• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.431-434
• /
• 2005

MTS(Monobloc Tube Shaft) has been used for the reduction in weight of shaft and increase in supply of power in the auto industry nowadays. Cold drawing process having high productivity and reduction in the cost has been regarded as the effective technology that is able to substitute for swaging process as forming MTS with constant outer diameter or hollow shaft without surface defects. The objective of this study is not only to find out the optimal process conditions understanding the effect of process parameters on carrying out cold drawing process of SIS(Steering Input Shaft) but also to control the defects resulted from inappropriate process conditions. Therefore, the proper drawing conditions are presented using FE-Analysis and experiment in the paper.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.363-365
• /
• 2007

Titanium and its alloys have excellent corrosion resistance, high strength to weight ratios and high temperature creep properties, which make them using many various fields of application. Responding to these needs, welding processes for titanium are also being used including TIG, MIG, resistance welding, plasma arc welding, diffusion welding, electron beam welding and laser welding. In this study, It is possible to get sound beads without humping bead and spatter with the decrease of peak power according to increase of pulse width and change of welding speed for heat input control at pulsed Nd:YAG laser welding of titanium plates for Lap welding.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.40.1-40.1
• /
• 2011

This paper presents a pitch controller which can hold output power constant at the rated value. Although wind turbine contains complicated nonlinearities, its behaviour within a certain operating range of a point can be approximated by that of a linear model. By doing so, we can apply rather simple and systematic linear control techniques such as PID and LQR(Linear Quadratic Regulator) to design a linear pitch controller. Because these linear controllers are valid only in a sufficiently small range around an operating point, linearized wind turbine model under the condition of varying wind speed needs a linear pitch controller can achieve the aims of tracking the rated rotor rotational speed. We propose an improved linear pitch controller taking each merit of LQR and PI controller under the condition of varying operating points in this paper.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.6
• /
• pp.567-572
• /
• 2004

This paper shudies an automatic gain control(AGC) algorithm used in wireless communication cellular systems. The AGC design includes the selection of the appropriate analog-to-digital converter(ADC) and keeping the input power to the ADC constant to minimize the quantization noise generated from the analog-to-digital conversion process. In this paper the process to determine the required precision or the An is illustrated and the method to set the design parameters of the AGC is proposed. And the validity of the proposed algorithm is verified by computer simulation.

• Journal of Drive and Control
• /
• v.12 no.1
• /
• pp.21-27
• /
• 2015

Pneumatic cylinders are classified into rod-type pneumatic cylinders and rodless pneumatic cylinders depending on the presence of the rod. Rodless cylinders have a constant area and have no deflection. Rodless cylinders are widely used in automatic systems requiring high-speed performance and high-precision transportation. However, the research of the pneumatic cylinder has been focused on the structure and life characteristics. In this research, aging characteristics and shape parameter analysis which are related to the lifetime were investigated. By conducting the lifetime tests with two different materials for the transfer plate, the failure mode and lifetime characteristics were analyzed. By the Anderson-Darling (A-D) verification based on the complete data set, the analysis results of lifetime distribution, shape parameter, and scale parameter were provided.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.27-29
• /
• 2005

This paper studies particularly applicable method for sensorless Permanent Magnet Brushless DC(PMBLDC) Motor drive system. The waveform of the motor internal voltages (or back emf) contains a fundamental and higher order frequency harmonics. Therefore the third harmonics. component is extracted from the stator phase voltage. The resulting third harmonic signal keeps a constant phase relationship with the rotor flux for any motor speed and load condition. In addition, a simple starting method and a speed estimation approach are also proposed.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.60-62
• /
• 2018

본 논문에서는 유도전동기의 회전자 시정수 오차에 강인한 센서리스 전차원(Full-Order) 자속(Flux) 관측기(Observer)를 제안하였다. 이 관측기는 고정자 자속과 회전자 자속을 동기좌표계상에서 추정한다. 고정자 자속에서 누설 자속을 뺀 공극 자속을 기준으로 제어를 수행하며, 동기좌표계가 공극 자속을 빠르게 따라갈 수 있는 방법을 제안하였다. 제안된 방법을 적용할 때, 기존의 회전자 자속을 직접 이용하는 방법보다 중-고속 영역에서 회전자 시정수 오차의 영향이 감소함을 확인하였다. 또한 기존 관측기와 달리 제안된 관측기에서 적응제어기(Adaptive Controller)는 전동기의 회전 주파수가 아닌, 전동기의 슬립 주파수 만을 추정하므로, 회전자 자속 오차에 민감한 적응제어기의 역할을 축소하였다. 시뮬레이션 및 실험으로 이론의 타당성 및 효과를 검증하였다.

• 전기의세계
• /
• v.14 no.5
• /
• pp.20-27
• /
• 1965

There are several methods of speed control in induction motors. One of which is to change the frequency of source but was not used frequently because of the difficulty of frequency-change. Then, the development of frequency changer using semiconductor enables the method useful. In this paper the speed characteristics of mechanical output, secondary input torque and secondary power factor are described when the frequency of source and voltage which is proportional to the frequency of source in order to make the flux in the air gap in constant, are changed. The above characteristics are searched on the basis of the rated characteristics of the motor. Because the ratio of these is proportional to that of the secondary current or the square value of it. To get the ratio of the secondary current, a current circle diagram is introduced, and the magnitude of the ratio from this diagram is accurate and simple. Experimental results are in good agreement with theoretical predictions.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.2
• /
• pp.102-109
• /
• 1997

The width of fuzzy membership function and control rule has an effect on performance of the fuzzy controller for electric equipment systems. In this paper, the neuro-fuzzy controller is proposed to im¬prove the performance of fuzzy controller. It has the width of membership function, that is adapted to the electrical parameter using multi-layer neural network, it is applied to first order electric power system with dead time and various plant constant. The related simulation resolts show that the pro¬posed neuro fuzzy controller are superior characteristics of improved performance

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.417-418
• /
• 2017

납축전지는 충전특성 곡선에 따라 정전류 충전 구간과 정전압 충전 구간으로 나누어 충전 동작을 수행하는 것이 바람직하다. 그러나 플라이백 컨버터를 사용한 저가형 배터리 충전기에서는 컨버터 회로의 1차측과 2차측의 절연을 유지하면서 이러한 2가지의 제어를 수행하는 것이 기술적으로 어려울 뿐만 아니라 회로가 복잡해지므로 현실적으로는 간편하게 정전압 충전만을 사용하는 경우가 대부분이다. 이처럼 정전압 충전만을 사용하게 되면 납축전지에 큰 충전 전류가 흐를 수 있으므로 축전지의 발열이나 수명 단축 등의 문제를 야기할 수 있다. 본 논문에서는 마이크로컨트롤러에 의해 제어되는 디지털 가변저항을 사용하여 실시간으로 전압 피드백을 조절하는 방법으로 정전류 제어가 가능한 새로운 정전류 및 정전압 충전 방식을 제안하였으며, 직접 실험을 통하여 유효성을 확인하였다.