• 제목/요약/키워드: Constant rate

검색결과 4,798건 처리시간 0.032초

CRS 압밀시험에 의한 점성토의 팽창특성에 관한 연구 (The Swelling Characteristics of Clayey Soil by CRS Consolidation Test)

  • 이응준;한상재;김지용;김수삼
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 가을 학술발표회 논문집
    • /
    • pp.335-342
    • /
    • 2000
  • In this study, the swelling characteristics of reconstituted clayey soil were investigated by STD and CRS test. The strain rate during loading was constant i.e. 0.05 %/min, 0.03 %/min and during unloading was varied in proportion to 1/1, 1/5, 1/10 and 1/15 of strain rate during loading. From this study the following conclusions were obtained; (1) There were similar values, especially, during unloading in case of 1/10 or 1/15 of strain rate during loading and the test results between STD and CRS were much to be alike. (2) The cross point of effective stress versus excess pore water pressure ratio curve, was increased during unloading, while the stress level of the cross point was decreased. The stress level can be separated into two zones according to the swelling index named Cs1 and Cs2. From the test results, the values of Cs1 were approximately constant irrespective of strain rate during unloading, but the values of Cs2 were much influenced by strain rate. (3) In CRS consolidation tests, it was found that unloading strain rate did not affect on the existence of zone.

  • PDF

단기간 생물농축계수의 측정에 있어서 실험어류의 종에 따른 차이 (Difference in Species of Test Fish on the Determination of Short-term Bioconcentration Factor)

  • 민경진;차춘근;전봉식;김근배
    • 한국환경보건학회지
    • /
    • 제24권1호
    • /
    • pp.24-31
    • /
    • 1998
  • This study was performed to investigate the difference in species of test fish on the determination of short-term bioconcentration factor in zebrafish(Brachydanio rerio), red sword tail(Xiphophorus hellieri) and goldfish(Carassius auratus). Experimental concentrations of carbamates were 0.05 and 0.10 ppm and chlorothalonil were 0.005 and 0.01 ppm for 3 and 5 days, respectively. This paper reports the measured BCF value on pesticides in various species of test fish, under steady state, and examined correlation between the BCF value and depuration rate constant or LC$_{50}$ or lipid content. Carbamates and chlorothalonil concentration in fish extract and BCF of carbamate and chlorothalonil were increased as incresing test concentration. Carbamates concentration in fish extract and BCF of carbamate were decreased as incresing test period, but chlorothalonil concentration in fish extract and BCF of chlorothalonil were increased as prolonging test period. Determined pesticide concentration in fish extract and BCF were highest in red sword tail, and followed by goldfish, and zebrafish. Determined depuration rate constant were highest in zebrafish, and followed by goldfish, and red sword tail. 96hr-LC$_{50}$ were highest in red sword tail, and followed by zebrafish, and goldfish. Lipid compositions were highest in red sword tail, and followed by goldfish, and zebrafish. Therefore, it is suggested that the difference of BCF between each pesticide due to those of lipid composition of fish and deputation rate constant, while LC$_{50}$ have no effect on BCF.

  • PDF

수신기 다양성과 일정 오경보 확률 방법을 쓴 부호획득: 2. 벼균질 감쇄 환경 (Code Acquisition with Receive Diversity and Constant False Alarm Rate Schemes: 2. Nonhomogeneous Fading Circumstance)

  • 권형문;강현구;박주호;안태훈;이성로;송익호
    • 한국통신학회논문지
    • /
    • 제31권7C호
    • /
    • pp.725-734
    • /
    • 2006
  • 이 논문의 1부에 이어, 수신안테나 다양성을 쓰는 직접수열 부호분할 다중접속(direct-sequence code division multiple access: DS/CDMA) 시스템에서 의사잡음(pseudonoise: PN) 부호를 획득할 때 평균값(cell average: CA), 큰값(greatest of: GO), 작은값(smallest of: SO) 일정 오경보 확률(constant false alarm rate: CFAR) 처리기의 성능 특성을 비균질 (nonhomogeneous) 잡음 환경에서 얻고 견주어 본다. 균질 잡음 환경에서와는 다르게, 비균질 잡음 환경에서는 큰값 일정 오경보 확률 처리기가 가장 성능이 좋고, 평균값 일정 오경보 확률 처리기가 그 다음으로 성능이 좋다는 것을 볼 수 있다.

일정하중 및 일정$C_t$에서 로터강의 크리프 균열전파특성 (Creep Crack Growth Properties of Rotor Steel under Constant Load and $C_t$ Condition)

  • 정순억;이헌식;김영대
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집A
    • /
    • pp.501-506
    • /
    • 2001
  • The creep crack growth properties in 3.5NiCrMoV steel were investigated at $550^{\circ}C$ by using CT specimen under constant $C_t$ condition that was held during crack growth of 1mm distance. $C_t$ lely on load line displacement rate and $C^*$ usually increase with crack length though load is reduced in order to maintain constant $C_t$ value as crack growth. Fully coalesced area(FCA) ahead of crack tip tend to increase as $C_t$ increase to the critical value, and after that value FCA decrease. For the tertiary creep stage of crack growth test, the most of displacement is due to the steady state creep, except only small part due to the primary creep and other effects. Therefore, tests were mainly interrupted in the tertiary stage to obtain high value of $C_t$. At constant load and $C_t$ region, crack growth slope was 0.900 and 0.844 each, on the other hand $C^*$ slope was 0.480.

  • PDF

AN ECONOMIC PRODUCTION QUANTITY INVENTORY MODEL INVOLVING FUZZY DEMAND RATE AND FUZZY DETERIORATION RATE

  • De, Sujit-Kumar;A. Goswami;P.K. Kundu
    • Journal of applied mathematics & informatics
    • /
    • 제12권1_2호
    • /
    • pp.251-260
    • /
    • 2003
  • Generally, in deriving the solution of economic production quantity (EPQ) inventory model, we consider the demand rate and deterioration rate as constant quantity. But in case of real life problems, the demand rate and deterioration rate are not actually constant but slightly disturbed from their original crisp value. The motivation of this paper is to consider a more realistic EPQ inventory model with finite production rate, fuzzy demand rate and fuzzy deterioration rate. The effect of the loss in production quantity due to faulty/old machine have also been taken into consideration. The methodology to obtain the optimum value of the fuzzy total cost is derived and a numerical example is used to illustrate the computation procedure. A sensitivity analysis is also carried out to get the sensitiveness of the tolarance of different input parameters.

The Decomposition of Leaf Litters of Some Tree Species in Temperate Deciduous Forest in Korea I. Losses in Dry Weight of Leaf Litter

  • Yang, Keum-Chul;Shim, Jae-Kuk
    • The Korean Journal of Ecology
    • /
    • 제26권4호
    • /
    • pp.203-208
    • /
    • 2003
  • Losses in the dry weight of leaf litter from six tree species were studied during 16 months on the forest floor in temperate deciduous forest of Mt. Cheonma in the vicinity of Seoul in Korea by using litter bag method. The decomposition rate of each leaf litter varies with each species. After 16 months elapsed, the leaf litter of Acer pseudo-sieboidianum showed the highest decomposition constant (0.82) as Olson´s decomposition constant, while that of Pinus densiflora showed the lowest decomposition constant (0.33). The decomposition constant of Quercus mongolica, Q. serrata, Betula ermani and Carpinus laxiflora showed 0.43, 0.37, 0.66 and 0.75, respectively. The decomposition constant of leaf litter was considered with temperature and precipitation which accumulated daily during each term of litter bag collection. The decomposition constant of leaf litter showed closely positive correlation with daily accumulative temperature and precipitation. The relationships between decomposition constant and the daily accumulative temperature and precipitation at each period of litter bag collection were analyzed through multi-regression analysis. The correlation coefficients as a result of multi-regression analysis in Q. mongolica, Q. serrata, P densiflora, B. ermani, C. laxiflorais and A. pseudo-sieboldianum were 0.83, 0.81, 0.69, 0.77, 0.77 and 0.62, respectively. The precipitation showed higher effect, about 10 times, on the leaf litter decomposition than the daily accumulative temperature.

SimCalc MathWorlds를 활용한 함수적 상황에서 드러나는 중학생들의 일정한 변화율에 대한 이해 (Middle School Students' Understanding of Constant Rate of Change in Functional Situations Using SimCalc MathWorlds)

  • 마민영
    • 대한수학교육학회지:수학교육학연구
    • /
    • 제27권3호
    • /
    • pp.599-614
    • /
    • 2017
  • 본 연구의 목적은 심칼 프로그램을 활용하여 역동적인 함수적 상황을 관찰하고, 이를 다양한 방식으로 표현하고 해석하는 과정에서 드러나는 중학생들의 일정한 변화율에 대한 이해를 비교 및 분석하는 것이다. 본 연구에서 분석된 수업은 중학교 1학년 학생 6명을 대상으로 진행된 수업 자료의 일부이다. 수업 자료를 분석한 결과, 심칼 프로그램을 활용한 수업은 다음 두 가지 의미를 갖는 것으로 드러났다. 하나는 변화율이 일정한 상황에서 학생들이 주목하는 양들 사이의 관계가 서로 다를 수 있다는 것과, 다른 하나는 학생 스스로 변량의 변화를 조정하고 그 결과를 확인하는 활동을 통해 일정한 변화율의 의미를 더 정교하게 구성하였다는 것이다. 따라서 본 연구는 함수의 교수 학습 상황에서, 특히 일정한 변화율을 포함하는 상황을 다양한 방식으로 표현하고 해석하는 활동에서 공학적 도구를 활용해야 할 필요성을 학생들과의 실제 수업에 근거하여 제시한 것으로, 학생의 이해 수준을 고려하여 공학적 도구를 활용한 함수 지도 내용과 그 방식을 계획하는 데 긍정적인 도움을 줄 것으로 사료된다.

Changes in Pressure-Flow Control Characteristics of Shunt Valves by Intracranial Pressure Pulsation: an In Vitro Study

  • Lee, Chong-Sun;Kim, Joo-Young
    • 대한의용생체공학회:의공학회지
    • /
    • 제26권4호
    • /
    • pp.193-197
    • /
    • 2005
  • Shunt valves used to treat patients with hydrocephalus were tested to investigate influence of intracranial pressure pulsation on their flow control characteristics. Five commercial shunt valves were tested in the flow loop that simulates pulsed flow under pressure pulsation. As 20cc/hr of flow rate was adjusted at a constant pressure, application of $40mmH_2O$ of pressure pulse increased the flow rate by $67.9\%.$ As a 90cm length catheter was connected to the valve outlet, increase in the flow rate was substantially reduced to $17.5\%.$ As the flow rate was adjusted to 40cc/hr at a constant pressure, increase in the flow rate was $51.1\%$ with the same pressure pulsation of $40mmH_2O$. The results indicated that pressure-flow control characteristics of shunt valves implanted above human brain ventricle is quite different from those obtained by syringe pump test at constant pressures right after manufacture. The influence of pressure pulsation was observed to be more significant at low flow rate and the flexibility of the outlet silicone catheter was estimated to significantly reduce flow increase due to pressure pulsation.

소결첨가제와 분위기가 $Pb_{0.98}Cd_{0.02}Zr_{0.36}Ti_{0.39}Ni_{0.083}Nb_{0.167}O_3$의 소결 및 압전 특성에 미치는 영향 (Effects of Sintering Additives and Atmospheres on the Piezoelectric and Sintering Properties of $Pb_{0.98}Cd_{0.02}Zr_{0.36}Ti_{0.39}Ni_{0.083}Nb_{0.167}O_3$)

  • 문종하;박진성;박현수
    • 한국세라믹학회지
    • /
    • 제33권11호
    • /
    • pp.1260-1266
    • /
    • 1996
  • The effects of SiO2 MnO2 and sintering atmospheres (O2, N2) on the piezoelectric properties and densification behaviors of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 were investigated. The addition of SiO2 to the system enhanced the rate of densification but supressed the rate of grain growth. On the other hand the addition of MnO2 to the system did not nearly affect the rate of densification but increased slightly the rate of grain growth The densification of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 was promoted with increasing the partial pressure of O2. The relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 sintered under O2 atmosphere were higher than under N2 atmosphere. Whereas the mechanical quality factor (Qm) of specimens sintered under O2 atmosphere were lower than under N2 atmosphere. Thus the sintering atmosphere of O2 and N2 in Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 acted as donor and acceptor respectively. As the amount of SiO2 increased the relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 but the mechanical quality factor (Qm) did not nearly change, In the case of the addition of MnO2 to the system the relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 sintered under O2 atmosphere decreased rapidly with increasing the amount of MnO2 but they were unchanged with increasing the amount of MnO2 under N2 sintering atmosphere. Therefore the differences of the relative dielect-ric constant ($\varepsilon$r) and piezoelectric constant (d33) due to sintering atmosphere were diminished as the amount of MnO2 increased.

  • PDF

표고버섯의 열풍건조속도론(熱風乾燥速度論)에 관한 연구(硏究) (Kinetics of Drying Shiitake Mushroom, Lentinus edodes sanryun No. 1)

  • 조덕봉;김동필;최춘순
    • 한국식품영양과학회지
    • /
    • 제10권1호
    • /
    • pp.53-60
    • /
    • 1981
  • 열풍에 의한 표고버섯의 건조현상을 속도론적으로 규명하기 위해서 건조속도를 좌우하는 두 가지 인자에 대해서 그 영향을 고찰한 후 선정된 조건에서 건조곡선 및 건조속도식을 유도하였다. 일정 풍속(1.5m/sec)하에서 온도의 변화$(45{\sim}55^{\circ}C)$를 주었을 때 수분의 감소는 지수함수적으로 감소하였으며 감소율은 온도가 높을수록 더욱 높았다. 온도를 $(45^{\circ}C)$로 고정시키고 풍속의 변화$(1.0{\sim}3.1m/sec)$를 주었을 때 2m/sec까지는 풍속이 빠를수록 건조속도가 높아졌으나, 그 이상의 풍속에서는 오히려 건조속도가 감소하였다. 따라서 풍속은 2m/sec에서 가장 건조속도가 높았다. 선정된 온도 $50^{\circ}C$, 풍속 2m/sec, 습도 38-41%의 조건에서 건조곡선 및 건조속도식을 유도하여 본 결과 $X=6.94e^{-0.345t}$와, $dx/dt=-2.39e^{-0.345t}$라는 Kinetic model 이 얻어졌다.

  • PDF