• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.606-609
• /
• 2003

The need of high-rise building is increased, because population is concentrated and the building site is limited in the city. Owing to this request buildings in downtown become more high rise. Therefore, we must develop the design, structure, high technology and materials. The core wall construction is one of the method of construction preferred because it cut down the cost and decrease the schedule. According to research in this study, we found that the selection process of core wall system form is focused on the schedule and cost. the construability is relatively failed to notice. As a result, the problem of construability is happened under the construction, it lead to delay the schedule and increase the cost. The purpose of this study is suggest to decision making process of core wall system form considered improving construction productivity.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.702-707
• /
• 2006

There have been certain extent of material inventory in construction site because of difficulties in ordering by small quantity, strategy of securing future requirements and prevention of delay. However, carrying these inventory entails a financial cost called inventory holding cost and decrease construction productivity, so proper inventory management in construction industry is important for construction efficiency and cost reduction. This study tries to find analytical method of inventory management. It includes ordering decision which decide how much to order and when to order. Setting these strategies including deciding safety inventory, input and ouput variability are able to controled.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.523-528
• /
• 2006

The management of construction materials is one of the important administration factor to perform construction projects. If it is not flexible to supply necessary materials to a workplace at a proper time, some problems such as a construction cost increase, an operation delay, a lowering of work efficiency and etc. could occur during the progress of work. Therefore, tracking the precise location of materials is important and necessary to input materials in the accurate place. Although Location sensing techniques comprise GPS, Active Badge, EasyLing and so forth, there are technical limitations to apply these techniques on construction site. Accordingly, in this paper, we propose the technically feasible method to automatically locate materials on site using recent RFID and wireless network technologies.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.4
• /
• pp.73-83
• /
• 2013

Recently, not only around Korea but also other countries shows a pattern of arising high-rise building construction project which was delayed or aborted during global economic crises and recession. Although the market starts to stretch, It is getting competitive to win a contract in high-rise construction project between contractors due to lack of competitive advantage especially to Korea contractors. To get that, Korean contractors needs lifting equipment plan. But currently, they depend on the empirical methods and that cause schedule delay, not controlled cost management problem. Therefore, this research is to improve the accuracy of Lifting plan by analyzing the current issues of Lifting plan system and deducing the types of failures with planning factors, as well as analyzing the impact on schedule and cost control and safety management by each failure mode. Also, by analyzing detail risk factors per Lifting Equipment with FMEA, to infer the critical risk factor on high-rise construction project.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.3
• /
• pp.12-21
• /
• 2013

Total Project Cost Management System(TPCMS) was introduced with the purpose of increasing the efficiency of cost control for public construction project in 1994. In this paper, general perception of participants of the public construction project on the TPCMS was examined, and the problems in implementing the TPCMS was figured out through expert interviews and survey. Then better ways to implement the system were drawn based on the problems. To effectively manage the cost of public construction project, basically project cost should be estimated accurately in planning stage and managed based on it to have a project complete within the budget. In addition, the cost need to be managed in more systematic ways in terms of data collection and analysis, and the autonomy in managing the project cost given to the project owner needs to be expanded. Most of all, proper budget should be provided to prevent a project from delay through setting the priority of projects and proper budget allocation based on the priority.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.19-21
• /
• 2012

This paper was to investigate the effect of incinerator ash on engineering properties of the high volume blast furnace slag concrete through Mock-up test. Test results revealed that the use of recycled aggregates resulted in increase of slump compared with the OPC concrete. But, the use of recycled aggregates did not affect the results of air contents and chloride contents. The use of recycled aggregates showed shortening of setting time of high volume blast furnace slag concrete. When the recycled aggregate was used, delay in strength development at early age happened with high volume blast furnace slag concrete compared with that of OPC concrete.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.495-499
• /
• 2006

While the use of large scale underground complex space is increasing currently, this research suggests the methodology of servicing advanced service for civilian and constructing active disaster protection system in order to be free from danger problem of underground complex space by applying new ubiquitous technology. Synchronization between virtual space and real space and construction of ubiquitous disaster protection system arc the core technology. Based on RFID, USN technology, usually, user centered spatial information services are presented. it can be convert to disaster protection system on emergency situation without delay. Through these technology. we can ensure the safety of underground space where the floating population is concentrated in, moreover, utilize for infrastructure that presents various civilian services. Then we can satisfy the increasing civilians desire for safety and welfare and finally, it will contribute to construction of productive city and creation of new conceptual market.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.417-422
• /
• 2003

Rockfall mitigation methods have been widely constructed along railway lines but aren't estimated with any economic analysis methods up to now. Therefore, this study applied a benefit-cost analysis to rockfall mitigation method to determine whether it is indeed an economically efficient construction. The Benefits were estimated based on data collected from disaster history, and included three types of benefits that are originated by reduction of train accident, train delay and rockfall removing cost. The costs included both construction cost and the maintenance cost of the selected method. This analysis could clarify the investment effect of rockfall mitigation method that would be built at rockfall prone slope.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.134-135
• /
• 2014

In this study, mock-up test for high strength concrete with ERCO has been carried to analyse the effect of autogenous shrinkage reducing of using ERCO. The following results could be made as the conclusion. Results of EIS were lower than 2.5 and showed good resistance for separation of materials. For the setting time, specimen with ERCO showed delay of setting comparing with Plain. For the autogenous shrinkage, as the generation of saponification, capillary pores inside the concrete were filled by soap and the autogenous shrinkage has been obviously decreased. It could be identified that using ERCO in high strength showed good effect on reducing autogenous shrinkage in high strength concrete.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.12
• /
• pp.95-100
• /
• 2017

In this paper, we propose a zone based ad hoc network construction scheme which support ad hoc path between nodes in local IoT networks consisting of IoT devices with the constrained feature, such as low power, the limited transmission rate and low computing capacity. Recently, the various routing protocols have been studied to support ad hoc networking of local IoT environments. This is, because basis RPL protocol is deigned to be used for the connecting service with Internet through gateway, ad hoc path between nodes in local IoT networks is not supported in basis RPL protocol. Thus, in this paper, the proposed routing scheme provides both ad hoc path and Infra path through gateway, supporting basis RPL protocol simultaneously. Through simulation, we show that the proposed routing scheme with zone based path selection scheme improves the performance of the success rate of end-to-end data transmission and the end-to-end delay, compared to basis RPL protocol.