• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8A
• /
• pp.879-888
• /
• 2004

In this paper, we propose a real time QoS(Quality of Service) guaranteed transmission mechanism for MPEG video traffic at the congested node in IP based networks. Recent spread of the Internet has increased the demands of a real time multimedia service of the quality, Because the type of Internet services can, however, offer the best effort delivery strategies, it is difficult to treat all the types of traffic with differential COS (Class of Service). Most of all, the hierarchical coding method of MPEG data utilizes the reference frame for the motion prediction. The loss of the reference frames makes QoS of the video traffic degraded because the reference frame bit error causes the consecutive packet loss. Therefore we have studied the real time QoS guaranteed mechanism for video traffic by analyzing the previous methods. Computer simulation results show that the proposed scheme has better performance than the previous one.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.10
• /
• pp.829-841
• /
• 1990

On assuming that the transmission speed of the original information is the fifth-order transmission speed of the Korea digital multiplex hierarchy (564.992Mb/s), this paper proposes a new structure of the transmission line frame at the terminal repeater system, in order to not only maintain and conserve 565Mb/s optical fiber transmission system but also make the B.S.I. of digital communication network for the optical transmission. And the structure uses the mBIZ transmission line code, which is considered the optimal transmission line code of conventional transmission line codes. System hardware of the transmission line frame structure proposed in this paper is consisted by a method of pulse stuffing after converting the speed of the original information signal sequence at the terminal repeater system for 565Mb/s optical transmission. As a result of this, we can prevent the optical transmission system from a domino phenomenon, the phenomenon of the continuous error multiplication of systems by the transmission error, and suppress timing jitter and the identical consecutive digit number. And also we can improve SNR of the optical transmission system about 2dB because of raising total BER at the optical terminal system up to 10.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.105-114
• /
• 2011

The snake algorithm is widely adopted to track objects by extracting the active contour of the object from background. However, it fails to track the target converging to the background if there exists background whose gradient is greater than that of the pixels on the contour. Also, the contour may shrink when the target moves fast and the snake algorithm misses the boundary of the object in its searching window. To alleviate these problems, we propose an improved algorithm that can track object contour more robustly. Firstly, we propose two external energy functions, the edge energy and the contrast energy. One is designed to give more weight to the gradient on the boundary and the other to reflect the contrast difference between the object and background. Secondly, by computing the motion vector of the contour from the difference of the two consecutive frames, we can move the snake pointers of the previous frame near the region where the object boundary is probable at the current frame. Computer experiments show that the proposed method is more robust to the complicated background than the previously known methods and can track the object with fast movement.

• Archives of Plastic Surgery
• /
• v.39 no.2
• /
• pp.162-165
• /
• 2012

The synchondrosis between the sixth and seventh costal cartilage is usually used for the base frame in autogenous ear reconstruction. If the synchondrosis is loose, a variety of modifications can be devised. This report introduces new methods for these problems. In cases of incomplete synchondrosis, only the surface of the base block margin was smoothly tapered without carving for the removal of the conchal deepening. The secure fixation of the two segments (helix and antihelix) to the base block using fine wire sutures gave stability to the unstable basal frame. After confirming that all the segments were assembled in one stable piece, the remaining conchal deepening of the basal framework was removed, and the outer lower portion of the basal cartilage was trimmed along its whole length. A total of 10 consecutive patients with microtia, ranging from 8 to 13 years old, were treated from 2008 to 2009. The follow-up period was 6 months to 2 years. Despite incomplete synchondrosis, the stable frameworks were constructed using the authors' method and aesthetically acceptable results were achieved. The proposed method can provide an easy way to make a stable cartilage framework regardless of the variable conditions of synchondrosis.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.10
• /
• pp.3334-3343
• /
• 1996

A quantitative flow visualization technique was developed to measure velocity and temperature fields simultaneously in a two-dimensional cross section of thermo-fluid flows. Thermochromic liquid crystal(TLC) particles are used as temperature sensor and velocity tracers. Illuminating a thermo-fluid flow with a thin sheet of white light, the reflected colors from the TLC particles in the flow were captured simultaneously by two CCD cameras; a 3-chip CCD color camera for temperature field measurement and a black and white CCD camera for velocity field measurement. Variations of temperature field were measured by using a HSI true color image processing system and TLC solution. The relationship between the hue values of TLC color image and real temperature was obtained and this calibration curve was used to measure the true temperature under the same camera and illumination condition. The velocity field was obtained by using a 2-frame PTV technique using the concept of match-probability to track true velocity vectors from two consecutive image frames. These two techniques were applied at the same time to the unsteady thermal-fluid flow in a Hele-Shaw cell to measure the temperature and velocity field simultaneously and some results are discussed.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.9
• /
• pp.57-64
• /
• 2017

CCSDS Standard is widely used in the international space telecommunication area. But standard recommendation of CCSDS is not restrictive, so, we can select an appropriate encryption protocol among the layer. For synchronization, encryption sync is attached in the beginning of the encrypted data. In the exceptional environmental condition, although the receiver can not decrypt the normal data, the sender have no conception of that situation. In this paper, we propose a two-stage SES alarmed link encryption synchronization method having optimized threshold value necessary to decide whether the receiver has a correct decryption or not. first, through the experiment of mutual relations between error rate and encryption synchronization detection error, we can predict worst communication environment for the selected encryption synchronization pattern. second, through the experiment for finding what number of consecutive frame synchronization error is an appropriate reference value and analysis of that experiment, we suggest an optimized threshold value for resynchronization request. lastly, through the output images we can predict the probability error that should be guaranteed by channel coder.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.6
• /
• pp.2748-2760
• /
• 2018

This paper proposes an audio event classification method based on convolutional neural networks (CNNs). CNN has great advantages of distinguishing complex shapes of image. Proposed system uses the features of audio sound as an input image of CNN. Mel scale filter bank features are extracted from each frame, then the features are concatenated over 40 consecutive frames and as a result, the concatenated frames are regarded as an input image. The output layer of CNN generates probabilities of audio event (e.g. dogs bark, siren, forest). The event probabilities for all images in an audio segment are accumulated, then the audio event having the highest accumulated probability is determined to be the classification result. This proposed method classified thirty audio events with the accuracy of 81.5% for the UrbanSound8K, BBC Sound FX, DCASE2016, and FREESOUND dataset.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.176-183
• /
• 2013

We propose a rolled fingerprint merging algorithm that effectively merges plain fingerprints in consecutive frame units that are fed through rolling and detects more fingerprint minutiae in order to increase the fingerprint recognition rate. The proposed rolled fingerprint merging algorithm uses a adaptive projection mask; it contains a detector that separates plain fingerprints from the background and a projection mask generator that sequentially projects the detect ed images. In addition, in the merging unit, the pyramid-shaped projection method is used to detect merged rolled fingerprints from the generated variable projective mask, starting from the main images. Simulations show that the extracted minutia e are 46.79% more than those from plain fingerprints, and the proposed algorithm exhibits excellent performance by detecting 52.0% more good fingerprint minutiae that are needed for matching.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.3
• /
• pp.8-21
• /
• 2015

Technology for electric lighting has been evolving from Incandescent Lamp(IL) through Fluorescent Lamp(FL) and currently to Solid State Lighting(SSL) such as LED for more than 130 years of time. However, it took more than 100 years until the transition from IL to FL across overall society. That is because the transition is the Socio-Technical Transition(STT) which involves various social elements. This study investigated and analyzed the theories regarding STT, and applied the Multi-Level Perspective(MLP) theory to the case of electric lighting. A qualitative contents analysis was used with secondary data as research method, and the analyzed result was visualized based on the frame of MLP theory. The STT of electric lighting from IL to FL took place as the order of Technical Niche, Socio-Technical Regime and Landscape. Specifically, in Technical Niche level: Establishing Market Niche, Price-Performance Improvement, Learning Process and Support of Powerful Group took place. In Socio-Technical Regime level: Changes in Social Network, Changes in Technology and Changes in Rules. In Landscape level: Macro-Political Development, Socio-Economic Trends and Macro-Economic Trends took place in consecutive order.

• Journal of Korea Multimedia Society
• /
• v.4 no.4
• /
• pp.349-355
• /
• 2001

In this paper, we newly propose a performance enhanced CSMA/CD MAC(Medium Access Control) protocol for the Ethernet which changes its operation mode dynamically according to the network status, not fixed it as one of p-persistent mode and non-persistent mode. Dynamic mode change occurs independently on each node, and uses the consecutive success count and the fail count of the frame transmission. The simulation result shows that the dynamic mode change maintains the enhanced network utilization and transmission delay characteristics. Also we show the implementation simplicity of our MAC protocol through its conceptual design using the Ethernet commercial chip as it stands.