• Journal of the Korean Geosynthetics Society
• /
• v.10 no.4
• /
• pp.93-103
• /
• 2011

In order to design suitable geo-structures in cold region, it is generally required to consider the mechanical properties of permafrost soils. 'Frost heave' as one of the primary phenomenon is considered to be an important factor together with 'adfreeze bond-strength' and 'creep deformation' for structural design process in permafrost area. Therefore, the fundamental study for frost heave has to be preceded for design of geo-structures in cold region. While various experimental apparatuses have been developed, there still exist a certain level of limitation to evaluate the frost-heave characteristics as design parameters. In this paper, a new type of experimental apparatus is proposed to evaluate the engineering characteristics of frost heave in permafrost soils and a set of verification test results is presented. Based on the verification tests, the proposed apparatus is a suitable to obtain frost characteristics of soils.

• Advances in Computational Design
• /
• v.5 no.2
• /
• pp.127-146
• /
• 2020

Building Information Modeling (BIM) is increasingly used throughout the facility's life cycle for various applications, such as design, construction, facility management, and maintenance. For existing buildings, the geometry of as-built BIM is often constructed using dense, three dimensional (3D) point clouds data obtained with laser scanners. Traditionally, as-built BIM systems do not contain the material and textural information of the buildings' elements. This paper presents a semi-automatic method for generation of material and texture rich as-built BIM. The method captures and integrates material and textural information of building elements into as-built BIM using thermal infrared sensing (TIS). The proposed method uses TIS to capture thermal images of the interior walls of an existing building. These images are then processed to extract the interior walls using a segmentation algorithm. The digital numbers in the resulted images are then transformed into radiance values that represent the emitted thermal infrared radiation. Machine learning techniques are then applied to build a correlation between the radiance values and the material type in each image. The radiance values were used to extract textural information from the images. The extracted textural and material information are then robustly integrated into the as-built BIM providing the data needed for the assessment of building conditions in general including energy efficiency, among others.

• Ocean and Polar Research
• /
• v.25 no.4
• /
• pp.447-457
• /
• 2003

In order to understand the distribution of changes of geochemical characteristics in surface sediments according to various environmental changes around the artificial Lake Shihwa, surface sediments were sampled at $13{\sim}15$ sites form 1997 to 1999 and analyzed by C/S analyzer, ICP/MS and AAS. The average $S/C_{org}$ ratio was 0.35 in the surface sediments, which is similar to 0.36, the characteristic ratio of marine sediments. Heavy metal contents and enrichment factors in the surface sediments tended to be decreasing from the head to the mouth of the Lake Shihwa. With the deposition of fine-grained sediments in the central part of lake, anoxic water column induced the sulfides compounds with Cu, Cd and Zn. Metals such as Al, Fe, Cr, Co, Ni, Cu, Zn and Cd except for Mn and Pb showed relatively high correlation coefficients among them. The contents of Cr, Co, Ni, Cu, Zn and Cd in the surface sediments of the lake were two to five times higher than those in the lake before dike construction and also in outer part of the dike. These are mainly due to the Input of untreated industrial and municipal waste-waters into the lake, and the accumulation of heavy metals by limitation of physical mixing. Although metal contents of the surface sediments at the sites near the water-gate due to outer seawater inflow tended to be lower than those during the desalination, heavy metals were deposited in areas around the new industrial complex in the evidence of spatial distribution of heavy metals in the sediments. This is mainly due to the input of untreated waste-waters from tributaries.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.4
• /
• pp.127-134
• /
• 2017

A rotary table is a positioning device used in metalworking for the multiple axes of machine tools, and the utilization trend is increasing with machining efficiency. In the construction of a rotary table, the core technology is a power transfer unit that drives the table, typically a gear type and a roller gear cam type. As the rollers installed on the turret column have rolling movement on the contact surface of the roller gear cam, the roller gear cam type has the advantage of low wear, high load, and fast driving. Therefore, it is currently being replaced by a roller gear cam type. In this study, we researched a 5-axis machining method for the roller gear cam on a rotary table and a new method of applying double roller gear cam curve to reduce the noise and shock between the roller and the cam surface. We implemented the 5-axis machining process in this study using software to generate NC-code and machined the roller gear cams using a Mazak Integrex-200IV. We found that the roller gear cam and turret were able to identify mutual touch status and the noise from the operation of the roller gear cam was substantially reduced.

• Journal of Korea Water Resources Association
• /
• v.41 no.6
• /
• pp.575-585
• /
• 2008

It is essential to obtain accurate and highly reliable streamflow data for water resources planning, evaluation and management as well as design of hydraulic structures. A new discharge computation method proposed in this research uses Chiu's velocity distribution and estimation of maximum velocity. This method shows acceptable channel discharges comparing these by the exiting velocity-area method. When velocity-area method is used, it is required to observe velocities at every specified point and vertical line using a velocity meter like Price-AA. If the method proposed in this research, is used, however it is not necessary to observe all point velocities needed in the velocity-area method. But this method can not be applied for the cases of very complex and strongly asymmetric channel cross-sections because Chiu's velocity distribution using entropy concept may be quite biased from that of natural rivers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.569-574
• /
• 2020

A floating dock is the main facility for launching ships. In the early 2000s, ship-launching technology using floating docks was developed in Korea. Therefore, the opportunity to participate in new construction projects without investment in dry docks has expanded. In this paper, a basic calculation for the safe mooring of a floating dock was performed, and a mooring system was designed based on this. This study was conducted considering the typhoon situation, which is the most serious environmental requirements of Daebul Pier, a site to be installed and operated, for a floating dock. The design load was calculated by wind load, tidal load, and wave-induced load in accordance with the internationally accepted standards. After performing the initial arrangement of the mooring line of the floating dock using the existing mooring facilities of Daebul Pier, the minimum breaking load for each mooring line was calculated for the given load. Based on the calculation, the mooring arrangement was modified to minimize the breaking load, and a final specification of each mooring line was selected.

• Ocean and Polar Research
• /
• v.27 no.2
• /
• pp.135-148
• /
• 2005

Macrobeilthic fauna were collected using a van Veen grab $(0.1m^2)$ to investigate the spatial characteristics of the macrobenthos community at 28 stations near the Nakdong River estuary, Southeast Korea, in September 2001. A total of 203 species were sampled with a mean density of $1,554 ind./m^2$ and a biomass of $252.3 gWWt/m^2$. Annelids were the dominant faunal group in terms of species and density, with 68 species and a mean density of $1,031ind./m^2$, which comprised 33.5% and 66.3% of the total benthic animals, respectively. Based on density, three Polychaetes were dominant Tharyx sp· $(420ind./m^2)$, Lumbrineris longifolia $(143ind./m^2)$, and Sternaspis scutata $(118ind./m^2)$, along with a bivalve Theora fragilis $(129 ind./m^2)$. On cluster analysis, the benthic community was classified into four groups based on the species composition: Group-1 occurred in disturbed areas, Group-II in coastal regions, Group-III in central mariculture grounds, and Group-IV offshore. Environmental factors (mean gain size, organic carbon, and depth) were primarily correlated with the macrobenthos community structure. A benthic pollution assessment based on the macrobenthos community structure showed that Group-I and Group-II were located in a coastal area that had been severely disturbed by construction of Busan new port and various pollutants, Group-III was gradually polluted, while offshore Group-IV was the most stable.

• Korean Journal of Organic Agriculture
• /
• v.11 no.2
• /
• pp.23-42
• /
• 2003

The study must have standpoints for the stable market construction of the Environmental-Friendly agricultural products of the quality-certificated which has rapidly grown due to a discussion of the environment and agriculture, income increase and the interests on foods stability. The survey was conducted through face-to-face interview of 200 adults who are in their twenties or more in Cheonan-city. In this research, the Environmental-Friendly agriculture was a clean agriculture not using a fertilizer or chemicals and the agriculture which protects the environment by preventing the environmental pollution. In the analyses of the consumer's willingness to pay, the rice showed 69,851 won, and a lettuce and bean-curd showed 947 won and 1.412 won respectively. In terms of current issues of the policy, to establish the stable circulation structure and consumption strategy, there must be a clearness raise of the Quality Authentication (QA) Mark. To raise the trust through quality authentication, there must be transparency raise of information by distribution stages and the thorough post management of the official institutes. Also, to persue the competitive product differentiation, there must be the settlement of the product brand on the market, development of the new production technology and a classification of consumers by incomes. Finally to construct stable distribution and price system, there must be active participation of the local agricultural cooperatives in the distribution of the Environmental-Friendly agricultural products of the quality-certificated and the understanding of the proper price of the consumer market and flexible strategy of the price change.

• International Journal of Highway Engineering
• /
• v.17 no.5
• /
• pp.25-31
• /
• 2015

PURPOSES: The objective of this study is to analyze the relationship between the FWD back-calculated modulus and dynamic modulus of asphalt layers for existing asphalt pavements. METHODS: To evaluate the dynamic modulus of the asphalt mixture in the existing and new asphalt layers, the uniaxial direct tension test was conducted on small asphalt specimens obtained from the existing asphalt-covered pavements. A dynamic modulus master curve was estimated by using the uniaxial direct tension test for each asphalt layer. The falling weight deflectometer (FWD) testing was conducted on the test sections, and the modulus values of pavement layers were back-calculated using the genetic algorithm and the finite element method based back-calculation program. The relationship between measured and back-calculated asphalt layer moduli was examined in this study. The normalized dynamic modulus was adopted to predict the stiffness characteristics of asphalt layers more accurately. RESULTS: From this study, we can conclude that there is no close relationship between dynamic modulus of first layer and back-calculated asphalt modulus. The dynamic moduli of second and third asphalt layers have some relation with asphalt stiffness. Test results also showed that the normalized dynamic modulus of the asphalt mixture is closely related to the FWD back-calculated modulus with 0.73 of R square value. CONCLUSIONS: The back-calculated modulus of asphalt layer can be used as an indicator of the stiffness characteristics of asphalt layers in the asphalt-covered pavements.

• Journal of Korea Water Resources Association
• /
• v.48 no.12
• /
• pp.995-1009
• /
• 2015

Weather radar rainfall data has been recognized for making valuable contributions to short-term flood forecasting and management over the past decades. There are several advantages to better monitoring rainfall in ungauged area compared to ground-based rain gauges with which spatial patterns of the rainfall are not effectively identified. Hence, this study aims to develop a new scheme to forecast spatio-temporal rainfall field. The proposed model was based on an advection scheme to track wind patterns and velocity. The results showd a promising forecasting skill with quantitative and qualitative measures. It was confirmed that the forecasted rainfall may be effectively used an input data for a distributed hydrological model.