• 한국산업융합학회 논문집
• /
• 제5권2호
• /
• pp.103-110
• /
• 2002

An artificial neural network is applied to the prediction of compressive strength, slump value of concrete. Standard mixed tables arc trained and estimated, and the results are compared with those of experiments. To consider the varieties of material properties, the standard mixed tables of two companies of Ready Mixed Concrete are used. And they are trained with the neural network. In this paper, standard back propagation network is used. For the arrangement on the approval of prediction of compressive strength and slump value, the standard compressive strength of 210, $240kgf/cm^2$ and target slump value of 12, 15cm are used because the amount of production of that range arc the most at ordinary companies. In results, in the prediction of compressive strength and slump value, the predicted values are converged well to those of standard mixed tables at the target error of 0.10, 0.05, 0.001 regardless of two companies.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 2001년도 International Conference CALS/EC KOREA
• /
• pp.141-154
• /
• 2001

This paper presents a fundamental study to establish a standardization system of the Construction Continuous Acquisition and Life-cycle Support(CALS). States of standardization in the Construction CALS were reviewed to find some defects in developing CALS system in construction industry. It is analyzed that three of major parts were needed to put up a standardization system for the Construction CALS. Firstly, the range of Construction CALS standardization is set up by identifying of Construction CALS and defining the standard and standardization. Secondly, the strategy to enable more effective implementation of Construction CALS standardization and the relationship of the concerned system presented can be used for establishing the Construction CALS standardization system. In addition, the spread and application device is proposed for using Construction CALS standards at public institutions and construction related companies. Conclusively, a classification system of the Construction CALS standards was proposed and some objects to be standardized were presented in the classification system. What were studied in this paper will provide the primary information and guidance to develop a guideline for standardization of the Construction CALS.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.762-767
• /
• 2007

시설물이 건설되는 생애주기의 전 과정에서 파생되는 방대한 정보는 저장 ${\cdot}$ 가공 ${\cdot}$ 교환을 필요로 하며, 이는 모든 분야에 적용된다. 또한, 기술의 진보로 인해 정보의 취합 ${\cdot}$ 접근방법 ${\cdot}$ 교환이 빈번하게 파생되고 있으며, 건설분야에 종사하는 실무자들의 자재정보획득 절차의 효율성 및 용이한 접근성에 대한 요구도 증대되고 있는 실정이기 때문에, 이를 해소하기 위한 활용성 및 확장성 ${\cdot}$ 표준성을 기반으로 한 건설자재 분류체계는 필수 불가결한 요소로 부각되고 있다. 그러므로 본 연구에서는 건설자재 분류체계의 국제표준성을 확보하고자 ISO기준에 대한 검토를 선행하여으며, 건설실무자들의 활용성 증대를 위한 건설 공정별 분류형식을 자재분류체계에 접목하고자 하였다. 이를 위해 국제표준 및 전자정보화를 위해 개발된 국제 통합분류체계인 OmniClass의 상세분석을 기반으로 건설공정별 분류인 Table 22와 UniClass의 상품 및 자재부분을 적용한 Table 23, 35, 41을 비교하여 건설자재 분류체계의 확장성 및 표준성을 확립하고자 하였다. 또한, 향후 전자상거래를 통한 사용성 및 국제호환성을 확보하기 위하여 국제상품분류(UN/SPSC)의 소성코드체계 접목도 시도하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.145-148
• /
• 2011

As a futuristic construction model, building information model(BIM) based project management system(PMIS) and mobile PMIS have been showing visible sign. However, researches on the 3D BIM based PMIS using mobile device are hard to find, result from limitation of mobile device application(slow speed at huge BIM file, display size, and etc.) and undefined standard of business processes. Therefore, this research aims at studying feasibility of mobile BIM PMIS based on cloud computing as a business model. In case of applying mobile BIM PMIS, 3D drawings and integrated building informations are possible on mobile devices in real time. it would support increasing the productivity of project participants as designer, engineer, supervisor, and etc. Globally, BIM based PMIS and Mobile BIM system, cloud computing based mobile BIM simulator are in the concept or experimental phase, therefore it is possible to secure global leading technology of IT and construction merger in the mobile BIM.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.637-638
• /
• 2015

There has been growing interests in life-cycle project management in the construction industry. A lot of attention is given to Building Information Modeling (BIM) which stores and uses a variety of construction information for the life cycle of project management. However, due to the additional workload arising from BIM, its expected effects versus its input costs are still under discussion in practice. As an attempt to address this issue, one of previous studies suggested an automated linking process by developing Standard Classification Numbering System (SCNS) and Geometry Breakdown Structure (GBS) to enhance the efficiency of integration process of BIM objects, cost, and schedule. Though SCNS and GBS facilitates identifying all different dataset, making object sets and linking schedule activities still needs to be manually done without having an automated tool. In this context, the purpose of this paper is to develop and validate a fully automated integration system for 3D-objects, cost, and schedule. A prototype system for single family homes (Hanok) was developed and tested in order to verify its efficiency.

• 한국건축시공학회지
• /
• 제16권2호
• /
• pp.133-140
• /
• 2016

건설공사에 있어 노무량은 건설공사비 산정을 위한 기준으로 사용되고 있고, 건설산업의 생산성을 파악하는 근거자료로도 활용되고 있다. 하지만 노무량의 기준이라고 하는 표준품셈과 실제투입 노무량과 큰 차이를 보이고 있어 이를 해결할 수 있는 방안이 필요하다. 따라서 본 연구에서는 실제투입 노무량을 좀 더 정확하고 간편하게 입력할 수 있는 시스템을 구축하기 위하여 전통적인 종이와 펜을 이용한 수기방식을 그대로 따르면서 전자문서화에 대한 이중부담이 없는 디지털펜을 이용하는 방안을 제시하고자 한다. 본 연구를 통해 실투입 작업정보를 단순히 저장하는 것뿐만 아니라 웹을 통한 공유 및 활용을 통해서 공사비 산정업무의 생산성 측면에서도 기여할 것으로 사료된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1235-1240
• /
• 2011

Urban transit system consist of complex system such as vehicle, signal, train control equipment, railway facilities, electricity facilities, station facilities and information & communications facilities. So a study on construction of management system for complex system. using system-engineering tool, Urban transit standardization of steps 2 perform architecture for urban transit standardization, requirement management and data-base construction. A study expect that provide more efficient and methodical information system to all user for using standardization.

• 산업공학
• /
• 제23권3호
• /
• pp.213-220
• /
• 2010

As the market becomes increasingly globalized and competition among companies increases in severity, various specialized organizations are participating across the process plant lifecycle, including the stages of design, construction, operation and maintenance, and dismantlement, in order to ensure efficiency and elevate competitiveness. In this regard, it is an important technical issue to develop services or information systems for sharing process plant data among participating organizations. ISO 15926 is an international standard for integration of lifecycle data for process plants including oil and gas facilities. ISO 15926 Part 7, a part of the ISO 15926 standard, specifies an implementation method called a facade that uses Web Services and ontology technologies for constructing plant data repositories and related services, with the aim of sharing lifecycle data of process plants. This paper discusses the ISO 15926-based prototype facade implemented for storing equipment data of nuclear power plants and servicing the data to interested organizations.

• 한국실내디자인학회논문집
• /
• 제25권5호
• /
• pp.140-147
• /
• 2016

This research aims to establish the size standard of university library's user space, and present the standard and method to calculate total area required in the planning of new building construction and remodeling. Nine university libraries newly constructed or remodeled since 2000 were selected among the libraries of large scale universities with more than 10,000 enrolled students as the target libraries in this research. The target libraries were classified into A group (five cases partially remodeled) and B group (four cases newly constructed or fully remodeled) on the basis of the change of times. A university library can be divided into three spaces (user space, administration space and public space). This research classified the reading room in the user space into bookshelf zone, reading zone, information/office zone and hall/other zone, and analyzed area ratio according to each zone. B group's bookshelf zone decreased 12% more than A group, and B group's reading zone increased 10% more than A group. However, there was no big change in the area ratio of information/office zone and hall/other zone. This can be interpreted that university library changes from book and archive preservation-oriented space to user-oriented space. This research presented a proper reading room area calculation method, based on the capacity of books, by reflecting such a change. Each zone's standard was set up through classification of domestic and international standards, based on which, the calculation method of university library's total floor area required was presented. The reason why there was difference in university library's total floor area required according to domestic standard and international standard was that the number of enrolled students per seat in the reading room was different. The area calculation methods presented in this research can be utilized as useful data upon planning university library construction or remodeling.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.503-510
• /
• 2000

Recently, many kinds of research has been actively developing for a standardization and information related to the construction works. These works include the general field of design, construction, supervision, maintenance and management on facilities. The works of database construction for a standardization and information were chiefly propelled centering around the present conditions related to the design, construction work. The field related to maintenance and management on facilities lags behind in the works of database construction. The establishment of standard classification system(SCS) on facilities and inspection data is most important among the things related to maintenance and management to have a efficiently maintenance and management. This paper suggests SCS on facilities and inspection data according to that of facilities. On the basis of SCS of facilities and inspection data, code work with classification system and input work for a data of maintenance and management was practised. The purpose of this paper is to suggest a kind of statistics data and investigate a characteristics of inspection using statistic data on tunnel structures