• 한국건설관리학회논문집
• /
• 제12권6호
• /
• pp.42-53
• /
• 2011

2004년 예정가격 산정방법으로 실적공사비 적산제도가 본격적으로 시행되면서 상대적으로 표준품셈 적산제도의 적용이 하락하였다. 그러나 2010년 하반기 예정가격 산정시 표준품셈 적산제도의 적용비중은 45%이며, 여전히 높은 적용비중을 유지하고 있다. 현행 표준품셈은 예정가격의 산정에 과도한 시간이 소요되고, 시공계획과 자원분배에 적용하기 어려운 단점이 있다. 이와 같은 단점을 개선하기 위하여 본 연구에서는 국내외 품셈의 형식을 고찰하여 이를 국내 도로분야 대표공종에 적용하여 기존 품셈을 일단위 작업조 기반 생산성 정보로 산출하여 유사한 조건하에서 일본 미국의 생산성 정보 및 현장자문을 통한 정보와 비교하였다. 본 연구를 통해 적용된 작업조기반 생산성 정보 산출 방법과 산출 정보의 효용성을 확인하고자한다. 이러한 과정을 통하여 표준품셈을 통한 작업조기반 생산성 정보 산정 방법'과 일단위 작업조 기반 생산성 정보를 제시하고자 한다.

• 교육시설 논문지
• /
• 제25권1호
• /
• pp.3-12
• /
• 2018

Educational facilities are more uncertain about maintenance costs due to their comprehensive and long life-cycle compared to commercial buildings. In addition, maintenance of the existing post management system can not maintain the original function of education facilities continuously and economically. In order to overcome this problem, it is necessary to analyze the repair and replacement cost for the uncertainty factor in maintenance. This study propose a model to determine repair and maintenance cost and cycle of educational facility based on probabilistic estimation concept. For the analysis, Monte Carlo simulation, a probabilistic analysis method, was applied based on the repair and maintenance history data of the educational facilities in Florida. The results of this study can be used as a guideline for quantitative facility management and facility management research.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.928-934
• /
• 2009

Although the evolution and deployment of information technologies will undoubtedly play an important role in the current construction industry, many engineers are still unsure of the economic value of using these technologies. Especially for the planning of a construction project, a collaboration system to utilize the whole resources is a essential tool for the successful outcome. A detailed, authoritative, and readily accessible information model is needed to enable engineers to make cost-effective decisions among established and innovative plan alternatives. Most engineers rely on limited private experiences when they create solutions or design alternatives. Initial planning is crucial for the success of the construction project. Most construction projects are done through collaboration of engineers who have different specialized knowledge. Information technologies can dramatically enhance the performance of the collaboration. For the information delivery, we need a mediator between engineers. Object-based 3-D models are useful for the communication and decision assistance for the intelligent project design. In this paper, basic guidelines for the 3-D design according to different construction processes are suggested. Adequate interoperability of 3-D objects from any CAD system is essential for the collaboration. Basic architectures of geometry models and their information layer were established to enable interoperability for design checks, estimation and simulation. A typical international project for roadway was chosen for the pilot project. 3-D GIS model was created and bridge information models were created considering several requirements for planning and decision making of the project. From the pilot test, the integrated construction project planning using 3-D information models was discussed and several guidelines were suggested.

• 동아시아경상학회지
• /
• 제12권1호
• /
• pp.35-42
• /
• 2024

Purpose: A railroad project is a complex system with large construction costs in the initial stage and ongoing operating costs over its lifecycle. Current railroad projects tend to be based on construction options, which leads to huge deficiencies in operating costs. This phenomenon results from a lack of appropriate tools to accurately estimate a railroad project's lifecycle costs. This study attempts to analyze the major components of railroad operating costs and to propose a decision-making system for analyzing the long-term lifecycle costs of railroad projects. Research design, data and methodology: We review the literature and analyze the current status of railroad operating costs in Korea and overseas. Based on previous projects, a framework for project options and operating costs is proposed. The framework is applied to actual railroad projects to demonstrate the validity of the model. Results: Case analysis shows that our framework is comprehensive in analyzing the primary aspects of railroad operating costs and plays an effective role in choosing various railroad project options. This study points out that the railway project operates inefficiently because estimating long-term costs without reflecting specific project options causes many errors. Conclusions: A major contribution of this study is the development of an improved framework for accurately estimating operating costs and providing policymakers and engineering firms with a holistic decision support system. Detailed components in estimating operating costs of the railroad business are discussed. And we present a decision-making tool that policymakers and private businesses can use in planning the railroad business.

• 한국정보전자통신기술학회논문지
• /
• 제15권2호
• /
• pp.178-188
• /
• 2022

탄소중립 달성의 핵심인 분산형 재생에너지의 확산에 따라 발생하는 계통수용성 문제의 해결을 위해 가상발전소의 도입이 활발히 논의되고 있다. 하지만 가상발전소와 같은 신사업은 일반적으로 보상 메커니즘이 존재하지 않아 도입 초기의 경제성 확보가 어렵다. 이에 조기 활성화를 위해서는 보조금을 포함한 적절한 지원이 필요하다. 지원 수준의 결정을 위해서는 비용모델이 필요하나 신사업의 경우 충분한 데이터가 부족한 문제가 있다. 본 연구에서는 국내 전문가를 대상으로 가상발전소 도입에 필요한 요건, 적정 규모와 비용에 대한 설문을 통하여 비용 추정 모델을 도출하였다. 우선 가상발전소의 자원구성 형태가 비용에 미치는 영향을 고려하여 설문조사에 따라 자원구성 시나리오를 설계하였다. 각자의 자원구성 시나리오에 대한 비용추계를 기반으로 로지스틱회귀분석을 통하여 시나리오에 따른 비용 추정 모델을 도출하였다. 가상발전소 규모와 자원구성 시나리오에 따른 사례분석으로 적절한 초기 보상 규모를 비교 분석하였다. 20MW~500MW 규모의 가상발전소에서 중대형 위주와 소형 자원을 포함한 자원구성 시나리오를 적용하였을 때, 중대형 위주의 구성 시 비용이 29~51% 낮게 나타났다.

• 한국농공학회논문집
• /
• 제64권1호
• /
• pp.1-13
• /
• 2022

In Korea, attention is being paid to the use of renewable energy in the livestock industry, and Ground Source Heat Pump (GSHP), which is advantageous for temperature control, is considered as one of the ways to reduce the use of fossil fuels. But GSHP is expensive to install, which proper capacity calculation is required. GSHP capacity is related to its maximum energy load. Energy loads are affected by climate characteristics and time, so dynamic analysis is required. In this study, the optimal capacity of GSHP was calculated by calculating the heating and cooling load of pig farms using BES (Building Energy Simulation) and economic analysis was performed. After designing the inside of the pig house using TRNSYS, one of the commercial programs of the BES technique, the energy load was calculated based on meteorological data. Through the calculated energy load, three heating devices and GSHP used in pig farms were analyzed for economic feasibility. As a result, GSHP's total cost of ownership was the cheapest, but the installation cost was the highest. In order to reduce the initial cost of GSHP, the capacity of GSHP was divided, and a scenario was created in which some of it was used as an auxiliary heating device, and economic analysis was conducted. In this study, a method to calculate the proper capacity of GSHP through dynamic energy analysis was proposed, and it can be used as data necessary to expand the spread of GSHP.

• 한국수소및신에너지학회논문집
• /
• 제14권4호
• /
• pp.348-358
• /
• 2003

According to Electricity Acceleration Law of Rural Area recently, the needs for replacement of a small scale diesel power generation facility which supplied electricity to 10-50 households Remote Islands has been revealed due to high operating and maintenance cost of Diesel Power Generation. Optimization of electric power system for Small Remote Islands must be made considering the economics, reliability and stability as power sources and estimation of total construction cost of those power stations. For its purpose, an assessment of power generation options such as Photovoltaic, Fuel cell, Wind-hybrid was implemented, economic evaluation of power supply shows the Photovoltaic, Fuel Cell for few household's islands and Diesel, Wind-hybrid for more inhabited islands. Power supplied by Diesel shows the best response to increasing electric demand and system reliability even with its lower economic value. Those who are in charge of power planning have to pay attention to system reliability, stability and operating characteristics of candidate's power supply besides its economics.

• 한국건설관리학회논문집
• /
• 제16권4호
• /
• pp.70-79
• /
• 2015

신재생에너지 시스템에 대한 관심이 집중되면서 생애주기비용 분석의 중요성 또한 대두되고 있다. 하지만 LCC분석은 변화하는 환경을 반영하기 힘들며, 특히 분석시점에서의 입력변수(할인율, 인플레이션, 에너지비 등)를 하나의 고정된 값으로 가정하거나 또는 입력변수에 대한 민감도 분석만을 수행함에 따라 변화하는 환경에서 실시간으로 사용자의 의사결정을 지원하기에는 한계가 있다. 이를 위해서는 LCC분석에서의 입력변수의 불확실성뿐만 아니라 운영 유연성을 통합적으로 고려한 새로운 경제성 분석방법론이 요구된다. 따라서 본 연구에서는 신재생에너지 중 태영열난방시스템을 대상으로 미래의 불확실성과 운영상의 유연성을 확보하고 사용자의 전략적 의사결정을 지원하기 위하여 실물옵션을 활용한 LCC분석 개선방안을 제시하였다. 신재생에너지 시스템 중 태양열난방시스템에 대한 LCC 사례분석을 통하여 확정/확률론적 LCC분석 현황과 한계점을 분석하고, 이를 기반으로 실물옵션 기반 생애주기비용 분석방법을 제안하였으며, 분석결과 기존 LCC분석 결과와 달리 유가상승을 전제하에 태양열난방시스템이 기름보일러보다 경제성이 높은 것으로 분석되었다. 최종적으로 본 연구에서 제시한 실물옵션 기반 생애주기비용은 불확실한 상황과 그에 따른 운영 유연성을 동시에 고려함으로써, 신재생에너지 시스템뿐만 아니라 다양한 대안평가에서도 합리적인 의사결정을 지원할 수 있을 것으로 기대된다.

• Advances in Computational Design
• /
• 제4권2호
• /
• pp.179-196
• /
• 2019

Temporary scaffold systems in the construction site play an important role for ensuring the safety of the workers and for constructing the stable structures. To assemble the scaffold, the pipe scaffolding system, the wedge binding scaffolding system and the particular materials have been utilized. To design the material arrangement of a scaffold, firstly the configuration was determined considering the construction geometry. Then, the strength of the scaffold was confirmed and the quantity of the material was accounted. In this paper, the design method of the temporary scaffold was proposed for intending the semi-automatic procedure. In the proposed design method, the geometric design and the safety requirement were specified by the safety standard and the design flow was followed by the designer's knowledge. The size and the quantities of the materials were calculated by referring to the relation between the scaffold and the constructing structure. In the calculating procedure, three dimensional positions of each scaffold materials were calculated and recorded simultaneously. Then, three dimensional scaffold structural was drawn semi-automatically on the CAD software by using the obtained material sizes, positions and directions. The proposed design method provides us the precise quantities of scaffold materials and enables us to reduce the design effort and the cost estimation processes. In addition, the obtained results can be applied to BIM software after converting to IFC format.

• 자원리싸이클링
• /
• 제17권2호
• /
• pp.55-62
• /
• 2008

산업화 과정에서는 항상 폐기물이 발생하며 그 양은 점차 증가하고 있다. 2003년 생활 및 사업장 폐기물은 전년대비 9.5%의 증가추이를 보인 반면, 건설 폐기물은 전년대비 21.0%의 높은 증가 추이를 보였다. 현재 전체폐기물 중 건설 폐기물은 50%에 육박하며, 그 중에서도 폐콘크리트와 폐아스콘이 73%를 차지하고 있다. 이에 더하여 지금까지 풍부한 천연자원으로만 여겨졌던 골재의 양이 점차 줄어들고 있어, 건설 폐기물 재활용의 필요성은 더욱 강조되고 있다. 재생골재의 활용은 막대한 건설폐기물의 처리를 용이하게 함과 동시에 골재채취로 인한 환경파괴는 물론 부족한 신규골재를 대체할 수 있는 효과를 가진다. 본 연구는 건설 폐기물중 배출량이 상대적으로 많은 폐아스콘을 중심으로 재활용 경제성 분석을 위해 비용/편익 모형을 사용하였으며, 신규골재와 재생골재간의 비용 비교만을 수행하였다. 이 식을 이용하여 2003년과 2004년을 기준으로 한, 수도권 지역 내 아스콘에 대한 재활용 경제성을 평가해 본 결과, 2003년의 0.0694보다 2004년이 0.0805로 더 높게 나타났다. 두 자료만으로 결론을 내릴 수 없으나, 이는 건설부문에서 아스콘의 재활용 가치가 높아짐을 반증하고 있다고 사료된다.