• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.672-675
• /
• 1995

Because of a sudden growth of the research of fatigue failure, recent machines or structures have been designed by damage tolerance design in many fields. Consequently, it is the most primary factor to clarity the specific character of fatique failure in the design of machines or structures considering reliability. A statistical analysis is required to analyze the outcome of an experiment or a life estimate by reason of that fatigue failure contains lots of random elements. Reliability analysis which has tukenn the place of the existing analyses in the consideration of the uncertainty of a material, is a very efficient way. Even reliability analysis, however, is not a perfect way to analyses the uncertainties of all the materials. This thesis would refer to a newly conceived data analysis that the coefficient of a system could cause the ambiguity of the relationship of an input and output.

• 한국해안해양공학회지
• /
• 제7권4호
• /
• pp.313-320
• /
• 1995

일정 경사를 갖는 해안에 입사하는 같은 주기의 두개의 파열이 교차하는 경우에 대하여 천해역에서 파랑 변형에 대한 수치해석을 수행하였다. 본 모형은 파랑 에너지 평형 및 파랑운동 보존식에 기초하여, 시간과 수심에 대해 평균한 질량 및 수평방향 운동 보존방정식을 반복적으로 계산하여 해를 구하였다. 계산된 결과를 이용하여, 천해역에서 파열이 교차할 때 파고와 평균수위변동에 영향을 주는 입사 파향각 및 심해파고와 같은 매개변수 변화에 따른 파랑 변형에 대해 고찰하였다.

• Environmental Analysis Health and Toxicology
• /
• 제16권2호
• /
• pp.67-74
• /
• 2001

In a previous study by Kim et al. (2000), sodium hypochlorite (NaOCl) has been demonstrated to be effective against algae that cause red tides. To secure the environmental safely of the chemical in practical use, effect of NaOCl, at concentrations required for algicidal activity, on the histology of rockfish and little neck clam was examined. When the animals were exposed to NaOCl at concentrations of 0.5 or 2ppm for 1 hr, there was no exposure-associated histological change in either animal. As the experimental exposure condition was set in consideration of the use, our results provide safety information necessary for practical application to marine fields.

• Current Photovoltaic Research
• /
• 제5권1호
• /
• pp.28-32
• /
• 2017

In this paper, (Ga,Al):ZnO layers were deposited by sputtering to evaluate the device performance according to the thickness of the layer. As the thickness increased, low transmittance was observed, but the electrical resistance was improved. On the other hand, the highest efficiency was recorded at 400 nm device than a 500 nm of it. Therefore, since the critical thickness exists, it is necessary to set an adequate TCO layer thickness in consideration of the characteristics of the underlying film and the device.

• Computers and Concrete
• /
• 제18권1호
• /
• pp.69-97
• /
• 2016

Performance-based remaining life assessment of reinforced concrete bridge girders, subject to chloride-induced corrosion of reinforcement, is addressed in this paper. Towards this, a methodology that takes into consideration the human judgmental aspects in expert decision making regarding condition state assessment is proposed. The condition of the bridge girder is specified by the assignment of a condition state from a set of predefined condition states, considering both serviceability- and ultimate- limit states, and, the performance of the bridge girder is described using performability measure. A non-homogeneous Markov chain is used for modelling the stochastic evolution of condition state of the bridge girder with time. The thinking process of the expert in condition state assessment is modelled within a probabilistic framework using Brunswikian theory and probabilistic mental models. The remaining life is determined as the time over which the performance of the girder is above the required performance level. The usefulness of the methodology is illustrated through the remaining life assessment of a reinforced concrete T-beam bridge girder.

• 한국농공학회논문집
• /
• 제51권6호
• /
• pp.63-68
• /
• 2009

Most of agricultural reservoirs in Korea have no function of flood control except 5% of reservoirs even exposed to natural disaster. In addition, there are increasing needs for the reservoir to guarantee the release of environmental flow to the downstream. Thus, the purpose of this paper is to study the priority decision method for the reservoir redevelopment satisfying both water utilization and flood control. The major scopes of this research are to set up six priority indices and to make needed GIS data for calculating each priority. There is important consideration of obtaining the data or not in deciding the indices. Although the detailed indices is expected to better reflect redevelopment priority but the subjective indices like, 'opinion' and 'landscape' are excluded. From the results, it will enables the six priority indices to really assist in decision redevelopment priority of agricultural reservoirs.

• 한국경영과학회지
• /
• 제22권4호
• /
• pp.115-131
• /
• 1997

The problem addressed in this paper is to minimize the deviations of workloads assigned to worker and to maximize the total utilizations(degree of skill) between workers and machines simultaneously. Each worker can handle the set of machines with the different degree of skill and each machine has the workloads needed to be processed. Also, each worker has to be assigned to at least one machine with the minimum workload deviation. This problem can be formulated as a preemptive goal programming with generalized assignment constraints. The proposed algorithm consists of two phases. First, a capacitated circulation network is constructed to assign the workers to machines with the maximum total utilizations while considering workloads balance. Then, a refinement process is applied to the split machines to satisfy the feasibility condition. The real industrial application in a plastic extrusion manufacturer is included along with several computational experiments.

• Journal of information and communication convergence engineering
• /
• 제10권4호
• /
• pp.396-404
• /
• 2012

This paper proposes an analysis method to check the schedulability of a set of sporadic tasks under earliest deadline first (EDF) scheduler. The sporadic task model consists of subtasks with precedence constraints, arbitrary arrival times and deadlines. In order to determine the schedulability, we present an approach to find exact worst case response time (WCRT) of subtatsks. With the technique presented in this paper, we exploit the precedence relations between subtasks in an accurate way while taking advantage of the deadline of different subtasks. Another nice feature of our approach is that it avoids calculation time overhead by exploiting the concept of deadline busy period. Experimental results show that this consideration leads to a significant improvement compared with existing work.

• 대한전기학회논문지
• /
• 제41권2호
• /
• pp.107-117
• /
• 1992

This paper presents an improved algorithm of optimal measurement design with a reliability evaluation method for a large power system. The proposed algorithm is developed to consider the dummy bus and to achieve highest accuracy of the state estimator as well with the limited investment cost. The dummy bus in the power system is impossible to install measurement meter, while real and reactive power measurements is considered in the proposed algorithm. On the other hand, P/C model is developed by taking advantage of the matrix sparsity. The improved program is successfully tested for KEPCO system with PSS/E lineflow calculated data package.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1308-1311
• /
• 1996

We propose a new linearized model which can be used very efficiently for the design and analysis of the autopilot of aerodynamically controlled skid-to-turn missiles. Proposed model is based on the linearized equations of the missile dynamics derived in the aerodynamic frame where xz plane contains the missile longitudinal axis and velocity vector. However, to take the effect due to the small perturbation of the missile body into consideration, we introduce a new frame which is identical to the aerodynamic frame in the trim state but after small perturbation it moves fixed with the missile body, and finally, the proposed model is set up in this frame. It is shown by nonlinear simulations and stability analysis of a numerical example that the new model describes the missile motion better than the conventional one linearized in the body frame with a certain amount of simplification.