• Steel and Composite Structures
• /
• 제18권6호
• /
• pp.1331-1351
• /
• 2015

Cold-formed built-up members are compression members that are common in multiple areas of steel construction, which include cold-formed steel joints and stud walls. These members are vulnerable to unique buckling behaviors; however, limited experimental research has been done in this area. Give this gap, experimental testing of 71 built-up members was conducted in this study. The variations of the test specimens include multiple lengths, intermediate welds, orientations, and thicknesses. The experimental testing was devised to observe the different buckling modes of the built-up C-channels and the effects of the geometrical properties; to check for applicability of multiple intermediate welding patterns; and to evaluate both the 2001 and 2007 editions of the American Iron and Steel Institute (AISI) Specification for built-up members in pure compression. The AISI-2001 and AISI-2007 were found to give inconsistent results that at times were un-conservative or overly conservative in terms of axial strength. It was also found that orientation of the member has an important impact on the maximum failure load on the member.

• Coupled systems mechanics
• /
• 제2권1호
• /
• pp.85-110
• /
• 2013

Generally, mass concrete structural behavior is governed by the strain components. However, relevant guidelines in dam engineering evaluate the structural behavior of concrete dams using stress-based criteria. In the present study, strain-based criteria are proposed for the first time in a professional manner and their applicability in seismic failure evaluation of an arch dam are investigated. Numerical model of the dam is provided using NSAD-DRI finite element code and the foundation is modeled to be massed using infinite elements at its far-end boundaries. The coupled dam-reservoir-foundation system is solved in Lagrangian-Eulerian domain using Newmark-${\beta}$ time integration method. Seismic performance of the dam is investigated using parameters such as the demand-capacity ratio, the cumulative inelastic duration and the extension of the overstressed/overstrained areas. Real crack profile of the dam based on the damage mechanics approach is compared with those obtained from stress-based and strain-based approaches. It is found that using stress-based criteria leads to conservative results for arch action while seismic safety evaluation using the proposed strain-based criteria leads to conservative cantilever action.

• Journal of Rhinology
• /
• 제25권2호
• /
• pp.99-102
• /
• 2018

Lateral pharyngoplasty is a surgical option for treatment of obstructive sleep apnea (OSA). Here, we present a case involving a 40-year-old healthy man who underwent surgery, including lateral pharyngoplasty and robotic tongue base resection, for OSA. There were no intraoperative or immediate postoperative complications. However, on postoperative day 3, the patient presented with swelling in the temporal and buccal areas and was diagnosed with subcutaneous emphysema, later confirmed by computed tomography. The patient was carefully monitored under conservative care and discharged without complications. Although subcutaneous emphysema following tonsillectomy is a rare complication and usually resolves with conservative management, in certain cases, it might require surgical intervention. Lateral pharyngoplasty involves tonsillectomy and additional incision along the tonsillar fossa, which makes it susceptible to pharyngeal wall defects and, consequently, subcutaneous emphysema. Additionally, lateral pharyngoplasty and robotic tongue base resection cause pain and might thus contribute to the increase in intrapharyngeal pressure, which might aggravate subcutaneous emphysema. Lateral pharyngoplasty should be performed with meticulous dissection of the superior pharyngeal constrictor muscle. Healthcare providers should be aware of these complications and, upon suspicion of the same, place the patient under close observation to prevent life-threatening situations.

• The Journal of Korean Physical Therapy
• /
• 제17권4호
• /
• pp.519-535
• /
• 2005

The main purpose of this study is to evaluate the effects of manual therapies which are Posterior Anterior Central Vertebral Pressure (PACVP) and Posterior Anterior Unilateral Vertebral Pressure(PAUVP} in patients having a chronic pain in the neck. This study focused on sixty patients having a chronic pain in the neck from 19 years old and 65years old. There are 33 females and 27 males each. This study randomize two groups from all subjects that have been mentioned above. Group 1 received a cervical spine manual therapy, Group 2 received a conservative physical therapy. Each therapy was held for 3 times a week, totally, 6 times for two weeks. The tape was used to measure cervical range of motion(ROM) in six areas-flexion, extension, left lateral flexion, right lateral flexion, left rotation, right rotation. 100mm Visual Analogue Scale(100mm VAS) was used to measure the subjective pain level. All measurements of each patient were measured at pre-treatment and 2 weeks post-treatment. The results of this study would be summarized as follow: 1. The manual treatment group has much more recovery than that of conservative physical therapy group in terms of the degree of the ROM improvement showing a significant difference between two groups(p<0.05) 2. The manual treatment group has more recovery than that of the conservative physical therapy group in the improvement of pain(p<0.05).

• 한국안전학회지
• /
• 제33권3호
• /
• pp.39-45
• /
• 2018

The occupational safety and health act defines how to evaluate the explosion hazardous areas according to KS (Korean Industrial Standards). Current KS have to follow IEC (International Electrotechnical Commission) 60079-10-1 1st edition and there has been no change since 2008. And its 2nd edition has been revised in 2015. In this study, IEC 1st Ed. (IEC 60079-10-1 1st edition) is compared with IEC 2nd edition. Total 112 case studies including four materials (methane, propane, benzene, methanol) are selected to test and explosion hazardous ranges evaluated by IEC 1st and 2nd Ed. are analyzed according to various leakage pressures and hole sizes. In order to verify the results calculated by them, PHAST, which is one of the most representative consequence analysis programs, is employed. As a result, it can be concluded that there are many differences between IEC 1st and 2nd Ed. due to the discharge and the ventilation parameters. As comparing with PHAST, it is confirmed that IEC 1st provides more conservative values than PHAST. Even if IEC 2nd Ed. provides more conservative for gases, this fails to provide more conservative values for liquids. Therefore, it is worth to note that a large value between the explosion hazardous ranges value calculated by the IEC 1st Ed. and 2nd Ed. should be selected until further investigation and analysis is made. Morevover, the full consideration for IEC 2nd Ed. have to be needed.

• Restorative Dentistry and Endodontics
• /
• 제28권3호
• /
• pp.203-208
• /
• 2003

The purpose of this study was to evaluate the effect of salivary contamination of teeth on bonding efficacy of self-priming and self-etching DBSs. The materials used were Single Bond(SB, self-priming system, 3M), Unifil Bond(UB, self-etching system, GC), and Scotchbond Multi-Purpose Plus(SM, 3M) as control. Forty five human molars randomly allocated to three groups as dentin bonding systems tested and embedded in epoxy resin. Then the specimens were wet-ground to expose flat buccal enamel surface or flat occlusal dentin surface and cut bucco-lingually to form two halves with slow speed diamond saw. One of them was used under non-contamination, other under contamination with saliva. The bonding procedure was according to the manufacturer's directions and resin composite(Z-100, 3M Dental Products, St. Paul, MN) was built-up on the bonded surface 5mm high. The specimens were ground carefully at the enamel-composite interface with fine finishing round diamond bur to create an hour-glass shape yielding bonded surface areas of $1.5{\pm}0.1\textrm{mm}^2$. The specimens were bonded to the modified microtensile testing apparatus with cyanoacrylate, attached to the universal testing machine and stressed in tension at a CHS of 1mm/min. The tensile force at failure was recorded and converted to a tensile stress(MPa). Mean values and standard deviations of the bond strength are listed in table. One-way ANOVA was used to determine significant difference at the 95% level. The bond strength of SBMP and SB were not affected by salivary contamination, but that of UB was significantly affected by salivary contamination. These results indicate that DBSs with total etch technique seems less likely affected by salivary contamination in bonding procedure.

• 생명과학회지
• /
• 제27권6호
• /
• pp.694-701
• /
• 2017

알려진 단독배양이 가능한 원핵생물 중 최소게놈을 가지고 있는 Mycoplasma genitalium보다 보존적 유전자 수가 적은 14개 원핵생물의 유전자를 보존적 유전자 관점의 COG (Clusters of Orthologous Group of proteins)로 검토하였다. 분석대상은 M. genitalium, 초고온성 고세균으로 세포외공생을 하는 Nanoarchaeum equitans, 진정세균으로 식물의 세포내에 기생하는 병원균인 Candidatus Phytoplasma 속 4개와 식물의 수액을 섭취하는 곤충의 세포내에 공생하는 9종이었다. M. genitalium이 가진 367개의 보존적 유전자 중에서, 284개가 비교대상 다른 원핵생물과 공통이었다. M. genitalium 등 분석대상 원핵생물 모두에 보존적 유전자는 29개로, 이들은 리보솜 구성단백질 22개 등 번역관련 25개, RNA 중합효소의 소단위체 3개, 단백질 접힘관련 1개 등으로 단백질의 중요성을 알 수 있었다. 분석대상 15개 원핵생물 중 Candidatus Phytoplasma속 4개 균주 모두에만 존재하는 COG는 40개 였다. 속(genus)이 서로 다른 나머지 9개의 Candidatus는 곤충에 공생한다는 공통점이 있지만 COG0539 (Ribosomal protein S1) 하나만 공통적이었고, 이는 곤충 세포내 공생체들 사이에 보존적 유전자가 다양함을 나타내는 것으로 판단되었다. 본 연구의 결과는 배양이 불가능한 세균의 보존적 유전자 이해에 대한 단서와 함께 아미노산, 항생제, 의약품, 유기합성 전구체 등을 효율적으로 합성하는 원핵생물의 조작에 필요한 기초자료로 활용이 가능할 것이다.

• Restorative Dentistry and Endodontics
• /
• 제26권5호
• /
• pp.372-378
• /
• 2001

The aim of this in vitro study was to analyze the composition of human tooth enamel in terms of three components, Ca, P, and F after demineralization and remineralization in acid buffer solution. A total of 8 human premolars without any defects and cracks were selected and buccal and lingual sides of the teeth were cleaned with an ultrasonic device and pumice without fluoride 5$\times$5mm windows were opened, and other areas were completely covered with 3-coats of nail varnish to prevent from being in contact with demineralized and remineralized solutions. After demineralization process, each tooth was sectioned into two slices, highly polished one of them with$\gamma$-alumina, and then analyzed the composition of the demineralized tooth with EPMA(electron probe micro-analyzer). The other slices were put into the remineralized solution for 10 days, polished, and analyzed in the same manner. These data were statistically analyzed with one sample t-test(p<0.05). The results were as follows. 1. Normal tooth enamel consists of 49.76% Ca, 39.80% P, and 0.28% F. 2. After demineralization, percentage of Ca and P ratio were decreased by about 5.57 and 5.07% respectively. Percentage of F ratio was also decreased by about 0.01%, which was not statistically significant. 3. After remineralization, percentage of Ca, P increased about by 4.47 and 4.35% respectively Percentage of F decreased by about 0.01%, which was not statistically significant. In conclusion, remineralized solution used in our study has the potential to induce the uptake the Ca and P into the pore sites of the demineralized enamel. But, in the oral cavity. there were rapid temperature change, organic matrix that inhibits the movement of the ions, and limitation of continuous contact with this remineralized solution. Therefore, further in vivo study is necessary.

• Restorative Dentistry and Endodontics
• /
• 제24권3호
• /
• pp.465-472
• /
• 1999

The aim of this study was to determine the shear bond properties of four dentin bonding systems to internal cervical dentin, and to investigate the effect of the pretreatment for removing smear layer and position of dentin on shear bond strength of dentin bonding agents. The materials tested in this study were consisted of four commercially available dentin bonding systems[Allbond 2(AB), Clearfil Linerbond 2(CL), Optibond FL(OP), Scotchbond Multi-purpose(SB)], a restorative light-cured composite resin[Z100]J and a chelating agent[RC-prep(RC)]. Fifty-six freshly extracted human molars were used in this study. Dentin specimens were prepared by first cutting the root of the tooth 1mm below the cementoenamel junction with a diamond bur in a high speed handpiece under air-water coolant, and then removing occlusal part at pulp horn level by means of a second parallel section, The root canal areas were exposed by means of cutting the dent in specimens perpendicular to the root axis. Dentin specimens were randomly assigned to two groups(pretreated group, not-pretreated group) based on the pretreatment method of dentin surface. In pretreated group, RC was applied to dentin surface for 1minute and then rinsed with NaOCl. In not-pretreated group, dentin surface was rinsed with saline Each groups were subdevided into four groups according to dentin bonding systems. Four dentin bonding systems and a restorative resin were applied according to the directions of manufacturer. The dentin-resin specimens were embedded in a cold cure acrylic resin, and were cut with a low speed diamond saw to the dimension of $1{\times}1mm$. The cut specimens were divided into three groups according to the position of internal cervical dentin. The shear bond properties of dentin-resin specimens were measured with Universal testing machine (Zwick, 020, Germany) with the cross head speed of 0.5mm/min. From this experiment. the following results were obtained : 1. In case of shear bond strength, there was no significant difference among dentin bonding systems in not-pretreated groups, whereas in pretreated groups, the shear bond strengths of AB and of SB were statistically significantly higher than those of CL and of OP. 2. The shear bond strengths of AB and of SB in pretreated groups were significantly higher than those in not-pretreated groups. 3. The shear bond strengths of radicular layer of OP were higher than those of occlusal layer of OP in not-pretreated groups, and of AB in pretreated groups. The shear bond strengths of radicular layer of AB and of CL in not-pretreated groups were higher than those in pretreated group.

• Restorative Dentistry and Endodontics
• /
• 제33권4호
• /
• pp.377-388
• /
• 2008

이 연구에서는 다양한 부식 환경하에서 니켈티타늄 파일에 대한 부식 경향을 전기화학적 검사와 시각적 검사를 이용해 비교 평가하였다. 각 45개의 21 mm ProTaper Universal 52와 21 mm #25/0.06의 Hero642 file을 기계적 하중 여부, 저장 용액(증류수 및 차아염소산나트륨), 저장 온도(22$^{\circ}C$ 및 55$^{\circ}C$), 파일 종류에 따라 18개의 그룹(n = 5)으로 나누었다. 40개의 발거 치아 근관을 성형한 후 18시간 동안 저장 용액에 조건에 따라 보관하였다. 부식 산물의 생성 여부나 변색 등을 관찰하고 주사전자현미경을 이용해 각 시편을 다양한 배율에서 관찰하였으며 에너지 분산형 X선 분광기로 성분 분석을 하였다 전기화학적분극시험을 통하여 새 파일과 근관 성형에 사용한 파일의 부식저항성을 검사하였다. 본 실험 조건하에서는 저장 용액의 종류와 보관 온도가 니켈 티타늄 파일의 부식에 영향을 주는 것으로 나타났다. 또한 이종 금속이 존재하는 경우 갈바닉 부식의 영향으로 인해니켈 티타늄 파일의 부식 경향이 증가할 수도 있음을 보였다.