• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.1033-1036
• /
• 2002

Wafer bonding methods such as fusion and anodic bonding suffer from high temperature treatment, long processing time, and possible damage to the micro-scale sensor or actuators. In the localized bonding process, beating was conducted locally while the whole wafer is maintained at a relatively low temperature. But previous research of localized heating has some problems, such as non-uniform soldering due to non-uniform heating and micro crack formation on the glass capsule by thermal stress effect. To address this non-uniformity problem, a new heater configuration is being proposed. By keeping several points on the heater strip at calculated and constant potential, more uniform heating, hence more reliable wafer bonding could be achieved. The proposed scheme has been successfully demonstrated, and the result shows that it will be very useful in hermetic packaging. Less than 0.2 ㎫ contact Pressure were used for bonding with 150 ㎃ current input for 50${\mu}{\textrm}{m}$ width, 2${\mu}{\textrm}{m}$ height and 8mm $\times$ 8mm, 5mm$\times$5mm, 3mm $\times$ 3mm sized phosphorus-doped poly-silicon micro heater. The temperature can be raised at the bonding region to 80$0^{\circ}C$, and it was enough to achieve a strong and reliable bonding in 3minutes. The IR camera test results show improved uniformity in heat distribution compared with conventional micro heaters. For gross leak check, IPA (Isopropanol Alcohol) was used. Since IPA has better wetability than water, it can easily penetrate small openings, and is more suitable for gross leak check. The pass ratio of bonded dies was 70%, for conventional localized heating, and 85% for newly developed FP scheme. The bonding strength was more than 30㎫ for FP scheme packaging, which shows that FP scheme can be a good candidate for micro scale hermetic packaging.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.100-100
• /
• 2011

Nanomaterial architecture with highly ordered, vertically oriented $TiO_2$ nanotube arrays shows a good promise for diverse technological applications. As inspired from the literature reports that Nickel modification can improve the photocatalytic activity of $TiO_2$, it was planned to coat Ni into the $TiO_2$ matrix. In this study, first $TiO_2$ nanotubes(TiNTs) were prepared by anodization (60V,3min) in HF-free aqueous electrolyte on ultrasonically cleaned polished titanium sheet substrates ($1{\times}7cm^2$). The typical thickness of the sintered TiNT ($500^{\circ}C$for10min) was ~1 micronas confirmed from the FESEM study. In the next part, as-anodized and sintered TiNT/Ti photoanodes were used to coat Ni by AC electrodeposition from aqueous 0.1M nickel sulphate solution. During AC electrodeposition, conditions such as 1V DC offset voltage, 9V amplitude (peak-to-peak) and 750 Hz frequency were fixed constant and the deposition time was varied as 0.5 min, 1 min, 2 min and 10 min. The photoelectrochemical performance of pristine and Ni modified TiNT/Ti photoanodes was measured in 1N NaOH electrolyte under 1 SUN illumination in the potential range of -1V and 1.2V versus Ag/AgCl reference electrode. The photocurrent performance of TiNT/Ti photoanode decreased upon Ni modification and the results were confirmed after repeated experiments. This suggests us that Ni modification inhibits the photoelectrochemical performance of $TiO_2$ nanotubes.

• Journal of Pharmaceutical Investigation
• /
• v.22 no.3
• /
• pp.219-227
• /
• 1992

The influence of phenobarbital (PB) pretreatment (75 mg/kg/day, i.p. for 4 days) on the pharmacokinetics of diltiazem (DTZ) and its metabolite, desacetyldiltiazem (DAD), was investigated in rats. DTZ was injected via femoral (3 mg/kg) or portal (10 mg/kg) vein to the control and PB-pretreated rats. DAD was also injected separately via femoral (3 mg/kg) vein to both groups of rats. The intrinsic hepatic plasma clearance of DTZ was found to be significantly increased (6.8-fold) by the PB pretreatment. However, the fraction of an intravenous DTZ dose converted to DAD $(F_mi)$ was only slightly (6%) increased and calculated metabolic rate constant of DTZ to DAD was not affected by the pretreatment. On the other hand, plasma free fraction of DTZ was increased (1.8-fold) from $4.24{\pm}0.25%$ to $7.45{\pm}0.54%$ by the pretreatment. However, the l.8-fold increase in the free fraction of DTZ would not explain the 6.8-fold increase in the hepatic intrinsic clearance of DTZ. Therefore, the increase in either the hepatic blood flow or the metabolism other than to DAD was expected as the probable mechanism(s) of the increased hepatic clearance of DTZ. Sequential metabolism of DAD to further metabolites, however, would be a more potential cause of the apparently unchanged metabolism of DTZ to DAD by the PB-pretreatment.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.3
• /
• pp.355-362
• /
• 2020

The corrosion behavior of the Inconel X-750 alloy was investigated for its potential application under a Cl₂-O₂ mixed gas flow in an Ar atmosphere. The corrosion rate was found to be negligible at temperatures up to 400℃ under a flow rate of 30 mL·min^-1 Cl₂ + 170 mL·min^-1 Ar, whereas an exponential increase was observed in the corrosion rate at temperatures greater than 500℃. The suppression of the corrosion reaction due to the presence of O₂ was verified experimentally at flow rates of 30 mL·min^-1 Cl₂ (4.96 g·m^-2·h^-1), 20 mL·min^-1 Cl₂ + 10 mL·min^-1 O₂ (2.02 g·m^-2 ·h^-1), and 10 mL·min^-1 Cl₂ + 20 mL·min^-1 O₂ (1.34 g·m^-2·h^-1) under a constant Ar flow rate of 170 mL·min^-1 at 600℃ for 8 h. The surface morphology analysis results revealed that porous surfaces with tunnel-type holes were produced under the Cl₂-O₂ mixed-gas condition. Furthermore, the effects of the Cl₂ flow rate on the corrosion rate were investigated, indicating that its impact was negligible within the range of 5-30 mL·min^-1 Cl₂ at 600℃.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.1
• /
• pp.73-79
• /
• 2001

In this study, a submerged plate-type breakwater is considered, which is supported by elastic foundation. This breakwater makes use of wave phase interaction among the incident, diffracted and radiated waves. We apply a three-dimensional singularity distribution method within the linear potential theory in order to describe the wave field. The submerged plate is assumed to be rigid and the elastic support be a linear spring with constant stiffness. A typical rectangle plate is exemplified for numerical calculation. The thickness of the plate is carefully selected in order to guarantee the solution to be stable by checking the condition number of the system matrix. A parametric study is carried out for examining the effect of the stiffness of the elastic support on performance of the breakwater. We also examine the effect of the submerged depth.

• The Journal of Engineering Geology
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2005

As a trial to find an efficient technique for determining hydraulic conductivity, a test application of electrical conductivity measurement technique was made using a signal conditioning data acquisition system in borehole. The experiment was made in two test boreholes BM-2 and BM-3 which are located in the Experiment forests of Kangwon National University in Bongmyongri, Chunchon. We obtained series of electric conductivity variation curves after the beginning and completion of saline water injection using these two bore-holes as the pumping well and the observing well alternatively, The analysis of time series electrical conductivity data suggests kinds of valuable information about aquifer properties by holes and depths, and we could confirm the potential of this method as an efficient tool for in situ aquifer test.

• Journal of Biosystems Engineering
• /
• v.17 no.1
• /
• pp.79-90
• /
• 1992

Viscoelastic characteristics of agricultural products may be determined through three basic tests ; stress relaxation, creep, and dynamic test. Considering the changeability of living materials, dynamic test in which information is derived in a relatively short time appears to be highly desirable, in which either cyclic stress or cyclic strain is imposed and the remaining quantity (strain or stress) is measured. The periodically varying stress will also result in periodically varying strain which in a viscoelastic material should theoretically be out of phase with the stress, because part of the energy subjected to sample is stored in the material as potential energy and part is dissipated as heat. This behavior results in a complex frequency-dependent compliance denoted by J($i{\omega}$). The complex compliance and therefore the storage compliance, the loss compliance, the phase angle, and percent energy loss for the sample should be obtainable with a given static viscoelastic property of the material under static load. The complex compliance of the rough rice kernel were computed from the Burger's model describing creep behavior of the material which were obtained in the previous study. Also, the effects of cyclic load and moisture content of grain on the dynamic viscoelastic behavior of the samples were analyized. The results obtained from this study were summarized as follows ; 1. The storage compliance of the rough rice kernel slightly decreased with the frequency applied but at above the frequency of 0.1 Hz it was nearly constant with the frequency, and the loss compliance of the sample very rapidly decreased with increase in the frequency on those frequency ranges. 2. It was shown that the storage compliance and the loss compliance of the sample increased with increase in grain moisture content. Effect of grain moisture content on the storage compliance of the sample was highly significant than effect of the frequency applied, but effect of the frequency on the loss compliance of the sample was more significant than effect of grain moisture content. 3. In low moisture content, the percent energy loss of Japonica-type rough rice was much higher than that of Indica-type rough rice, but, in high moisture content, vice versa.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.1
• /
• pp.23-26
• /
• 1999

The Langmuir adsorption isotherm at the $(Pt)/0.1M\;H_2SO_4$ electrolyte interface has been qualitatively analyzed using the ac impedance measurement and phase-shift method. The phase shift $(\phi)$ depends on both the cathode potential (E<0) and frequency (f) and is inversely proportional to the factional surface coverage $(\theta)$. At an intermediate frequency band (ca. $1\~100$ Hz), the phase-shift profile $(\phi\;vs.\;E)$ can be related to the fractional surface coverage $(\theta\;vs.\;E)$. The phase-shift profile $(\phi\;vs.\;E)$ can be used as an experimental method to estimate and analyze the Langmuir adsorption isotherm $(\theta\;vs.\;E)$. The equilibrium constant (K) and the standard free energy $({\Delta}G_{ads})$ of the adsorbed hydrogen atom $(H_{ads})\;and\;3\times10^{-4}$ and 20.1 kJ/mol, respectively.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.6
• /
• pp.54-60
• /
• 2016

Multi-port HDPE and Paraffin firing tests are conducted for hybrid gas generator application of a ducted rocket in the low oxidizer mass flux range. A fuel rich gas of O/F ratio from 0.3 to 0.8, a typical O/F operating range of a ducted rocket gas generator, have been achieved with paraffin fuel implying that the hybrid system can be a potential candidate. It was also found that an almost constant O/F ratio regime exists under $35kg/m^2s$ of the oxidizer mass flux, opening a possibility for the paraffin fuel toward the VFDR gas generator application.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.2
• /
• pp.48-59
• /
• 1992

In this paper, the effects of a skirt deformation on the responses of an Air Cushion Vehicle in waves are investigated. The air in the bag and in the plenum chamber is assumed to be compressible and to have a uniform instantaneous pressure distribution in each volume. The free surface deformation is determined in the framework of linear potential theory by replacing the cushion pressure with the pressure patch moving uniformly with an oscillating strength. And the bag-finger skirt is assumed to be deformed due to the pressure disturbance while its surface area remained constant. The restoring force and moment due to the deformation of bag-finger skirt from the equilibrium shape is included in the equations of hearse and pitch motions. The numerical results of motion responses due to various ratios of the bag and cushion pressure or bag-to-finger depth ratios are shown.