Acknowledgement
Supported by : 연구개발특구진흥재단
References
- Muditha Dassanayake K. M. and Tsutsumi M., "High Performance Rotary Table for Machine Tool Applications", Int. J. of Automation Technology, Vol.3, No.3, pp.343-344, 2009. https://doi.org/10.20965/ijat.2009.p0343
- Daeyoung CoreTek Co., Ltd., "Development of Precision Roller Gear Cam Rotary Table", Project Report, pp.12-39, 2017.
- Cho, H. D., Yoon, M. C. and Kim, K. J. "5-Axis CNC Machining of Roller Gear Cam", Jorunal of Korean Society of Manufactruing Technology Engineers, Vol. 19, No. 6, pp.739-745, 2010.
- Cho, H. D., Yoon, M. C. and Kim, K. J. "5-Axis CNC Machining of Drum Cam with Rotaional Follower - I (Post Processing Method for Rough Machining)", Jorunal of Korean Society of Manufactruing Technology Engineers, Vol. 19, No. 5, pp.678-683, 2010.
- Cho, H. D., Yoon, M. C. and Kim, K. J. "5-Axis CNC Machining of Drum Cam with Rotaional Follower - II (Post Processing Method for Fine Machining)", Jorunal of Korean Society of Manufactruing Technology Engineers, Vol. 19, No. 5, pp.684-690, 2010.
- Cho, S. R., Lee, C. M. and Chung, W. J., "A Study on the Modeling of Roller Gear Cam", Jorunal of Korean Society of Manufactruing Technology Engineers, Vol. 10, No. 3, pp.31-37, 2001.
- Kim, J. S., Kang, S. K. and Lee, D. S., "A Study on the Machining Characteristics of Prototype of Roller Gear Cams", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 5, pp.60-67, 2012.
- Jung, H. C., Hwang, J. D., Kim, S. M. and Jung Y. G., "The Postprocessor Technology of for 5-axis Control Machining", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No.2, pp.9-15, 2011.
- Hwang, J. D., Lim, E. S. and Jung, Y. G., "The Control Technology of Cutter Path and Cutter Posture for 5-axis Control Machining", Journal of the Korean Society of Manufacturing Process Engineers, Vol.10, No.2, pp.1-8, 2011.
- Kim, H. J., Jang, J. H. and Kim, N. K., "A Study on Interference Phenomenon of a Machine Tool when 5 Axises Working with Virtual Machine Tool", Journal of the Korean Society of Manufacturing Process Engineers, Vol.4, No.2, pp.16-23, 2005.
- Hwang, J. D., Yang, J. S., Yun, S. H. and Jung, Y. G., "Hybrid Technology using 3D Printing and 5-axis Machining for Development of Prototype of the Eccentric Drive System", Journal of the Korean Society of Manufacturing Process Engineers, Vol.15, No.2, pp.38-45, 2016. https://doi.org/10.14775/ksmpe.2016.15.2.038
Cited by
- 볼기어캠의 4-축 가공에 관한 연구 vol.18, pp.9, 2017, https://doi.org/10.14775/ksmpe.2019.18.9.081
- 볼기어캠의 5-축 가공에 관한 연구 vol.19, pp.12, 2020, https://doi.org/10.14775/ksmpe.2020.19.12.098
- Development of Automatic Ball Feeder and Alignment System for Remote-Controlled Munition System vol.30, pp.2, 2021, https://doi.org/10.7735/ksmte.2021.30.2.162