• 대한안전경영과학회지
• /
• 제18권2호
• /
• pp.29-36
• /
• 2016

This study of small & Medium-Sized construction sites construction disaster prevention technology conduction-site visits from the map results report by the inspector on-site advice and technical guidance for the analysis of deficiencies and potential construction of disaster revealed the potential factors causing an accident as follows. As a results, Should not be a once a month visits. Therefore should be changed at least twice a month to help prevent accidents of this system is to be judged.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.109-112
• /
• 2007

As buildings become higher, larger, and more complex, safety issues for construction workers working at such environments become more important. We analyzed 140 critical accident cases reported to the KOSHA(Korea Occupational Safety & Health Agency) for construction cranes and lifts by types of cranes and by patterns of accidents and causes. By finding out the accident's types and causes, we expect to develop an efficient measure for preventing similar accidents in the near future. The cases will be studied further and reexamined using the FMEA(Failure Mode and Effect Analysis) as a quantitative analysis method.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.188-192
• /
• 2007

This paper presents a current perspective on advanced fusion research trends in the construction industry as reflected in the proceedings of International Symposium on Automation and Robotics in Construction (ISARC) which has focused on advanced fusion technology in last decades. The paper reports the results of a 7-year analysis of papers between 2000 and 2006. The analysis focused on such data as research topics of the proceedings. The paper summarizes the data extracted from the paper and uses it to analyze advanced fusion research trends. The research result shows that the top research topics in advanced fusion research areas are construction robots and automation and intelligent construction management. The research also found that research related to advanced fusion technology is increasing throughout the world and topics are changing as current needs change.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.980-983
• /
• 2008

KICT has been carrying out inventory research on the cut slopes of national roads. Inventory research results are basic data used in cut slope management system. Inventory data are classified by general status, cut slope characteristics and inspector opinion. Cut slope inventory data are utilized to figure out dangerous slopes and decide survey ranking of detailed safety diagnostication. This paper will draw dangerous cut slope and more important inventory data in Chungcheongdo via correlation analysis.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.155-160
• /
• 2010

In this study, detailed assessment for durability performance were performed on the chloride protected concrete structures to investigate the effectiveness of chloride protection. And economical efficiency for the chloride protected concrete structures were studied by LCC(Life Cycle Cost) analysis. In the comparison result of the first section repair time, it was found that the chloride protected concrete structures was economical better than the non-protected concrete structures in the long term. According to the analysis result of the accumulated chloride concentration by used time and chloride ion concentration by depth, it can be seen that the permeation through time from chloride has increased two times in the chloride protected concrete structures.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.127-130
• /
• 2009

Recently agricultural productivity innovation projects are increasing all over the farming countries. To reform and improve the productivity of agricultural industry is important factors. This research is to do the functional Analysis for P-C-M support System Design in Agricultural Facilities. By analyzing the for P-C-M support System modules in the agricultural construction process, P-C-M support System factors are derived and defined. The result of this study would widely be used as a fundamental research guide to develop the agricultural P-C-M support System in the agricultural construction process.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.941-946
• /
• 2008

D&B method in tunnel construction requires accurate and rapid measurement of the ground movement, which of essential for feedback analysis. Recently, survey technique adapting IT is getting more and more emphasized in the field of construction and tunnel survey also follow the same trend. Case study and adaptability of IT technique for tunnel survey will be discussed in this study. The application of laserscannig method in the field of tunnel construction was reported in several advanced country including Austria and Japan. Survey for the crown and shoulder movements by IT survey method was conducted and the results were compared to those do the conventional method. The pipe-roof, grouting, ring-cut are installed in the this site to prevent expected large ground settlement. The result show that laserscanner system is prefered rather than conventional method in that better understanding for the displacement condition and origin condition was liable by the lasersacnnig method. IT survey solution makes if possible to execute more economic and safe construction.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.248-249
• /
• 2021

Planning and Scheduling in Korean has been developed from Bar Chart to CPM, integrated management and EVM were attempted. As growing of overseas projects, Scheduler was also recognized as important one. However, the reality is that most Korean construction projects still remain in the preparation of construction plan and construction schedule in 1990s. The global Planning and Scheduling trend is EOT claims. I would like to understand the global trend of EOT claims and EOT analysis, and to find out Planning and Scheduling measures to successfully promote EOT claims.

• 한국콘텐츠학회논문지
• /
• 제20권8호
• /
• pp.19-33
• /
• 2020

본 연구의 목적은 빅데이터 분석 기법을 이용하여 세종시 건설 계획에 대한 여론 변화를 분석하는 것이다. 연구 자료는 세종시 건설 계획과 관련된 한겨레와 동아일보, 한국일보 등 언론사의 신문기사이다. 세종시 건설 계획은 신행정수도, 행정중심복합도시, 세종시 수정안 등 3개 시기로 구분되었다. 분석 방법은 파이썬과 Gephi 0.9.2 프로그램을 활용한 빈도분석, 감성분석, 사회연결망분석이다. 세종시 건설에 따라 각 신문사의 쟁점에 대한 변화가 있었다. 첫째, 빈도분석 결과, 한겨레의 키워드는 세종시 건설 시기에 따라 찬성-찬성-반대의 특성을 나타내고 있었다. 동아일보는 반대-반대-찬성의 입장을 갖는 것으로 분석되었다. 한국일보는 반대-찬성-반대 경향을 갖는 것으로 분석되었다. 둘째, 감성분석 결과, 각 언론사는 논조의 특성이 변화되고 있었다. 한겨레는 긍정-긍정-부정 논조 특성을 보이고 있었고, 동아일보는 부정 - 부정 - 긍정으로 변화되었다. 한국일보는 부정-긍정-부정으로 변화되었다. 셋째, 사회연결망분석 결과는 다음과 같다. 각 언론사는 세종시 건설 시기에 진보와 보수, 중도 등 정치적, 이념적 특성에 따라 변화를 보이고 있었다. 한겨레는 지역균형발전에 초점을 맞추고 있었으며, 동아일보는 보수의 의견을 대변하고 있었다. 한국일보는 세종시 건설 시기에 여·야가 대립하는 이슈에 대해 부각 시키고 있었다.

• 한국안전학회지
• /
• 제35권2호
• /
• pp.55-60
• /
• 2020

The purpose of this study is to analyze the influence of the economic and workforce factors on the annual number of occupational accident fatalities occurring at the construction sites. The considered variables of the economic factor are the amount of economic losses caused by industrial accidents, the GDP, and the total monthly wage for each economically active population. And, the variables related to the workforce factor are the number of economically active population, the number of female economically active population, and the number of labor union members. The multiple regression analysis was conducted to determine the effect of two factors on the total number of occupational fatalities in the construction industry. The results show that GDP among considered variables in the economic factor had a statistically significant negative relationship with the number of the construction accident fatalities in the construction industry. Among variables related to the workforce factor, economically active population showed a statistically significant negative relationship with the number of the construction accident fatalities.