• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.5
• /
• pp.788-797
• /
• 1995

In this paper, a variable time-scale modification using SOLA(Synchronized OverLap and Add) is proposed, which takes into consideration the different time-scaled characteristics of voiced and unvoiced speech, Generally, voiced speech is subject to higher variations in length during time-scale modification than unvoiced speech, but the conventional method performs time-scale modification at a uniform rate for all speech. For this purpose, voiced and unvoiced speech duration at various talking speeds were statistically analyzed. The sentences were then spoken at rates of 0.7, 1.3, 1.5 and 1.8 times normal speed. A clipping autocorrelation function was applied to each analysis frame to determine voiced and unvoiced speech to obtain respective variation rates. The results were used to perform variable time-scale modification to produce sentences at rates of 0.7, 1.3, 1.5, 1.8 times normal speed. To evaluate performance, a MOS test was conducted to compare the proposed voiced/unvoiced variable time-scale modification and the uniform SOLA method. Results indicate that the proposed method produces sentence quality superior to that of the conventional method.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06c
• /
• pp.111-115
• /
• 1994

In this paper, a variable time-scale modification using SOLA is proposed, which takes into consideration the different time-scaled characteristics of voiced and unvoiced speech. The conventional method performs time-scale modifiction at a uniform rate for all speech. For this purpose, voiced and unvoiced speech duration at various taling speeds were statistically analyzed. A clipping autocorrelation functio was applied to each analysis frame to detemine voiced and unvoiced speech to obtain respective variation rates. The results were used to perform variable time-scale modification to evaluate performance, a MOS test was conducted to compare the proposed voiced/unvoiced variable time-scale modification and the uniform SOLA method. Results indicate that the proposed method produces sentence quality superior to that of the conventional method.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.10
• /
• pp.75-82
• /
• 2018

This study suggests the general support center with comprehensive services for the elderly. In general, the modifications of the elderly housing have a direct influence on the "Quality of life" and "Aging in place" for the elderly. But until now, the elderly housing modification has been carried out separately on the elderly welfare category. It is very inefficient and inconvenient for the elderly. Therefore, it is necessary to have a comprehensive organization that includes the implementation of modifications. To provide reasons for this insistence, this study analyzed the previous research, legal system guidelines, and others related things. And it researched the perception of the comprehensive institution and the need for housing modification through the recognition survey of the elderly and the early elderly. The study found that the current domestic legal system does not have an integrated system to carry out the entire process of applying and implementing the elderly housing modification. On the other hand, the results of the survey showed that the elderly hoped to introduce a comprehensive and user-friendly institution for housing modification.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.4
• /
• pp.62-70
• /
• 1988

This study was conducted to solve the problems for the unsuitable parameters and the uncertainty of design flood can be appeared by low outliers were inclined to the lower part from the trend of the balance of the data. Derivation of reasonable design flood was attempted finally by modification of low outliers with analysis of flood frequency by means of Log Pearson Type Ill distribution. Three subwatersheds were selected as studying basins with the annual maximum series including low outliers along Geum River basin. The results through this study were analyzed and summarized as follows. 1. Log Pearson Type In distribution was confirmed as a reasonable one by X$^2$ goodness of fit test at Gong Ju, Gyu Am, og Cheon watershed along Geum River basin. 2. Probable flood flows for each watershed were derivated by flood frequency curve with outliers. 3. Weighted skew coefficient for each watershed was calculated for the evaluation of freq- uency factor which is needed for the modification of low outlier. 4. It was confirrned that adjusted frequency curve has a lower tendency than that of deletion of low outlier in common at all watersheds. 5. Final probable flood flows were derivated by modification with evaluation of modified basic statistics for three watersheds. 6. In comparison with a frequency curve with modification and one with outlier, The former has a higher probable flood flow within three years of return periods than that of the latter, and vice versa over three years of return periods.

• Journal of the Korean Institute of Gas
• /
• v.4 no.1 s.9
• /
• pp.33-39
• /
• 2000

Stress intensity factor after penetration was discussed experimentally using long surface pre-cracked specimens of aluminum alloy 5083. The propagation behavior evaluation of long surface crack by equation proposed at penetration of short surface crack could be need modification to evaluate precisely because the error was high as aspect ratio is little. The modification of stress intensity factor with consideration of aspect ratio at penetration of long surface crack can be analyzed the behavior of crack penetration quantitatively.

• Journal of Energy Engineering
• /
• v.21 no.4
• /
• pp.378-384
• /
• 2012

Higher compression ratio is required in diesel engine to ignite the fuel that leads to better efficiency. For complete combustion inside the cylinder it is important to ensure the clean air flow with free of debris and as cool as possible. In this manner, modification of intake valve arrangements is taken in to consideration importantly. In this paper, the intake valve arrangements are modified with newly designed valve mixer. It causes swirl flow of air through the intake port that mixing with the fuel followed by complete combustion. The use of valve mixer reduces the carbon sediment formation on valve fillet and its face area as the carbon particles gradually take place on it after certain running period. It therefore, helps to increase the valve lifetime. And at the same time it reduces the exhaust elements i.e. soot from the automobiles to a significant level.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.16 no.1
• /
• pp.74-83
• /
• 2020

A number of so-called 'Type IV' cracking was reported to occur at the welded joints of the P91 steel or P92 steel reheat steam piping systems in Korean supercritical thermal power plants. The reheat steam piping systems are subjected to severe thermal and pressure loading conditions of coolant higher than 570℃ and 4MPa, respectively. In this study, piping analyses and design evaluations were conducted for the piping system of a specific thermal plant in Korea and suggestions were made how structural integrity could be improved so that type IV cracks at the welded joints could be prevented. Integrity evaluations were conducted as per ASME B31.1 code with implicit consideration of creep effects which was used in original design of the piping system and as per nuclear-grade RCC-MRx code with explicit consideration of creep effects. Comparisons were made between the evaluation results from the two design rules. Another approach with modification or reduction of the redundant supports in the piping systems was investigated as a tool to mitigate thermal stresses which should essentially contribute to prevention of Type IV cracking without major modification of the existing piping systems. In addition, a post weld heat treatment method and repair weld method which could improve integrity of the welded joint of P91 steel were investigated.

• International Journal of Automotive Technology
• /
• v.8 no.2
• /
• pp.243-248
• /
• 2007

The durability of a cylinder head is influenced by the thermal and mechanical history during the manufacturing process, as well as engine operation. In order to improve the durability of cylinder head, both load from engine operation and the preload conditions from the manufacturing process must be considered. The aluminum cylinder head used for a HSDI diesel engine is investigated to reduce the possibility of high cycle fatigue crack in this study. FE analysis is performed to elucidate the mechanism of high cycle fatigue crack in the HSDI diesel cylinder head. Two separate approaches to increase the durability of the cylinder head are discussed: reducing load from engine operation and re-arranging preload conditions from the manufacturing process at the critical location of the cylinder head. Local design changes of the cylinder head and modification of pretension load in the cylinder head bolt were investigated using FE analysis to relieve load at the critical location during engine operation. Residual stress formed at the critical location during the manufacturing process is measured and heat treatment parameters are changed to re-arrange the distribution of residual stress. Results of FE analysis and experiments showed that thorough consideration of the manufacturing process is necessary to enhance the durability of the cylinder head.

• BMB Reports
• /
• v.37 no.1
• /
• pp.59-74
• /
• 2004

The study of whole patterns of changes in protein expression and their modifications, or proteomics, presents both technological advances as well as formidable challenges to biological researchers. Nutrition research and the food sciences in general will be strongly influenced by the new knowledge generated by the proteomics approach. This review examines the different aspects of proteomics technologies, while emphasizing the value of consideration of "traditional" aspects of protein separation. These include the choice of the cell, the subcellular fraction, and the isolation and purification of the relevant protein fraction (if known) by protein chromatographic procedures. Qualitative and quantitative analyses of proteins and their peptides formed by proteolytic hydrolysis have been substantially enhanced by the development of mass spectrometry technologies in combination with nanoscale fluidics analysis. These are described, as are the pros and cons of each method in current use.

• Journal of the Korean Society of Costume
• /
• v.44
• /
• pp.77-89
• /
• 1999

The present study aims at developing standardized patterns of ready-made Korean traditional costume for women in twenties and at suggesting classified standards so that consumers can buy high quailty clothes easily without dissatisfaction on unsuitable measurments. It was found from the dressing experiment results that new-concept patterns of Korean jackets onsidering women's bodies were seriously required because jackets fabricated by conventional patterns were not properily fitted to their bodies. During the processes of patten development, dressing experiment, and subsequent pattern adjustment, measurment standards classified by women's bodies were established, and new standardized patterns were developed in accordance with characteristics of women's bodies. These findings suggested that future studies on the pattern modification should be achieved continuously in consideration of ages, tastes, and fashions of modern women consumers.