safety of the improved box-type girder behavior by comparing and evaluating the bending behavior results of a full-scale specimen based on the analytical behavior of the splice element PSC U-shaped girder with integrated tensioning systems. Method: Based on the results of the service and strength limit state design using the bridge design standard(limit state design method), the applied load of a 40m full-scale specimen was calculated and a static loading experiment using the four-point loading method was performed. Result: When the design load, crack load, and ultimate load were applied, the specimen deflection occurred at 97.1%, 98.5%, and 79.0% of the analytical deflection value. When the design load, crack load, and ultimate load were applied, the crack gauge was measured at 0.009~0.035mm, 0.014~0.050mm, and 6.383~5.522mm at each connection. Conclusion: The specimen behaved linear-elastically until the crack load was applied, and after cracks occurred, it showed strainhardening up to the ultimate load, and it was confirmed that the resistance of bending behavior was clearly displayed against the applied load. The cracks in the dry joints were less than 25% of grade B based on the evaluation of facility condition standard. The final residual deformation after removing the ultimate load was 0.114mm, confirming the stable behavior of the segment connection.

• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.369-378
• /
• 2024

Purpose: This study aims to verify structural stability by manufacturing a 40m full-scale specimen composed of a segmental U-shaped PSC girder with integrated tensioning systems and a concrete slab, proceeding dynamic behavior tests, and compare the results of the tests with the results of numerical analysis. Method: Dynamic behavior tests were conducted on a full-scale, undamaged specimen using an impact hammer, and the natural frequency and damping ratio were measured and compared with numerical analysis techniques and the general damping ratio of the facilities. Result: The natural frequency of the numerical analysis model consisting of a girder and slab composite section was calculated to be 2.561Hz, the natural frequency of the full-scale specimen was measured to be 2.670Hz, and the damping ratio was calculated to be 0.42~0.68%. Conclusion: The natural frequency of the full-scale specimen was found to be 4.3% larger than that of the numerical analysis model. Since the masses of the full-scale specimen and the numerical analysis model are the same as 99.97%, it can be derived that the stiffness of the full-scale specimen has secured structural safety and stability. As a result, the dynamic behavior stability of the specimen was verified. The measured damping ratio of 0.42~0.68% was found to be a stable dynamic behavior compared to the PSC structures damping ratio of 0.5~1.0% in the elastic region.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.1
• /
• pp.125-132
• /
• 2024

The purpose of this study is to discover a drone utilization model tailored to local characteristics, propose directions for building a drone demonstration city based on demand surveys for drone activation, and suggest ways to utilize and support a drone application system. First, according to the survey results, there was a high understanding of and necessity for drone demonstration projects, particularly in addressing urban issues, which were deemed to have a significant impact. Second, based on the analysis of priorities and short- and long-term approaches, disaster-related tasks were evaluated as a priority, requiring an approach through medium- to long-term strategies. Third, it was noted that budgetary considerations emerged as the most critical issue during project implementation. Practitioners and experts expressed willingness to actively introduce drone-based technologies into their work when budget and technology were ready. Budgetary constraints were identified as the most significant obstacle to proper implementation, emphasizing the need for resolution. Fourth, the necessity of demand surveys during project development was identified in certain areas. Demand surveys were deemed essential for drone-based demonstration city construction, and a survey indicated that public leadership in this regard was also necessary. Fifth, concerning approaches in specific areas, the field of safety and disaster management was highlighted as the most crucial for application.

• Journal of the Society of Disaster Information
• /
• v.20 no.3
• /
• pp.573-583
• /
• 2024

Purpose: This study predicted the flow of chemical, biological, and radiological materials in chemical, biological, and radiological defense facilities within the base during a chemical, biological, and radiological attack based on the conditions of the facility before the existing improvement, analyzed the flow of pollutants and the human impact of toxic substances, and identified the occurrence of leakage. Method: Assuming that the simple chemical, biological, and radiological defense facility improvement plan, which reflects the characteristics of the building, has been improved to the facility standard, the flow of chemical, biological, and radiological materials in the chemical, biological, and radiological defense facility within the base was predicted in the event of a chemical, biological, and radiological attack under the same conditions, and the flow of contaminants and the impact on occupants by toxic substances were analyzed to determine spatial safety. Result: In the case of Plan 1, it was found that leakage occurred after approximately 250 seconds in spaces where existing flat-panel chemical, biological, and radiological defense facilities were not installed. In the cases of Plans 2 and 3, it was found that leakage occurred in spaces where existing flat-panel chemical, biological, and radiological defense facilities were not installed. Conclusion: n the case of plans 1, 2, and 3, it was found that airtightness was maintained because no leakage occurred in the improved plane. In the case of plan 4, airtightness was not maintained due to leakage in the space where the existing plane simple chemical, biological, and radiological protection facilities were not installed.

• Journal of the Society of Disaster Information
• /
• v.20 no.3
• /
• pp.549-562
• /
• 2024

Purpose: In this study, numerical analysis was conducted to verify the vibration reduction effect of installing vibration barriers under various installation conditions to mitigate train-induced vibrations from the GTX. Method: To identify the factors influencing vibration reduction among the installation conditions, the stiffness ratio of the filling material and the installation depth of the barrier were varied. Result: The study results indicated that using ductile filling materials provided superior vibration reduction compared to hard filling materials. The vibration reduction effect was found to be more significant when the stiffness ratio between the ground and the filling material was closer to zero. Additionally, the deeper the installation depth of the barrier, the better the vibration reduction effect. Conversely, if the barrier was installed too shallowly, vibration at the measurement point was amplified. Conclusion: The optimal installation condition for vibration reduction was found to be a stiffness ratio of 0.08 and an installation depth of 15 meters, resulting in a vibration reduction rate of 60.34% at a measurement point 10 meters away from the vibration source.

• Journal of Korean Society of Forest Science
• /
• v.113 no.3
• /
• pp.339-348
• /
• 2024

Debris flow is a typical type of mountainous sediment disaster that can cause widespread damage to both lives and property, making it essential to understand its behavioral characteristics for effective prevention. In this study, pre- and post-event Light Detection And Ranging(LiDAR) data from the Dosan-ri area in Bonghyeon-myeon, Yeongju-si, Gyeongsangbuk-do, Republic of Korea where debris flows occurred in 2023, were used to calculate the actual affected area and terrain change volume caused by the debris flow. These calculated values were then compared with those derived from the numeric simulation model, Morpho2DH, based on field surveys and laboratory investigation data. Additionally, the model's applicability was assessed by conducting cross-sectional elevation analyses based on the extent of the affected area and comparisons of the results. The findings indicate that the debris flow affected area and terrain change volume estimated by the Morpho2DH model were approximately 152% and 178% higher, respectively, compared to the LiDAR-based results. Pearson correlation analysis of the cross-sectional elevation changes showed a positive correlation, with Pearson Correlation Coefficients(PCC) of at least 0.65