• 한국구조물진단유지관리공학회 논문집
• /
• 제16권3호
• /
• pp.92-98
• /
• 2012

본 연구는 터널의 유지, 보수, 보강에 필요한 가설공사용 스페이스 트러스 프레임 구조물을 소개한다. 기존 가설공사 시공방식과 장비들의 현황 및 문제점을 분석하고, 터널 설계의 핵심 구성요소를 파악함으로써, 제안된 새로운 가설 시공기술 시스템을 개발하는 과정을 순차적으로 설명한다. 그리고 개발된 가설 시스템을 발주처, 시공사, 터널 이용자 관점에서 사용성 및 경제성을 분석하고, 구조적인 안전성 검토와 최적단면 산정 평가를 상용 유한요소 해석프로그램인 ABAQUS 6.5로 구현하여 본 가설 시스템의 현장적용 기반을 구축한다.

• 한국건설관리학회논문집
• /
• 제8권6호
• /
• pp.150-158
• /
• 2007

지구온난화를 일으키는 주요 온실가스가 이산화탄소임이 공표되고, 이의 배출 감축을 유도하기 위한 국내외적 규제가 강화됨에 따라 국내 건설산업에서도 생산과정에서 배출되는 이산화탄소량을 줄이기 위한 노력이 절실히 요구되고 있다. 이의 일환으로서 본 연구는 심각한 이산화탄소 배출원 중 하나인 건설폐기물에 대해 전과정평가(LCA)를 수행하여 건설폐기물로 인해 배출되는 이산화탄소의 특성을 파악하고, 그 결과를 토대로 건설현장에서 이산화탄소 배출량을 효과적으로 줄일 수 있는 폐기물 관리방안 수립 기준을 제시하고자 하였다. 전과정평가(LCA) 결과, 자재별로는 철근류, 가설자재류, 시멘트류, 레미콘, 콘크리트 제품, 타일 등의 자재가 폐기물로 인한 전체 이산화탄소 배출량 중 95% 정도를 배출하는 것으로 나타났다. 이들 자재의 이산화탄소 배출량이 많은 원인은 폐기물 발생량보다는 자재 생산에 필요한 단위 이산화탄소 발생량이 높기 때문인 것으로 분석되었다. 공종별로는 철근콘크리트공사, 미장공사, 가설공사 등과 같이 전체 공정 중 초중반에 걸쳐 수행되는 공종에서 발생하는 이산화탄소 배출량이 전체 공종 중 92% 이상 차지하는 것으로 조사되었다. 반면, 폐기물 관리자들은 공정 중후반에 수행되는 마감공종의 폐기물 관리에 집중하고 있어서 폐기물로 인한 이산화탄소 배출량 증가 원인 중 하나로 작용하고 있음을 파악하였다. 또한, 전과정평가(LCA) 결과를 반영한 폐기물 관리방안 수립 기준을 제시함으로써, 건설현장에서 폐기물 관리방안 수립 시 활용할 수 있도록 하였다.

• 한국안전학회지
• /
• 제32권5호
• /
• pp.96-102
• /
• 2017

The highest fatal accident ratio was recorded in the construction industry. According to the industrial insurance premium rate & business type example, among the construction industry, the architectural work has the highest fatal and loss time accident ratio. Previous literature has investigated various aspects of accident occurrence and prevention in architectural work. However, those studied were limited in that they only focused on the fatal accident without considering the loss time accident. But non fatal accidents were recorded more than 50 times of fatal accidents. Therefore non fatal accidents must be controlled to lessen industrial accidents. Based on this, the goal of this study was to investigate the nature of the loss time accident and derive the risk index of work type in architectural work. In this study, opinions of safety experts were gathered and the risk index of work type was derived using AHP(Analytic Hierarchy Process). And verification was accomplished by comparing the results of this study with the risk index derived by analysis of accident records. Results showed that the risk index of work type was significantly higher in steel frame work, temporary installation work, earth & foundation work, facilities work, concrete work. And statistical analysis for verification showed that coefficient of Pearson correlation was 0.686 and P-value was 0.001.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.124-143
• /
• 2010

Cofferdam is a temporary levee or dam structure built by using sheet pile or earth materials to prevent water infiltration during construction work of bridge, dam, harbour dock, or hydraulic structures in the river. In this regard, it is required to secure cutoff ability for dry work and workability for rapid installation and removal of the temporary dam or levee structures. In this paper, case studies for design and construction of cofferdam were performed, and water diversion method was briefed with some examples of cofferdam type as well. For the case study details of design and construction were reviewed based on cofferdams under construction related to 16 submerged weirs of "The 4-river restoration project" and dam type cofferdam respectively. From the review, it was known that the method for changing the water flow is selected based on the data from geological and geo-hydraulic site investigation in order to mitigate environmental effects by making sure if the design cross-sectional area of flow and maximum working days are sufficiently guaranteed. Finally, the primary findings and main conclusion derived are summarized that determination of applicable type of cofferdam should be checked by case study and meet design requirements such as water inflow control, constructability.

• 한국건설관리학회논문집
• /
• 제10권2호
• /
• pp.132-144
• /
• 2009

본 연구에서는 기 준공된 국내 공공주택의 실적공사비 분석을 토대로 공공주택 공사비 추정을 위한 기초자료를 제시하고자 하였다. 이에 대한주택공사(이하 주공)에서 발주하여 2004년부터 2007년까지 준공된 각 지역별 23개의 공공주택을 연구 대상으로 선정하여, 실제 투입 및 정산된 실적공사비를 분석하였다. 분석항목으로는 주요 직접비 항목인 공통가설, 건축, 토목, 기계설비 4개의 공종을 대상공종으로 하였으며, 물가상승률을 고려한 경상가 기준의 투입 공사비를 준공연도, 지역, 연면적, 분양방식별로 분류하고, 이에 따른 $3.3m^2$당 실적공사비를 각 공종별로 비교 분석하여 평균 실적공사비를 토대로 한 공사비의 유추와 산정식을 분석 제시하였다.

• KIEAE Journal
• /
• 제16권4호
• /
• pp.41-46
• /
• 2016

Purpose: This is a study on the planning of temporary housing for post application of Mega Sports facilities. The subject of the study is 2018 Pyeongchang Winter Olympics, which is to suggest building an alternative temporary housing using shipping containers(high cube), which solve the lack of accommodations and recycle temporary housing after Olympics, save money and be eco-friendly in Olympics. Method: This study includes this ; research on the a fact-finding survey about Mega sports facilities post application and demand survey on 2018 Pyeongchang Winter Olympics accomodations and an analysis about temporary housing plan. Furthermore we decided temporary housing building plan by analyzing residents' needs and traits of the housing etc. Through this, we made a schematic design for household units. Result: As a result, this study is a plan of making space, forms, and structure. The planned size is $38.4m^2$(L:12m, W:3.2m) except balcony, and indoor height is 2.5m. The space consists of entrance, bathroom, bedroom and living room with folding furniture system. Also there's a detailed floor plan of the ceiling, wall, and floor we drew up. The ceiling and wall consist of dampproof film, noncombustible board, fire proof urethane form, and color-designed sheet. The floor is composed of floor tile, cement mortar, light concrete(with heat coil), insulation, and dampproof film. Additionally, this study is a plan of interior dry wall with detail using modular construction method for work efficiency and quality improvement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.751-756
• /
• 2001

Permanent-Form is one of system forms for reducing human labor, work costs, oscillation, noise, construction wastes and so on. Permanent-Form is made from precast method in facilities. and carried in construction site to assemble with no demolding. The biggest expense to produce Permanent-Form is about manufacturing mold. To satisfy various size of building member, the same number of manufacturing mold is needed. In this paper, studied about manufacturing mold module for acquiring economic merit and construction member safety. Permanent-Form is member stress and structural analyzed if temporary equipment were used. The result of this study is below. (1) Column sizes of Permanent-Form are 47 kinds of prototype that based on Modular coordination's basic module. 4 pieces or 6 pieces are composed basically. (2) For beam size modular coordination, standard height and width of beam are 150mm and 100mm. It brings 24 kinds of prototype. 4 pieces or 5 pieces are composed basically. (3) Structural analysis value of modular member is like this Column member shows 9.4 to 85kgf/$cm^{2}$ stress distribution and beam member shows 6.3 to 95kgf/$cm^{2}$ stress distribution. Constructing permanent form could have structural safety with use of temporary equipment

• 한국지반환경공학회 논문집
• /
• 제21권8호
• /
• pp.5-13
• /
• 2020

노후시설물의 지하공간 확장공사 시 공사 중 소음 및 진동 문제 뿐만 아니라 기존 주민의 임시 거주공간 확보가 필요하고, 상업용, 공업용, 사회용 등의 시설물의 경우에는 시설물 이용의 중단에 따른 피해가 예상되므로, 지하증축 공사 중 소음 및 진동을 최소화하여 공사 중에도 기존 시설물의 이용을 가능하게 하는 기술이 필요하다. 따라서 본 연구에서는 가설구조물의 안정성 문제와 공사 중 발생되는 소음진동 문제를 효과적으로 해결하여 지하증축 공사 중 시설물을 이용하면서 진행한 공사현장의 시공단계별 계측결과로 가설구조물과 주변지반의 거동을 분석하여 국내 현실에 적합한 지하증축공사 모델을 제시하였다. 시공 시 발생되는 문제를 해결하기 위해 초기 굴착 후 슬라브 선타설공법을 적용한 현장의 계측결과(건물경사계, 균열측정계, 구조물경사계, 지표침하계)를 확인한 결과 건물경사계와 구조물경사계는 슬라브 선타설후 변위가 감소하거나 수렴하는 경향을 확인할 수 있었으며, 균열측정계와 지표침하계는 관리기준 이내의 안정적인 모습을 확인할 수 있었다. 이 결과로 볼 때, 지하증축 공사 시 지하층 슬라브를 선타설하는 것은 공사 중 발생하는 소음·진동의 문제를 해결해주는 것 뿐만 아니라 지하증축 공사 시 가설구조물의 안정성을 확보하는데 큰 역할하고 있는 것을 확인할 수 있었다.

• 건축역사연구
• /
• 제10권3호
• /
• pp.61-76
• /
• 2001

The purpose of this study is not only to evaluate the capacity of construction management but also to understand the capacity of construction productivity by analysing various information, mainly collected from the book, HwaSungSungYouk-EuGye. The book was made by ChungCho who was one of the great kings Choson Dynasty, which has lots of information about how to build HwaSung during the last of the eighteen century. It is true that previous researches have showed lots of limitation to study the HwaSungSungYouk-EuGye though it contained a plenty of construction data. The main reason would be the absence of study methods to analyze HwaSungSungYouk-EuGye systematically. That's why there have not been overall studies about the HwaSungSungYouk-EuGye. This study starts from the definition that the HwaSungSungYouk was one of the construction projects which is the concept for construction management today. The construction project can be defined in terms of its distinctive characteristics: a project is a temporary endeavor undertaken to create a unique product. Temporary means that every project has a definite beginning and a definite end. Unique means the product is different in some distinguishing way from all similar products. A project is also undertaken several kinds of organizations. They may Involve a single person or many thousands. This study is to show some of the effective methods. Firstly, the concept of the database system today can be applied to effectively control and classify the complicated data in the HwaSungSungYouk-EuGye. Secondly, on the basis of the database system, the concept of modern construction management will be also use to figure out the construction data of the HwaSungSungYouk-EuGye.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.159-164
• /
• 2004

Recently the unexpected damage is broken out by the unusal change of weather. Misfortune on top of misfortune the typhoon did great damage again before finishing the repair work. And then we should study about the repair work of fast and safety as well as the construction of safety. The paper suggests the case study of a fast disaster restoration work. To minimise the term of repair work which selects Fast Track Method. This work is processed as follows. Temporary resortation is progressed at the same time as the main resortation. And In this paper, technique to evaluate the capacity of bridge is tried to develop by means of FEM analysis.