• Wind and Structures
• /
• v.28 no.2
• /
• pp.99-110
• /
• 2019

Vortex-Induced-Vibration (VIV) is one kind of the wind-induced vibrations, which may occur in the construction and operation period of bridges. This phenomenon can bring negative effects to the traffic safety or can cause bridge fatigue damage and should be eliminated or controlled within safe amplitudes.In the current VIV studies, one available mitigation countermeasure, the horizontal flow-isolating plate, shows satisfactory performance particularly in PI shaped bridge deck type. Details of the wind tunnel test are firstly presented to give an overall description of this appendage and its control effect. Then, the computational-fluid-dynamics(CFD) method is introduced to investigate the control mechanism, using two-dimensional Large-Eddy-Simulation to reproduce the VIV process. The Reynolds number of the cases involved in this paper ranges from $1{\times}10^5$ to $3{\times}10^5$, using the width of bridge deck as reference length. A field-filter technique and detailed analysis on wall pressure are used to give an intuitive demonstration of the changes brought by the horizontal flow-isolating plate. Results show that this aerodynamic appendage is equally effective in suppressing vertical and torsional VIV, indicating inspiring application prospect in similar PI shaped bridge decks.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.2 s.152
• /
• pp.189-197
• /
• 2007

In this paper a study on the construction of a solar boat prototype is presented. Basic components of solar boats and the construction of a simple solar boat prototype by undergraduate students are described. Main purposes of this study are to examine the feasibility of developing commercial solar boats and to evaluate the effect of solar boat construction on the education of students. A low-cost solar boat prototype is constructed by assembling parts available in the market or laboratory. From the prototype construction experience, students obtained basic knowledge on the design and construction of commercial or racing solar boats. In addition, it is shown that the construction of a solar boat can be au effective educational program to expose students to practical multidisciplinary study involving naval architecture, ocean engineering, mechanical engineering, electrical and electronics engineering.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.133-143
• /
• 2014

The purpose of this article is to search stakeholders' recognition related to Fire Construction Surveillance system; a client(order), fire fighting officer, supervision company, construction company, design company, other. The paper provides 4 important things. Firstly, a client(order) suggested the lowest recognition in the needs about the need of separation order, that of contract for any construction work limited registered companies, and that of standard price for engineering.. Secondly, the design company is lowest recognition in guidance and control participating in construction-design phase. Thirdly, the design company is lowest in adjustment about manpower-allocation according to allocation criteria of technical manpower. Fourthly, a client(order) and supervision company are relatively lower than other stakeholder in necessity on special education and training system for auditor in fire protection construction. Almost all related matters are related to more or less stakeholders' interest.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.4
• /
• pp.163-172
• /
• 2008

This study has provided the answer which construction companies to make complete competitive factors for sustainable growth in construction industry with to 21C environment changes. So the purpose of study is to provide a guideline for establishing the strategy of existence and growth. In order to carry out this purpose of study, above all after has been reviewed Quality Management by considering the characteristics of construction companies, TQM(Total Quality Management) component and business performance, the study has been made a close inquiry in causal relationship between TQM component(leadership, education.training, participation) and business performance(quality) in construction industry. The result of the study can be summarized as follows: First, a test was conducted to whether TQM component(participation) has a significantly positive effect on business performance(quality). Second, it was found that there was a positive casual relationship between each of the TQM factors and business performance(quality). TQM factors had great influences on the business performance of construction companies. So construction companies needed to make continuous efforts to enhance the business performance through TQM approach.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.695-698
• /
• 2007

As the world plant market extends, the number of the domestic construction company expansion to the abroad plant market is increasing. However, there is a lack of plant experts for opening domestic and abroad plant market; call in plant experts from abroad. Moreover, domestic plant education programs are not well constructed. And the education programs are not characterized by field, environment, and position. Thus, we should develop contents and establish the foundation for the plant education programs to train appropriate plant experts who will lead the world plant market. The purpose of the study is to develope educational contents for plant experts to be compatible in the abroad plant market. The contents developed by this study may practically used as the fundamental material for the future educational program.

• Journal of the Korean Society of Safety
• /
• v.20 no.1 s.69
• /
• pp.119-125
• /
• 2005

Construction work accidents have not decreased in spite of much effect such as new work methods education and research related to the safety management. Specially, many fatal accidents were mainly caused by unanticipated risk factors in reinforced concrete construction work, which was involved in apartment, building. school church, hotel hospital, bank work and the other works. According to the construction fatal accident book by KOSHA 1,903 workers were killed by the fatal accidents in reinforced concrete construction work during the 13 years$(1992\~2004)$. From these reasons, this study researched the cause of fatal accidents which were happened in reinforced concrete construction work during last 13 years and surveyed construction managers and specialists about risk factors according to the work type in the reinforced concrete construction work. Therefore, this study will suggest the counterplan about the construction safety management and prevent fatal accidents from construction site related to the reinforced concrete construction work.

• Geomechanics and Engineering
• /
• v.34 no.2
• /
• pp.115-124
• /
• 2023

By conducting three-dimensional simulation with consideration of small-strain characteristics of soil stiffness, the effects of excavation geometry and tunnel cover to diameter ratio on deformation mechanisms of an existing tunnel located either at a side of basement or directly underneath the basement were systematically studied. Field measurements were used to verify the numerical model and model parameters. For basement excavated at a side of an existing tunnel, the maximum settlement and horizontal displacement of the tunnel are always observed at the tunnel springline closer to basement and tunnel crown, respectively, regardless of basement geometry. By increasing basement length and width by five times, the maximum movements of tunnel located at the side of basement and directly underneath the basement increase by 450% and 186%, respectively. Obviously, tunnel movements are more sensitive to basement length rather than basement width. For basement excavated at a side of an existing tunnel, tunnel movements at basement centerline become stable when basement length reaches 10 H_e (i.e., final excavation depth). Moreover, tunnel heaves due to overlying basement excavation become stable when the normalized basement length (L/H_e) is larger than 8.0. As tunnel cover to diameter ratio varies from 2.5 to 3.0, the maximum heave and tensile strain of tunnel due to overlying basement excavation decrease by up to 41.0% and 44.5%, respectively. If basement length is less than 8 H_e, the assumption of plane strain condition of basement-tunnel interaction grossly overestimates tunnel movements, and ignores tensile strain of tunnel along its longitudinal direction. Thus, three-dimensional numerical analyses are required to obtain a reasonable estimation of tunnel responses due to adjacent and overlying basement excavations in clay.

• Advances in Computational Design
• /
• v.3 no.4
• /
• pp.405-418
• /
• 2018

Building Information Modelling (BIM) and Discrete Event Simulation (DES) are tools widely used in the context of the construction industry. While BIM is used to represent the physical and functional characteristics of a facility, DES models are used to represent its construction process. Integrating both is beneficial to those interested in the field of construction management since it has many potential applications. Game engines provide a human navigable 3D virtual environment in which the integrated BIM and DES models can be visualised and interacted with. This paper reports the experience obtained while developing a simulator prototype which integrates a BIM and a DES model of a single construction activity within a commercial game engine. The simulator prototype allows the user to visualise how the duration of the construction activity is affected by different input parameters interactively. It provides an environment to conduct DES studies using the user's own BIM models. This approach could increase the use of DES technologies in the context of construction management and engineering outside the research community. The presented work is the first step towards the development of a serious game for construction management education and was carried out to determine the suitable IT tools for its development.

• Journal of the Korea Construction Safety Engineering Association
• /
• s.51
• /
• pp.93-105
• /
• 2010

The object of this study is to understand the psychological factor of the worker on safety and recommend experimental factor of safety education program. The following are the methods of this study. We analyzed the statistical data from survey to workers(N=139) about the psychological factor on safely. The survey consisted of 34 questions about 4 factors like private external characteristic, psychological characteristic, characteristics on behavior, and experience and reason of disaster. As the result of the analysis of the multi regression model on the base of correlation of each of the major factors, psychological health, effort on practicing, and satisfaction on their life were the variables with high influence on the safety mind of workers. So, it is good safety strategy for effective working to maintain healthy life with optimistic minds, and try to practice actively as usual. After considering the result, for the development of safety education program for working, we have to consider psychological factors of our workers that influence their safety and try to improve the experimental education opportunity, and it will be effective.

• Journal of the Korean Society of Safety
• /
• v.30 no.4
• /
• pp.128-134
• /
• 2015

The number of schools which have passed 30 years after the construction takes up 30% (5% falling to class D and E) in Korea. So, the offices of education across the nation conduct large works for the expansion, improvement and renovation of the school. But as the work takes a lot of time, the work is also conducted while the students are studying at the schools. The work at the school causes the noise, dust, vibration as the school often has the reinforced concrete structure. So, as the windows are closed to prevent the nuisance from hampering the education, the problems related to the illumination, ventilation, and control of humidity and temperature are give damages to students studying the school buildings. Actually, as the current renovation or expansion is conducted across the nation due to the implementation of the new education system and the resulting integration and construction of hub school, specialized school, meister school and it causes a lot of nuisance to the learning students and others, there are a lot of complaints from concerned people. Accordingly this study suggests the method of evaluating the factors which affect the learning environment such as the noise, dust or fine dust and reducing the nuisances to the level proper for the learning environment when the existing school is expanded, improved or renovated.