• Tribology and Lubricants
• /
• v.28 no.6
• /
• pp.328-332
• /
• 2012

Generated Axial Force (GAF) due to internal friction at Constant Velocity (CV) joints is one of the causes generating vibration problems such as shudder in vehicle. In this study, the GAF measuring tester is developed to precisely measure GAF caused by internal friction in CV joints. As the developed tester can control temperature at joint, driving torque, angle of rotation and joint angles, actual driving conditions such as sudden acceleration can be applied to the machine. GAFs are measured and compared by using different types of grease in tripod housing. Also GAFs are measured for both new and used CV joints to be compared and analyzed. The test result shows the repeatability and consistency of the tester in terms of the different test conditions. By using the developed CV joint tester, friction performance of the joint can be evaluated by proposing the best CV joints as well as greases generating the lowest GAF.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.4
• /
• pp.377-385
• /
• 2005

An analytical model was developed using the lumped mass parameter method to estimate temperature distribution of metal parts and refrigerant of the hermetic reciprocating compressor, All of the lumped mass has been equated with the first law of thermodynamics. In the delivered equation, correlations of heat transfer coefficient in the heat transfer equation were taken from open literature. The equations are solved by Gauss-Jordan method simultaneously. To verify the developed numerical program, an experiment was conducted with a domestic refrigerator. The compressor which had been installed at the bottom of the experimental refrigerator was modified to measure internal temperature. Model verification test was conducted at $30^{\circ}C$ outdoor temperature with variation of compressor cooling conditions. As a result, there is a good consistency between calculated temperature and measured one.

• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.383-384
• /
• 2016

The Special Needs Education Assessment Tool (SNEAT) were verified of reliability and validity. However, the reliability and validity has been verified is only Okinawa Prefecture, the national data has not been analyzed. Therefore, this study aimed to verify the reliability and construct validity of SNEAT in Miyagi Prefecture as part of the national survey. SNEAT using 55 children collected from the classes on independent activities of daily living for children with disabilities in Miyagi Prefecture between November and December 2015. Survey data were collected in a longitudinal prospective cohort study. The reliability of SNEAT was verified via the internal consistency method; the coefficient of Cronbach's ${\alpha}$ were over 0.7. The validity of SNEAT was also verified via the latent growth curve model. SNEAT is valid based on its goodness-of-fit values obtained using the latent growth curve model, where the values of comparative fit index (0.997), tucker-lewis index (0.996) and root mean square error of approximation (0.025) were within the goodness-of-fit range. These results indicate that SNEAT has high reliability and construct validity.

• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.387-388
• /
• 2016

Kwon (2015) was developed Employment Promotion Tool for Persons with Disabilities in the Aspect of the Quality of Life(QOL-EPAT). But its reliability and validity have not been verified yet. Therefore, this study aimed to verify the reliability, content validity and construct validity of QOL-EPAT. This study was conducted with a disability employment specialists. Period May to October 2015, six months, was distributed to collect the questionnaire. Reliability of QOL-EPAT was estimated using the internal consistency method; both the coefficient of Cronbach's ${\alpha}$ were over 0.7. Construct Validity; Construct validity was verified using structural equation modeling (SEM). Goodness of fit index (GFI), Adjusted goodness of fit index (AGFI), comparative fit index (CFI), tucker-Lewis index (TLI) and root mean square error of approximation (RMSEA) are the suitability indices of SEM. As the result, GFI=0.898; AGFI=0.844; CFI=0.961; TLI=0.949 and RMSEA=0.069. The validity was verified because the values of GFI, AGFI, CFI, TLI and RMSEA were within the goodness-of-fit range. Thus, impaired employs promoters of Japan also provided which allows for analysis of the policy by using a validated scale.

• Journal of Environmental Science International
• /
• v.16 no.7
• /
• pp.847-853
• /
• 2007

In Korean coastal areas, land reclamations are main development projects that should be based on environmental impact assessment(EIA), because those human interventions can change coastlines, damage tidal flats, and pollute adjacent areas to threat seafood safety and devaluate overall ecosystem service value. Existing procedures of the EIA for land reclamation projects were diagnosed and evaluated to enhance them. Problems were identified in the designation of survey areas, the consistency in survey sites and periods, the standardization of survey methods and reports, the confidence of survey results and the verification of predictions. Lack of integration was noticeable and could be improved by synthesizing different assessments from topography geography, marine physics, marine chemistry and marine biology. We suggest that successful precautionary marine environment management requires readjusting the cost of EIA, recruiting experts in marine environment, constructing database and establishing specialized assessment system.

• Journal of Korean Academy of Nursing
• /
• v.37 no.5
• /
• pp.625-634
• /
• 2007

Purpose: The purpose of this study was to test the reliability and validity of an MIL instrument for adolescents. Method: The research design was a three-phase, methodological study. 1) The original 46 items of the Meaning in Life (MIL) Scale were reviewed and corrected partially by 20 adolescents. 2) The content was validated by an expert panel (n=15) and adolescents (n=5). 3) The instrument was validated by survey (n=468). Finally, 33 items were chosen for the adolescents meaning in life(AMIL) scale. Results: Cronbach's alpha coefficient of the 33 items was .92, confirming the high internal consistency of the instrument. 2) Eight factors were extracted through factor analysis: 'experience of love', 'making efforts for goal', 'awareness of essential being', 'awareness of self limitation', 'feeling of satisfaction', 'relation experience', 'positive thinking', and 'hope'. These factors explained 58.26% of the total variance. Conclusion: AMIL Scale was identified as a tool with a high degree of reliability and validity. The tool can therefore be effectively utilized to assess the degree of meaning of life in caring areas for adolescents. Studies on AMIL of different adolescent subjects are needed for further verification.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.3
• /
• pp.529-538
• /
• 2005

AUML (Agent Unified Modeling Language) is specification anger of agent software system, sight anger, language that do creation by purpose. Do so that may apply Together that is one of automation application program creation system to Agent's BDI in trend sophistication of software, large size Tuesday in this research and investigate this about operation between component system. Standard detailed statement (FIPA:Foundation for Inteligent Physical Agent) that use can consist by data exchange between component and cooperate each other even if type of component is different mutually to base ACL message, and protocole use and study about method and accuracy and consistency that minimize error when embody this using meta model base etc.. through object intention modelling.

• Advances in nano research
• /
• v.7 no.6
• /
• pp.419-429
• /
• 2019

The effect of an increasing percentage of nanofiller (glass cenosphere) with Glass/Epoxy hybrid composite curved panels modeled mathematically using the multiscale concept and subsequent numerical eigenvalues of different geometrical configurations (cylindrical, spherical, elliptical, hyperboloid and flat) predicted in this research article. The numerical model of Glass/Epoxy/Cenosphere is derived using the higher-order polynomial type of kinematic theory in association with isoparametric finite element technique. The multiscale mathematical model utilized for the customized computer code for the evaluation of the frequency data. The numerical model validation and consistency verified with experimental frequency data and convergence test including the experimental elastic properties. The experimental frequencies of the multiscale nano filler-reinforced composite are recorded through the impact hammer frequency test rig including CDAQ-9178 (National Instruments) and LABVIEW virtual programming. Finally, the nano cenosphere filler percentage and different design associated geometrical parameters on the natural frequency data of hybrid composite structural configurations are illustrated through a series of numerical examples.

• Structural Engineering and Mechanics
• /
• v.78 no.2
• /
• pp.219-230
• /
• 2021

International seismic codes stipulate that adjacent buildings should be separated by a specified minimum distance, otherwise the pounding effect should be considered in the design. Recent researches proposed an alternative method (Double Difference Combination Rule) to estimate seismic gap between structures, as this method considers the cross relation of adjacent buildings behavior during earthquakes. Four different criteria were used to calculate the minimum separation distance using this method and results are compared to the international codes for five separation cases. These cases used four case study buildings classified by different heights, lateral load resisting systems and fundamental periods of vibrations to assess the consistency in results for the alternative methods. Non-linear analysis was performed to calculate the inelastic displacements of the four buildings, and the results were used to evaluate the relation between elastic and inelastic displacements due to the ductility of structural elements resisting seismic loads. A verification analysis was conducted to guarantee that the separation distance calculated is sufficient to avoid pounding. Results shows that the use of two out of the four studied methods yields separation distances smaller than that calculated by the code specified equations without under-estimating the minimum separation distance required to avoid pounding.

• Journal of Korean society of Dental Hygiene
• /
• v.20 no.6
• /
• pp.913-924
• /
• 2020

Objectives: This study was conducted to develop a dental hygienist's job satisfaction scale and to evaluate its validity and reliability. Methods: A total of 34 preliminary questions were composed based on the components commonly defined in previous studies and in-depth interviews. Results: The results of the study were practice activity, professional satisfaction, income, working conditions, patient relations, and co-worker relations using the exploratory factor analysis. Goodness of fit of the model assessed using confirmatory factor analysis generally met the criteria. On verification of the internal consistency, the Cronbach's alpha for the factors were as follows: 0.821 for practice activity, 0.822 for professional satisfaction, 0.847 for income, 0.765 for working condition, 0.743 for patient relations, and 0.747 for co-worker relations, which implied that the measurement tool was reliable. Through exploratory and confirmatory factor analyses, a total of 24 items for six factors: six items for practice activity factors, four items for professional satisfaction, three items for income, four items for working conditions, three items for patient relationships, and three items for coworker relations. Conclusions: Based on the aforementioned results, the validity and reliability of the dental hygienist's job satisfaction measurement tool were satisfactory. Thus, it may be used for assessing the job satisfaction of the dental hygienists in future.