• 전기학회논문지
• /
• 제57권8호
• /
• pp.1356-1361
• /
• 2008

A switched reluctance generator(SRG) has simple magnetic structure, and needs simple power electronic driving circuit. But, a SRG are no windings or permanent magnets on the rotor, and there are concentrated windings placed around each salient pole on the stator. Because of the characteristics of time-sharing excitation, the control of SRG is very flexible. And there are several parameters for controlling SRG, such as switch turn-on angle, switch turn-off angle, and exciting voltage and controlling mode, all these will affect the generation greatly. A SRG has positive torque at increasing inductance region and negative torque at decreasing inductance region. In this paper, we studied characteristics about the switch turn-on and off angles according to switch method for constant output voltage of the fixed speed SRG. It is the acoustic noise and torque ripple characteristics. Characteristics for a switch angle and method are presented by experiment using a 50W SRG with 12/8 poles.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.588-589
• /
• 2012

최근 LED 드라이버의 효율 향상에 집중될수록 LED의 특성을 고려한 정전류 제어가 더욱 중요해지고 있다. 본 논문에서는 LED 모듈과 같은 정전류 제어가 필요한 부하에 플라이백 컨버터의 병렬구조 연결에 의한 정전류 공급법에 대해 제안한다. 플라이백 컨버터를 병렬구조로 연결하고 전류 불연속 모드 상태에서 스위칭 소자에 PWM 신호를 교차 인가하고, 또한 싱글 스테이지의 전력변환을 함으로써 시스템 효율을 개선하였다. 더불어 병렬구조로 연결된 플라이백 컨버터의 변압기를 통합하여 설계함으로써 코어의 부피, 비용 및 출력 리플 저감의 효과를 가능하게 하였다. 제안된 알고리즘 및 시스템에 대해서 시뮬레이션을 통해 그 타당성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.185-187
• /
• 1995

A boost converter proposed in this paper operates with high power factor due to input current of sinusoidal waveform. If there were no input LPF, the current is got to be discontinuos form in proportion to AC input voltage magnitude under the constant duty factor switching. Thereupon, the harmonics of input current waveform is reduced and the LPF is made with few elaboration and the control circuit is simple. The switching devices in proposed circuit are operated with soft switching by the partial resonant method. The patial resonant circuit makes use of a reactor using step-up and a capacitor of loss-less snubber. The result is that switching loss is very low and efficiency of system is high.

• 조명전기설비학회논문지
• /
• 제22권10호
• /
• pp.8-17
• /
• 2008

본 논문에서는 선박용 HID조명의 방전 개시전압을 조절함으로써 초기 방전전류를 억제하여, HID조명의 안정적인 점등이 가능한 제어방식을 제안하였다. 제안된 제어 방식은 방전 대기전압까지 출력전압을 상승시킨 후, 충전전압의 저항부하 방전을 통하여 전압을 감소시키면서, 설계된 방전개시전압시점에서 이그니터를 점화하여 방전 개시 전류를 제한한다. 방전 후 정상상태에서는 정전류 제어로 조도를 제어하게 된다. 제안된 방식은 별도의 전압제어기를 포함하지 않으면서도, 방전개시 시점을 조절할 수 있으므로, 초기 방전 전류를 크게 제한할 수 있으므로, 안정적인 점등과 조명의 수명을 확대할 수 있는 장점이 있다. 또한 조명의 이상상태를 간단한 이상검출 회로를 통하여 순시적으로 감시하여 전체 시스템의 보호 성능을 개선하였다. 제안된 제어기는 실제 선박용 2.5[kW]급의 HID 탐사조명에 대한 실험을 통하여 검증하였다.

• 조명전기설비학회논문지
• /
• 제22권1호
• /
• pp.40-49
• /
• 2008

IPMSM 드라이브는 하중 비에 대한 출력이 우수하여 전기자동차 등 응용분야에서 관심이 증가하고 있다. 이러한 응용분야에서 최대 효율을 얻기 위하여 본 논문은 신경회로망 제어기법을 제시한다. 동손과 철손으로 구성된 제어가능한 전기적 손실은 신경회로망의 오류 역전파 알고리즘(EBPA)를 이용하여 최소화시킬 수 있다. 손실의 최소화는 IPMSM 드라이브의 효율 최적화 제어를 가능하게 한다. 본 논문에서는 신경회로망의 EBPA를 이용하여 전동기 구동에 대하여 d축 인덕턴스, 전기자 저항, 역기전력 상수 변화와 같은 파라미터 변동을 시간으로 계산하여 고성능 및 강인성 제어를 제시한다. 제시한 알고리즘은 IPMSM 드라이브 시스템에 적용하고 효율최적화 제어에 의해 제어된 동작특성을 분석하여 논문의 타당성을 입증한다.

• 제어로봇시스템학회논문지
• /
• 제20권2호
• /
• pp.112-119
• /
• 2014

A force support system is composed of capital components such as combat equipments, supplies and so on to enable constant fighting power capability. Private technology level evaluation is on the rise as an important spin-on method in force support systems, which requires 92% of total munitions requirements, to obtain superior private technology. The evaluation of the private sector technology level on Korean force support systems has been conducted for the first time as follows: this research chose 38 items to be acquired within 2-3 years and grouped either identical or similar technology among those 38 items. A technology evaluating method was established based on the analysis of domestic and foreign technology level evaluations. Evaluation was performed by a Delphi survey from 180 private and military experts. To obtain an objective index and raise political availability, a technology system map and standard document were developed and applied to all 38 items.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.311-317
• /
• 2005

NC controller parameters are fixed when the controller is combined with a machine. However, the characteristics of controller could be changed as it has being used by the machine or other environmental conditions. Ultimately, it results in tool positioning accuracy changing. The loading torque in servo motor also influences on the positioning accuracy. This study focus on a measuring and analysing method for verifying the angular positioning accuracy of NC servo motor. We used a high resolution A/D converter for acquiring analogue signal of rotary encoder in servo motor. Generating tool path by the combination of axial movements (X,Y,Z) is compared with the encoder signals with the servo motor torque. The current variation signal is also read from the servo motor power using a hall sensor and converted to the motor torque. The method of analysing proposed in this study will be used for determining the gains (tuning) of parameter in NC controller, when the controller is set up at a machine initially or the controller condition is changed during the work.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1827-1834
• /
• 2016

This paper presents a high efficient generator with PM(Permanent Magnet) exciter. The proposed PM exciter for the generator can produce a linear output voltage according to the engine speed. This output voltage is directly used to control the field current of the generator to adjust the generator output voltage. In the proposed generator system, since the field winding current can be supplied by the PM exciter, the generator can self-start without any battery or an external power supply due to the low residential flux. Furthermore, the operating efficiency of the generator is higher than a conventional winding exciter. The main problem of the proposed generator system, the field winding current controller has to be embedded inside the generator, and it rotates according to the generator shaft. In this paper, the proper embedded current controller is designed for the proposed generator system. Due to the embedded controller cannot be connected to the outside the generator controller, the measured instantaneous output voltage of the generator is transferred by the photo isolated communication using shaft aligned infrared transmitter and receiver to keep the constant generator output voltage. In this paper, 10kW, 380V engine generator with PM exciter and the embedded DAVR(Digital Automatic Voltage Regulator) are described. The proposed high efficiency generator is simulated and tested to verify the effectiveness.

• Journal of Biosystems Engineering
• /
• 제13권3호
• /
• pp.20-31
• /
• 1988

This study was undertaken to investigate the load characteristics of the head-feed thresher, which may be affected by various factors such as physical properties of grain, thresher design parameters and its operational condition. The study was conducted at an initial step toward developing an automatic feed-rate control system of the head-feed thresher. A microcomputer-based data acquisition system for the load-speed characteristic of the thresher-shaft and the rail-deflection of the feeding device in accordance with a varied feeding thickness was developed. The sensors being developed and used for sensing the torque and speed of the cylinder and the power-input-shaft and the feeding thickness showed a high accuracy. A microcomputer-based data acquisition system developed in this study was assessed as adequate for a rapid acquisition and analysis of data. The effect of the feed-rate on the torque and speed of the thresher shaft, when fed intermittently by bundles, affected not by the rice varieties but by the dryness of threshing material tested. When fed by the continuous constant thickness, the torque and speed of the cylinder due to the increase of the feed-rate or feeding thickness were given by the relation by the second order parabola.

• 한국식품영양과학회지
• /
• 제28권6호
• /
• pp.1275-1282
• /
• 1999

To investigate the effect of flour brew with bifidobacteria on bread characteristics, flour brew with bifidobacteria was added to baking after 16 hour incubation at 37oC. The more addition of flour brew, the higher gassing power, the better machinality of dough were obtained, resulting in the larger specific volume of bread. Flavor profile analyzed by Electronic Nose System showed that flavor components of 30% flour brew were decreased comparing with those of control and there was shown definite difference in sensory characteristics between them. Staling studies of bread containing flour brew indicated had a definite effect in retarding the staling rate of bread, with time constant calculated in 30% treatment being 3.09 days and in control being 2.08 days. The enthalphy of gelatinization was decreased from 2.51J/g to 0.61J/g with increment of flour brew, suggesting that starch crystallization is delayed. conclusion, Flour brew fermented by bifidobacteria can be used as a natural bread improver with so many benefits as better machinality, one more day storage period, slower staling rate, better bread volume and more appealing bread flavor.