• Journal of the Korean Solar Energy Society
• /
• v.34 no.1
• /
• pp.81-90
• /
• 2014

The Jeju-Korea power system is a small-sized network with a system demand ranging from a autumn minimum of 350MW to a summer peak of 716MW. Because Jeju island is well exposed to north-east winds with high speed, applications to connect to Jeju power system are flooded. Considering physical/environmental constraints, Jeju Self-governing Province has also target for the wind power capacity of 1,350MW by 2020. It amounts to two or three times of Jeju average-demand power and wind power limit capacity announced by Korea Power Exchange (KPX) company. Wind farm connection agreements will be signed to maximize utilization of wind resource. In spite of submarine cable HVDC connected to Korea mainland, Jeju power system is independently operated by frequency and reserve control. This study reevaluates wind power limit based on the KPX criteria from 2016 to 2020. First of all wind power generation limit are affected by off-peak demand in Jeju power system. Also the possibility capacity rate of charging wind power output is evaluated by using energy storage system (ESS). As a result, in case of using 110MWh ESS, wind power limit increases 33~55MW(30~50% of ESS), wind power constraint energy decreases from 68,539MWh to 50,301MWh and wind farm capacity factor increases from 25.9 to 26.1% in 2020.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1B
• /
• pp.71-79
• /
• 2003

As the traffic grows rapidly in the Internet, the QoS guarantee of the flows and the traffic engineering problems have become very important issues. MPLS has more advantages to solve the problems than existing IP routing because of its use of multiple paths between the source and destination pairs Particularly, the availability of Constraint-based Shortest Path First(CSPF) algorithm and explicit route in MPLS made the problem referred above to be solved efficiently. However, the CSPF algorithm has the characteristic of selecting the shortest path of all paths which meet the traffics' QoS constraints Therefore, even though there are alternative paths to route traffic, alternate QoS paths may not be found and best-effort traffic will be dropped during congestion period In this paper, we present the network resource optimization method related to the traffic engineering by using load balancing through routing in MPLS network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2B
• /
• pp.80-90
• /
• 2006

WSN(Wireless Sensor Network) performs to detect and collect environmental information for one purpose. As examples, WSN is applicable for home network, patient management of a hospital, logistics management, status detection during the war and so on. The WSN is composed of a sink node and several sensor nodes and has a constraint in an aspect of energy consumption caused by limited battery resource. So many required mechanisms in WSN should consider the remained energy condition. A routing mechanism is requested to deliver the collected information to a sink considering energy efficiency in WSN. There have been many researches to establish (a) route(s) for data delivery to the sink. In this paper, we propose establishment of efficient routes. We proposed a uniform routing mechanism together with considering energy efficiency. For the routing, we define energy probability as routing metrics information and Performs suppression of exchange of control messages. In addition, we derive to uniformly consume the energy of the sensor node when establishing the routes. Also, we evaluate and analyze the energy efficiency for proposed mechanisms through NS-2 simulator.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.375-386
• /
• 2016

Most existing studies on broadcast services in orthogonal frequency division multiplexing (OFDM) systems have focused on how to allocate the transmission power to the subcarriers. However, because a broadcasting system must guarantee quality of service to all users, the performance of the broadcast service dominantly depends on the channel state of the user who has the lowest received signal-to-noise ratio among users. To reduce the effect of the worst user on the system performance, we propose a joint delivery scheme of unicast and broadcast transmissions in OFDM systems with broadcast and unicast best-effort users. In the proposed joint delivery scheme, the BS delivers the broadcast information using both the broadcast and unicast subcarriers at the same time in order to improve the performance of the broadcast service. The object of the proposed scheme is to minimize the outage probability of the broadcast service while maximizing the sum-rate of best-effort users. For the proposed joint delivery scheme, we develop an adaptive power and subcarrier allocation algorithm under the constraint of total transmission power. This paper shows that the optimal power allocation over each subcarrier in the proposed scheme has a multi-level water filling form. Because the power allocation and the subcarrier assignment problems should be jointly solved, we develop an iterative algorithm to find the optimal solution. Numerical results show that the proposed joint delivery scheme with adaptive power and subcarrier allocation outperforms the conventional scheme in terms of the outage probability of the broadcast service and the sum-rate of best-effort users.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.9
• /
• pp.1544-1572
• /
• 2011

Task placement and scheduling are traditionally studied in following aspects: resource utilization, application throughput, application execution latency and starvation, and recently, the studies are more on application scalability and application performance. A methodology for task placement and scheduling centered on tasks based on virtual machines is studied in this paper to improve the performances of systems and dynamic adaptability in applications development and deployment oriented parallel computing. For parallel applications with no real-time constraints, we describe a thought of feature model and make a formal description for four layers of task placement and scheduling. To place the tasks to different layers of virtual computing systems, we take the performances of four layers as the goal function in the model of task placement and scheduling. Furthermore, we take the personal preference, the application scalability for a designer in his (her) development and deployment, as the constraint of this model. The workflow of task placement and scheduling based on virtual machines has been discussed. Then, an algorithm TPVM is designed to work out the optimal scheme of the model, and an algorithm TEVM completes the execution of tasks in four layers. The experiments have been performed to validate the effectiveness of time estimated method and the feasibility and rationality of algorithms. It is seen from the experiments that our algorithms are better than other four algorithms in performance. The results show that the methodology presented in this paper has guiding significance to improve the efficiency of virtual computing systems.

• Applied Microscopy
• /
• v.51
• /
• pp.18.1-18.12
• /
• 2021

Hair, having distinct stages of growth, is a dynamic component of the integumentary system. Nonetheless, derangement in its structure and growth pattern often provides vital clues for the diagnosis of systemic diseases. Assessment of the hair structure by various microscopy techniques is, hence, a valuable tool for the diagnosis of several systemic and cutaneous disorders. Systemic illnesses like Comel-Netherton syndrome, Griscelli syndrome, Chediak Higashi syndrome, and Menkes disease display pathognomonic findings on hair microscopy which, consequently, provide crucial evidence for disease diagnosis. With minimal training, light microscopy of the hair can easily be performed even by clinicians and other health care providers which can, thus, serve as a useful tool for disease diagnosis at the patient's bedside. This is especially true for resource-constrained settings where access and availability of advanced investigations (like molecular diagnostics) is a major constraint. Despite its immense clinical utility and non-invasive nature, hair microscopy seems to be an underutilized diagnostic modality. Lack of awareness regarding the important findings on hair microscopy may be one of the crucial reasons for its underutilization. Herein, we, therefore, present a comprehensive overview of the available methods for hair microscopy and the pertinent findings that can be observed in various diseases.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.2
• /
• pp.68-77
• /
• 2006

The heartwood of cengal (Neobalanocarpus heimii) is known to have a high degree of decay resistance by virtue of its high extractive content. After 30 years in ground contact an utility pole of this tropical hardwood was found to be degraded only in the surface layers by cavity-forming soft rot fungi. The present work was undertaken 1) to characterize the degradation of cengal heartwood from the aspect of ultrastructure and chemistry and 2) to investigate the correlation between soft rot decay and its extractive microdistribution in wood tissues. The chemical analysis of cengal heartwood revealed the presence of a high amount of extractives as well as lignin. The wood contained a relatively high amount of condensed lignin and the guaiacyl units. Microscopic observations revealed that vessels, fibers and parenchyma cells (both ray and axial parenchyma) all contained extractives in their lumina, but in variable amounts. The lumina of fibers and most axial parenchyma were completely or almost completely filled with the extractives. TEM micrographs showed that cell walls were also impregnated with extractives and that pit membranes connecting parenchyma cells were well coated and impregnated with extractives. However, fungal hyphae were present in the extractive masses localized in cell lumina, and indications were that the extractives did not completely inhibit fungal growth. The extent of cell wall degradation varied with tissue types. The fibers appeared to be more susceptible to decay than vessels and parenchyma. Middle lamella was the only cell wall region which remained intact in all cell types which were severely degraded. The microscopic observations suggested a close correlation between extractive microdistribution and the pattern and extent of cell wall degradation. In addition to the toxicity to fungi, the physical constraint of the extractive material present in cengal heartwood cells is likely to have a profound effect on the growth and path of invasion of colonizing fungi, thus conferring protection to wood by restricting fungal entry into cell walls. The presence of relatively high amount of condensed lignin is also likely to be a factor in the resistance of cengal heartwood to soft rot decay.

• The KIPS Transactions:PartA
• /
• v.17A no.3
• /
• pp.127-136
• /
• 2010

A wireless sensor network(WSN) which roles as a mediator between living environment and computers in ubiquitous computing is very essential research area. Due to the constraint that sensor nodes should work in very resource-restricted circumstances, an operating system that can manage resources effectively is demanded. Also, a sensor network should be able to deal with many events quickly and simultaneously in order to respond to various physical changes in outer environment. The Sensor Network Operating System such as TinyOS, MANTIS and NanoQplus is much designed so that it can satisfy such requirement. But, for programmers who develop application program for sensor networks, they have lack of frameworks which the development is easily possible from restricted development environment. In this paper for this, we implemented a state machine framework apt for responsive systems in NanoQplus which is multi-thread-based sensor network operating system. In addition we propose an event broker module(EBM) for effective event dispatching, a message data structure for message sharing among state machines, and an execution module that handles messages and their queue and performs state transition of the machines. Furthermore, we could do the development more easily an application program with a state-based framework by developing CASE tools.

• Journal of Broadcast Engineering
• /
• v.10 no.4 s.29
• /
• pp.528-539
• /
• 2005

The H.264 has been adopted as the video codec for various multimedia services such as DMB and next-generation DVD because of its superior coding performance. However, the reference codec of the standard, the joint model (JM) contains quite a few algorithms which are too complex to be used for the resource-constraint embedded environment. This paper introduces very low-complexity H.264 encoding algorithm which is applicable for the embedded environment. The proposed algorithm was realized by restricting some coding tools on the basis that it should not cause too severe degradation of RD-performance and adding a few early termination and bypass conditions during the motion estimation and mode decision process. In case of encoding of 7.5fps QCIF sequence with 64kbpswith the proposed algorithm, the encoder yields worse PSNRs by 0.4 dB than the standard JM, but requires only $15\%$ of computational complexity and lowers the required memory and power consumption drastically. By porting the proposed H.264 codec into the PDA with Intel PXA255 Processor, we verified the feasibility of the H.264 based MMS(Multimedia Messaging Service) on PDA.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.357-370
• /
• 2011

Using strategy group theory, this thesis reviewed the status of program providers analysis and the performances it has made so far, and sought measures to improve its limitations. The constraint of program providers analysis based on existing concept of strategy group is that the strategy group was derived from the statistics, and therefore only applied the characteristics of program provider's channels to the analysis, on account of which a systematic and sophisticated classification as well as generalization of strategy or strategy group were hard to obtain. Moreover, the PP strategy variables used to be selected at the firm level and business level, and in relation with resource and competition scope. In future, more appropriate procedure should be followed to obtain objectivity in selecting variables to avoid controversy over intentionality. The measures in this thesis to improve the study of PP strategy group can be summarized as follows: firstly analysis of variables for strategy group classification should be made to single out key variables which are to be classification criteria. Secondly, variables are to be cross-checked by industry experts to increase generalizability. Thirdly, proxy variables should be sublated, and strategy group model which enables the reflection of subsistent properties of PP industry, and the cognitive perception of the executives(CEO) needs to be established. Fourthly, the concepts of mobility barrier and isolating mechanism should be applied to the classification criteria of strategy group to reveal the gap of performance between different strategy groups. Lastly, chronicle study on PP strategy group should be done to perceive the dynamic changes of PP strategy group.