• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.10
• /
• pp.4693-4697
• /
• 2016

Aim: The objective of this study is to investigate prognostic factors affecting survival of patients undergoing concurrent or sequential chemoradiotherapy (CRT) for stage III non-small-cell lung cancer (NSCL). Methods and materials: We retrospectively reviewed the clinical records of 148 patients with advanced, inoperable stage III NSCLC, who were treated between 2007 and 2015. Results: The median survival was found to be 19 months and 3-year overall survival was 27%. Age (<65 vs ${\geq}65years$, p=0.026), stage (IIIA vs IIIB, p=0.033), dose of radiotherapy (RT) (<60 vs ${\geq}60Gy$, p=0.024) and treatment method (sequential chemotherapy+RT vs concurrent CRT, p=0.023) were found to be factors affecting survival in univariate analyses. Gender, histological subtype, weight loss during CRT, performance status, induction/consolidation chemotherapy and presence of comorbidities did not affect survival (p>0.050). Conclusion: Young age, stage IIIA, radiotherapy dose and concurrent chemoradiotherapy may positively affect survival in stage III NSCL cases.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.1
• /
• pp.59-70
• /
• 2002

Horizontal drains are sometimes installed on the ground together with vertical drains in order to drain excess pore water. Taking into account the discharge capacity of horizontal drains, a new analytical method is developed in this paper, and then a new formula for the discharge capacity of horizontal drains is proposed. It is known from the analysis that the effect of the rate of surcharge loading is negligible in determining horizontal discharge capacity. This formula is described as the function of coefficient of consolidation, space of vertical drain, compression index, length of horizontal drains, and thickness of the compressible layer.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.2
• /
• pp.134-142
• /
• 1997

This study was performed to evaluate the drain runoff characteristics from one paddy field, and to provide the basic data required for the determination of flood discharge and unit drainage water for drainage improvement and farmland consolidation. For this purpose, under the assumption that drain discharge from paddy field was similar to outflow of reservoir, runoff model based on storage equation was applied to the experimental field, and simulated results were compared to the measured discharge at weir point. To estimate effective storage volume of paddy field with water depth, 4 regression formula were examined such as linear, exponential, power, and combined. From the observed runoff characteristics, it was shown to be 3.3~16.3${\ell}$/sec in weir discharge, 57.2~98% in runoff ratio, and relative error of simulated result was 3.0~39.4%, 8.5 ~56.0 % for peak flow and runoff ratio, respectively. Curve number by SCS method was calculated as mean value of 96.4 using measured rainfall and runoff data, it was considered relatively high because paddy field has generally flooding depth contrary to the upland watershed area.

• Journal of the Korean Society of Safety
• /
• v.14 no.4
• /
• pp.135-141
• /
• 1999

This study is an experimental study to investigate the possibility of the utilization of paper ash as the cover, liner in waste disposal landfill and other construction materials. The sample used in these tests was obtained from Daehan paper mill. A series of tests were peformed to evaluate basic properties, compaction, permeability, compressive strength, consolidation, leaching, and CBR of paper ash. In order to investigate the soil engineering properties of paper ash, the test results were compared with those obtained of fly ash. The results of unconfined compression tests show that paper ash had a larger strength than the fly ash. Also, the maximum dry unit weight of paper ash was approximately 59～76.9% less than that of the fly ash. It was found from the results of leaching test that paper ash is classified as non-detrimental general wastes according to the waste management law.

• Journal of Powder Materials
• /
• v.15 no.4
• /
• pp.279-284
• /
• 2008

Dense nanostructured $NbSi_2$ was synthesized by high-frequency induction-heated combustion synthesis (HFIHCS) method within 1 minute in one step from mechanically activated Nb and Si powders. Highly dense $NbSi_2$ with relative density of up to 99% was simultaneously synthesized and consolidated under the combined effects of an induced current and mechanical pressure of 60 MPa. The average grain size and mechanical properties (hardness and fracture toughness) of the compound were investigated.

• Journal of Welding and Joining
• /
• v.33 no.6
• /
• pp.1-5
• /
• 2015

Additive Manufacturing defines the fabrication of objects by successive consolidation of materials, layer by layer, according to a three-dimensional design. The numerous technologies available today were recently standardized into seven categories based on the general method. Each technology has its own set of advantages and limitations. Though it very much depends on the field of application, major assets of additive manufacturing compared to conventional processing routes are the ability to readily offer complexity (in terms of intricate shape and customization) and significant reduction of waste. On the other hand, additive manufacturing often suffers of relatively low production rates. Anyhow, additive manufacturing technologies is being given outstanding attention. In particular, metal additive manufacturing emerges as of great significance in industries like aerospace, automotive and tooling. The trend progresses toward full production of high value finished products.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.311-317
• /
• 2008

This study was carried out to improve our understanding about the influence of silt content on the stress-strain of sand under cyclic loading. Soil specimens were prepared by wet-tamping method as same void ratio and specimen's silt contents on total weights was changed from 0% to 20%. Also, effects of the silt contents on the stress-strain response were studied at different anisotropic consolidation ratio, Kc=1.0, 1.5, 2.0 condition. As a result, cyclic shear strength decreased as silt contents increased in same stress ratios. In same silt contents, cyclic shear strength increased as Kc increased in lower silt contents, but in higher silt contents, it had reverse results.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.966-973
• /
• 2005

The stress concentration ratio in accordance with area replacement ratios were considered as core elements of design. However, the stress concentration ratio will be vary depends on progress of consolidation in clay ground. And, since it is not sure to know the affecting factors accurately, the value is decided based on field experiences. To use SCP method more effective and correspond to soil improvement, the decision on proper area replacement ratio through the exact stress concentration ratio is very important. Accordingly, a numerical analysis on influence of various factors that needed to make rational designing guide for decision of proper area replacement ratio to stress concentration ratio was executed in this study.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.10a
• /
• pp.124-131
• /
• 1993

A successful site application with 700kg/$\textrm{cm}^2$ ultra-high strength concrete was made by research team of Daewoo Institute of Construction Technology in Jinhae. Trial mixings of concrete, the productivity of batcher plant, the elapsed time and the pumpability had been investigated for the site condition, before the site application. As results, the efficiency of production by automatic batcher plant systems was improved and the method of quality control was estabilished for the security of fluidity due to the elapsed time, the pumping and consolidation and so on. The concrete strength cores as well as cylinders was showed more than 700kg/$\textrm{cm}^2$ for the required age. And this study would be provided valuable data base for the practical utilization of high strength concrete. Further, this study would be given new possibilities of high rise RC constructions.

• Korean Journal of Organic Agriculture
• /
• v.25 no.4
• /
• pp.711-724
• /
• 2017

The purpose of this research is to go beyond the policy support of the traditional sixth industry and to build a business model of the farmers' business by establishing the business model of the establishment of the sixth industry utilizing agricultural products of individual farmers. First, we defined the business model of the 6th agricultural industry, and secondly set up two models via FGI based on the 9 block model of BMC (Business Model Canvas), and applied feasibility, cost appropriate, differentiation point Through the establishment of hard-working business, sales consolidation, consumer-centric model set. Third, using the Delphi method in each area of 9 Block, the final 21 components were set. Through this BMC model, it was shown that discrimination and accessibility are important factors in the 6th agricultural field foundation business model.