• 한국자동차공학회논문집
• /
• 제2권6호
• /
• pp.87-93
• /
• 1994

This paper describes on the establishment of an optimal internal grinding conditions for the purpose of improving the grinding efficiency against to the high-speed grinding. Through the fundamental grinding tests for the brittle and hardened material, we are concluded that high-speed internal grinding is effective to improve the grinding accuracy as well as the grinding efficiency. The obtained results are as follows: (1) Under the speed ratio $(V_w/V_g)$ is constant, it is possible to increase the grinding efficiency with satifying the constraint conditions. (2) Increasing the wheel velocity, surface roughness and out-roundness are improved. (3) Under the wheel depth of cut is constant and increasing the speed ratio, workpiece residual stress is decreased. The described method, in this paper, is capable of determining the optimum internal grinding conditions taking into account some constraint conditions, and practical algorithm for optimum internal grinding conditions are presented.

• 한국소음진동공학회논문집
• /
• 제21권1호
• /
• pp.66-73
• /
• 2011

This paper deals with free vibrations of the tapered beams with the constant surface area. The surface area of the objective beams are always held constant regardless shape functions of the cross-sectional depth. The shape functions are chosen as the linear and parabolic ones. Ordinary differential equations governing free vibrations of such beams are derived and solved numerically for determining the natural frequencies. In the numerical examples, hinged-hinged, hinged-clamped and clamped-clamped end constraints are considered. As the numerical results, the relationships between non-dimensional frequency parameters and various beam parameters such as section ratio, surface area ratio, end constraint and taper type are reported in tables and figures. Especially, section ratios of the strongest beam are calculated, under which the maximum frequencies are achieved.

• 대한의용생체공학회:의공학회지
• /
• 제9권2호
• /
• pp.153-158
• /
• 1988

A three-dimensional surface is reconstructed from contour information as identified on two-dimensional computed tomographic slices. Gradient operator with curvature constraint would be applied to extract the contour automatically, and backtracking is also adopted to reduce the tracking error. The surface between the consecutive slice is efficiently reconstructed using a triangular surface tiles. Hidden surface elimination, shading and parallel projection of the reconstructed surface are provied on the display screen.

• 소성∙가공
• /
• 제10권3호
• /
• pp.179-184
• /
• 2001

The influence of the fatigue crack propagation by shot peening was studied in this paper. Fatigue tests were carried out on the unpeened and shot peened CT specimens. The changes of mechanical properties, residual stress, fatigue fracture surface etc. by shot peening were investigated. The mechanical properties, residual stress, fatigue surface etc. by shot peening were investigated. The mechanical peened specimen improved in fatigue life up to 14% by shot peening. The reason of increase in the fatigue life was closely related with the compressive residual stress, which was 519.7MPa on surface. Another reason was the constraint on crack opening on surface region, it is due to the decrease in slope of crack propagation direction.

• 한국지능시스템학회논문지
• /
• 제20권6호
• /
• pp.748-754
• /
• 2010

깨어진 항아리 조각들을 가상 공간에서 조립하기 위하여 조각 표면을 이용한 빠른 3차원 회전축 추정 방법을 제안한다. 물체의 원형성과 표면의 국지적 평면성을 이용하여 대칭축을 찾는 방법을 사용한다. 항아리 조각 같은 회전축 대칭 물체는 반지름이 다른 여러 원통의 중첩으로 생각될 수 있다. 각 원통의 원형성을 회전축 계산에 이용한다. 먼저, 표면 위 임의의한 점을 지정하고 그 점을 통과하는 여러 개의 원통상의 궤도를 각각의 곡률의 변화를 측정 검사하여 조사한다. 올바른 원의 궤도는 곡률의 변화가 없을 것이므로 가장 작은 곡률의 변화가 원의 궤도로 선택된다. 또한 원의 중심점으로 축이 통과하는 경로가 되므로 원의 중심점이 축의 위치가 된다. 표면의 국지적 평면성과 프로파일 곡선 근사를 통한 축 위치 추정 방법 또한 연구 되었다. 제안된 방법은 기존의 방법에 비해 계산 속도가 향상되었고 조각의 부위에 영향을 받지 않는 강건성을 가짐을 실험적으로 입증하였다.

• 소성∙가공
• /
• 제9권3호
• /
• pp.304-312
• /
• 2000

An inverse finite element approach is employed to efficiently design the optimum blank shape and intermediate shapes from the desired final shape in multi-stage elliptic cup drawing processes. The multi-stage deep-drawing process is difficult to design with the conventional finite element analysis since the process is very complicate with the conventional finite element analysis since the process is very complicated with intermediate shapes and the numerical analysis undergoes the convergence problem even with tremendous computing time. The elliptic cup drawing process needs much effort to design sine it requires full three-dimensional analysis. The inverse analysis is able to omit all complicated and tedious analysis procedures for the optimum process design. In this paper, the finite element inverse analysis provides the thickness strain distribution of each intermediate shape through the multi-stage analysis. The multi-stage analysis deals with the convergence among intermediate shapes and the corresponding sliding constraint surfaces that are described by the analytic function of merged-arc type surfaces.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.176-182
• /
• 1999

This paper presents a new autonomous kinematic calibration technique by using a laser-vision sensor called "Perceptron TriCam Contour". Because the sensor measures by capturing the image of a projected laser line on the surface of the object, we set up a long, straight line of a very fine string inside the robot workspace, and then allow the sensor mounted on a robot to measure the point intersection of the line of string and the projected laser line. The point data collected by changing robot configuration and sensor measuring are constrained to on a single straght line such that the closed-loop calibration method can be applied. The obtained calibration method is simple and accurate and also suitable for on-site calibration in an industrial environment. The method is implemented using Hyundai VORG-35 for its effectiveness.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.192-192
• /
• 2000

In this paper, a platoon merging is considered as a remote-controlled system with the state represented by a stochastic process. In this system, it becomes to encounter situations where a single decision maker controls a large number of subsystems, and observation and control signals are sent over a communication channel with finite capacity and significant transmission delays. Unlike classical estimation problem in which the observation is a continuous process corrupted by additive noise, there is a constraint that the observation must be coded and transmitted over a digital communication channel with finite capaci쇼. A recursive coder-estimator sequence is a state estimation scheme based on observations transmitted with finite communication capacity constraint. Using the coder-estimator sequence, the remote control station designs a feedback controller. In this paper, we introduce a stochastic model for the lead vehicle in a platoon of vehicles considering the angle between a road surface and a horizontal plane as a stochastic process. The simulation results show that the inter-vehicle distance and the deviation from the desired inter-vehicle distance are well regulated.

• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.73-81
• /
• 1996

This paper presents a general procedure for the selection of the machining parameters for a given machine which provides the maximum material removal rate using a Genetic Algorithms(GAs). Some constraints were given in order to achieve desired surface integrity and cutting tool life conditions as wel as to protect machine tool. Such a constrained problem can be transformaed to unconstrained problem by associating a penalty with all constraint violations and the penalties are included in the function evaluation. Genetic Algorithms can be used for finding global optimum cutting conditions with respect to the above cost function transformed by pennalty function method. From the demonstration of the numerical results, it was found that the near optimal conditions could be obtained regardless of complex solution space such as cutting environment.

• International Journal of Advanced Culture Technology
• /
• 제7권2호
• /
• pp.168-178
• /
• 2019

In this paper I discuss a more complicated case of 'It'-Extraposition in English in the Optimality Theory [1] by further modifying and extending the analysis done in Khym (2018) [2] in which only the 'relatively' simple cases of 'It'-Extraposition such as 'CP-Predicate' was dealt with. I show in this paper that the constraints and the constraint hierarchy developed to explain the 'relatively' simple cases of 'It'-Extraposition are no longer valid for the more complicated cases of 'It'-Extraposition in configuration of 'CP-V-CP'. In doing so, I also discuss two important theoretic possibilities and suggest a new view to look at the 'It'-Extraposition: first, the long-bothering question of which syntactic approach between P&P (Chomsky 1985) [3] and MP (Chomsky 1992) [4] should be based on in projecting the full surface forms of candidates may boil down to just a simple issue of an intrinsic property of the Gen(erator). Second, the so-called 'It'- Extraposition phenomenon may not actually be a derived construction by the optional application of Extraposition operation. Rather, it could be just a representational construction produced by the simple application of 'It'-insertion after the structure projection with 'that-clause' at the post-verbal position. This observation may lead to elimination of one of the promising candidates of '$It_i{\ldots}[_{CP}that{\sim}]_i$' out of the computation table in Khym [2], and eventually to excluding the long-named 'It'-Extraposition case from Extrsposition phenomena itself. The final constraints and the constraint hierarchy that are explored are as follows: ${\bullet}$ Constraints: $^*SSF$, AHSubj, Subj., Min-D ${\bullet}$ Constraint Hierarchy: SSF<<>>Subj.>> AHSubj.