• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.97-110
• /
• 2007

A laser scanning technique has been attracting much attention as a new technology to acquire location information. This technique might be applicable to a wide range of areas, most notably in geomatics, due to its high accuracy of location and automation of high-density data acquisition. A alignment information extraction system on highway has been developed in this study by utilizing the advantages of the laser scanning technique. The system can accurately interpret the alignment information of highway and can be applied to actual works. To develop the alignment information extraction system on highway, an algorithm that can automatically separate a horizontal alignment into a straight line, a transition curve, and a circular curve was developed. It can increase its efficiency compared to the conventional methods. In addition, an algorithm that can automatically extract design elements of horizontal and vertical alignments of highway was developed and applied to an object highway. This yielded higher practicality with more accurate values compared to those from previous studies on the extraction of design elements of highway alignment. Furthermore, the extracted design elements were used to perform a virtual driving simulation on the object highway. Through this, data were provided for a visual judgment for judging visually whether the topography and structures were harmonized in a three-dimensional manner or not. The study also presents data that can serve as a basis to determine highway surface freezing sections and to analyze three-dimensional sight distance models. Through the establishment of a systematic database for diverse data on highway and the development of web-based operating programs, an efficient highway maintenance can be ensured and also they can provide important information to be used when estimating a highway safety in the future.

• Weed & Turfgrass Science
• /
• v.3 no.1
• /
• pp.29-40
• /
• 2014

Research was initiated to investigate early establishment characteristics and germination pattern of Kentucky bluegrass (KB, Poa pratensis L.). Fifteen cultivars were evaluated under alternative conditions (8 hours light at $25^{\circ}C$ and 16 hours dark at $15^{\circ}C$). Significant differences were observed in germination characteristics and germination pattern among KB cultivars. A final germination percentage differed in cultivars, being 75.25 to 89.50%. The first germination was initiated between 6 and 9 DAS (days after seeding). As for the first germination percentage, 'Brilliant' and 'Midnight II' produced 14.50% and 23.00%, respectively, while the others were most below 5%. Days to 75% germination were between 15.08 and 28.80 DAS. 'Excursion', 'Midnight II', 'Odyssey', 'Midnight' and 'Courtyard' were fastest. The slowest cultivar was 'Voyager II', being over 28 DAS, which were 13 to 14 days slower than the fastest ones. Considering the first germination percentage, days to the first germination, days to 75% germination, and germination pattern, 'Midnight II', 'Excursion' and 'Midnight' were regarded as excellent cultivars under alternative conditions. From this study, information on differences in germination characteristics and patterns would be practically useful for a golf course construction when established with KB.

• Ecology and Resilient Infrastructure
• /
• v.2 no.1
• /
• pp.12-21
• /
• 2015

Social demand for ecological engineering and technology has increased in tandem with national economic growth in order to improve the environmental capacity of civil infrastructures. To meet this demand, the Korean Society of Ecology and Infrastructure Engineering (KSEIE) was established in January 2013 and has contributed to the development of ecological engineering technologies. However, the establishment of an educational system for human resources training in ecological engineering is still at an early stage, and it is imperative to develop a curriculum for producing the human resources that can understand and apply ecological principles and functions and that is equipped with the abilities required for ecological conservation, restoration, and creation. As part effort, the KSEIE held a forum, entitled Founding the Education for Ecological Engineering, to discuss the establishment of the education system for ecological engineering in Korea. In this paper, based on the discussions and suggestions made during the forum, we analyzed the current status of ecological engineering education in various disciplines - civil and construction engineering, biology and environment, and landscape planning - in domestic universities, and attempted to seek possible solutions based on the cases of foreign universities. Generally, ecology and other application curricula are taught as fragmented subjects and fields in domestic universities. The development of new education strategies and systematic curricula for multidisciplinary education, ecological response to climate change, and the expansion of research fields is required.

• Journal of Educational Research in Mathematics
• /
• v.16 no.4
• /
• pp.367-386
• /
• 2006

There are two strands for considering tile relationships between education and technology. One is the viewpoint of 'learning from computers' and the other is that of 'learning with computers'. In this paper, we call mathematics education with computers as 'computers and mathematics education' and this computer environments as microworlds. In this paper, we first suggest theoretical backgrounds ai constructionism, mathematization, and computer interaction. These theoretical backgrounds are related to students, school mathematics and computers, relatively As specific strategies to design a microworld, we consider a physical construction, fuctiionization, and internet interaction. Next we survey the different microworlds such as Logo and Dynamic Geometry System(DGS), and reform each microworlds for mathematical level-up of representation. First, we introduce the concept of action letters and its manipulation for representing turtle actions and recursive patterns in turtle microworld. Also we introduce another algebraic representation for representing DGS relation and consider educational moaning in dynamic geometry microworld. We design an integrating microworld between Logo and DGS. First, we design a same command system and we get together in a microworld. Second, these microworlds interact each other and collaborate to construct and manipulate new objects such as tiles and folding nets.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.2
• /
• pp.13-21
• /
• 2020

In Korea, small reservoirs have been constructed for the supply of agricultural water, but most of them have been over 50 years from the year of construction. Aging agricultural reservoirs are being investigated for serious defects such as leaks and movements in slope, which are very vulnerable to safety. Accordingly, grouting methods are used to reinforce aging agricultural reservoirs in Korea. However, cement used as a grouting injection material consumes natural resources and generates a large amount of greenhouse gases during production. In addition, there is a problem that sufficient reinforcement is not made due to various factors such as the injection amount, the compounding ratio, the injection pressure, and etc. Therefore, due to these problems, the development of new materials and methods that can replace the grouting method and cement is required. In order to solve these problems, this study conducted an laboratory test on the surface stabilizer used to secure the stability of road and rail slopes. In addition, the program was analyzed and the reinforcing effect was examined when the surface stabilizer was used as reinforcement material for aging agricultural reservoir. As a result of the laboratory test, when the surface stabilizer is mixed, the increase of cohesion is possible up to 9% and there is no change in the friction angle. The results of the program analysis showed that the 1.0m reinforcement of slopes increased the factor of safety by 1.4 times, making it possible to reinforce the aging agricultural reservoir using surface stabilizers. And as a reinforcement method, it was analyzed that it is most appropriate to reinforce the slope and the bottom of slope simultaneously.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.1
• /
• pp.59-70
• /
• 2014

In recent years, Chinese government established 4 pilot zones at Shandong, Zhejiang, Guangdong, Fujian. The national marine development pilot zones policy is formed in order to promote development of Chinese marine economy, as if Chinese government selected 4 special economic zones as the policy experiment areas for economic structural reform at the beginning stage of reform and opening-up. This article utilizes the policy-making theory of Incrementalism Model and aims at searching for the essence, historical formation process, implementation state, implications of 4 Chinese marine economic development pilot zones policy. Moreover, the prospect of their future development is analyzed. The marine pilot zone policy has the following features: new development model with advanced industries and sciences & technology, highly civil participation, plural policy goals. These research results would be able to contribute not only to getting better understanding of China's marine industry policy, but also to drawing lessons for the construction of Korea's marine economic special zone in the viewpoint of policy transfer.

• Nuclear Engineering and Technology
• /
• v.40 no.6
• /
• pp.451-458
• /
• 2008

After more than 10 years construction, KSTAR (Korea Superconducting Tokamak Advanced Research) had finally completed its assembly in June 2007, and then achieved the goal of first-plasma in July 2008 through the four month's commissioning. KSTAR was constructed with fully superconducting magnets with material of $Nb_3Sn$ and NbTi, and their operation temperatures are maintained below 4.5K by the help of Helium Refrigerator System. During the first-plasma operation, plasmas of maximum current of 133kA and maximum pulse width of 865ms were obtained. The KSTAR Integrated Control System (KICS) has successfully fulfilled its missions of surveillance, device operation, machine protection interlock, and data acquisition and management. These and more were all KSTAR commissioning requirements. For reliable and safe operation of KSTAR, 17 local control systems were developed. Those systems must be integrated into the logically single control system, and operate regardless of their platforms and location installed. In order to meet these requirements, KICS was developed as a network-based distributed system and adopted a new framework, named as EPICS (Experimental Physics and Industrial Control System). Also, KICS has some features in KSTAR operation. It performs not only 24 hour continuous plant operation, but the shot-based real-time feedback control by exchanging the initiatives of operation between a central controller and a plasma control system in accordance with the operation sequence. For the diagnosis and analysis of plasma, 11 types of diagnostic system were implemented in KSTAR, and the acquired data from them were archived using MDSpius (Model Driven System), which is widely used in data management of fusion control systems. This paper will cover the design and implementation of the KSTAR integrated control system and the data management and visualization systems. Commissioning results will be introduced in brief.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.2
• /
• pp.191-197
• /
• 2005

A new method, ToxTemp (TOXcity test based on TEMPerature control) using Ceridaphnia dubia was applied to evaluate the toxicity of insecticide materials and compared with the standard 48 hr acute bioassay. BPMC, diazinon and fenitrothion may cause the inhibition to the biological process in sewage treatment plant and need to detect toxicity within short contact time. The ToxTemp method showed sensitive detection with more shorter contact of 1-1.5 hr time than that of the standard 48 hr acute bioassay. To evaluate toxicity of real wastewater/sewage, the inhibition rate of nitrification and oxygen uptake rate (OUR) using activated sludge, the standard 48hr acute bioassay and ToxTemp method using C. dubia were compared, respectively. On the basis of the inhibition rate of nitrification, the OUR test showed the less sensitive results at the relatively strong toxic sewage. On the other hands, the standard 48hr acute bioassay and ToxTemp method using C. dubia represented the toxicity of each wastewater/sewage with high sensitivity. Even the slightly low (about 1.5%) sensitivity, the ToxTemp method showed the high applicability to the real site of sewage treatment plant.

• Journal of the Korea Concrete Institute
• /
• v.23 no.1
• /
• pp.121-127
• /
• 2011

In this study, possible use of indigenous natural loess (Hwangtoh) as a new binding material via geopolymerization process is examined. Hwangtoh pastes with four different mix proportions of varying alkali liquid concentrations (6 M, 8 M) and the constituents of the binder as well as the alkali liquid at a constant liquid-to-binder ratio of 0.55 were prepared. Analysis of the natural loess (Hwangtoh) paste was carried out as follows : 1) Measurement of compressive strength and weight of cubic specimens versus curing time; 2) Analysis by X-ray diffraction (XRD) and scanning electron microscope (SEM) about reaction product; 3) Porosity analysis of hardened Hwangtoh paste. The result showed that it is possible to prepare Hwangtoh paste with 29.1 MPa at the age of 7 day by using alkali solution (made as 1 : 4.5 the mass ratio of liquefied $Na_2SiO_3$ and NaOH solution and applying the curing temperature of $60^{\circ}C$). Compressive strength development with respect to the degree of moisture evaporation from the paste seems to be independent of curing temperature. Therefore, it seems that higher early strength of the paste specimens cured at higher temperature can be attributed to both higher rate of reaction and moisture evaporation.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.11
• /
• pp.119-127
• /
• 2013

Recently, several researches on the development of new economical foundation types have been performed to support floating structures as many offshore structures have been constructed. This study focused on the evaluation of bearing capacity of group suction piles, which are connected by a concrete pile cap. The offshore floating structures are mainly subjected to horizontal loading, so the horizontal bearing capacities of the group suction piles were analyzed by performing 3-dimensional finite element analyses. The group suction piles are expected to behave as a rigid pile due to its shallow embedded depth. Therefore, the detailed soil modeling was necessary to simulate the bearing behavior of soils under low confining pressure. The modulus and the strength of soils were modelled to increase with effective confining pressure in soils. For the parametric study, the center-to-center spacing between piles was varied and two soil types of clay and sands were applied. The analyses results showed that the yielding load of the group pile increased with the increase of the pile spacing and the yielding load of the group piles with 5D spacing was about 3 times larger than that of the single pile with free rotation.