• 대한한방내과학회지
• /
• 제20권1호
• /
• pp.48-56
• /
• 1999

This study has been carried out to investigate Brain in Nei-jing. The results of this study were as follows. 1. Kidney energy becomes the marrow by warm caring function of Meong-mun(命門) and the marrow becomes brain by ascending and gathering between a hole Back-hoi(百會) and a hole pung-ji(風池) 2. Brain is a sea of the marrow that five vital organs are eraporated togather. 3. In Nei-jing(內經), there is a explanation the connectin between brain and mind, thanking by drawing in a concept of head. 4. Brain regulrates physical excercise. 5. There is a direct connection between brain and biosis. 6. Brain achieves function of sense, relating with the five sensory organs. 7. Brain controls a change of emotion. 8. Brain has immunological function.

• 설비공학논문집
• /
• 제10권5호
• /
• pp.589-599
• /
• 1998

Air side heat transfer and pressure drop for fin-tube heat exchanger with wave and wave-slit fins were measured for various fin spacings and number of tube rows. Outer diameter of the tube including fin collar is 10.07mm, and experiments were done with dry surface condition. Longitudinal and transverse tube spacings of the heat exchangers are 21.65mm and 25mm respectively, and wave depth of the wave fin is 2mm. Experiments were conducted for 1, 2 and 3 rows and 3 different fin spacings, 1.3, 1.5 and 1.7mm. An attempt was made to demonstrate advantage of the enhanced fins over the plane fin by introducing the concept of fan power, Effect of the number of tube rows on heat transfer was discussed in connection with general mechanisms of heat transfer enhancement for fin-tube heat exchanger. Also the effect of hydrophilic coating was investigated. Lastly, correlations for Colburn j-factor and friction factor were developed.

• Environmental Engineering Research
• /
• 제15권1호
• /
• pp.29-33
• /
• 2010

In 2004, the Korean government launched comprehensive measures for nonpoint pollution that were intended to reduce their amount by 34.3% over of those forecast by 2020. During the first and second stages of their implementation; from 2004 to 2011, nonpoint source (NPS) measures have focused on systemic improvements and project management, as well as the introduction of optimal management techniques; accordingly, reductions have been small. However, during the third stage in 2011, serious reductions will be pursued. Accordingly, the gradual expansion of sites subject to NPS measures has focused on the establishment of a basis for reduction measures in connection with model projects during the first half of the plan, with full scale enforcement due in the second half. For Korea, rather than commencing NPS management en masse, it has been more appropriate to gradate NPS management into stages tailored to the different needs of new and existing businesses, as well as to the needs of large and small-scale businesses, in consideration of their specific circumstances. This has allowed sufficient time for such businesses to become accustomed to the concept of NPS management.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제41권3호
• /
• pp.341-360
• /
• 2002

The purpose of the study was to investigate the effectiveness of dynamic software in solving high school analytic geometry problems compared with traditional algebraic approach. Three high school students who have revealed high performance in mathematics were involved in this study. It was considered that they mastered the basic concepts of equations of plane figure and curves of secondary degree. The research questions for the study were the followings: 1) In what degree students understand relationship between geometric approach and algebraic approach in solving geometry problems? 2) What are the difficulties students encounter in the process of using the dynamic software? 3) In what degree the constructions of geometric figures help students to understand the mathematical concepts? 4) What are the effects of dynamic software in constructing analytic geometry concepts? 5) In what degree students have developed the images of algebraic concepts? According to the results of the study, it was revealed that mathematical connections between geometric approach and algebraic approach was complementary. And the students revealed more rely on the algebraic expression over geometric figures in the process of solving geometry problems. The conceptual images of algebraic expression were not developed fully, and they blamed it upon the current college entrance examination system.

• 한국안전학회지
• /
• 제33권2호
• /
• pp.61-67
• /
• 2018

This study proposes a new vibration control approach for adjacent twin structures, which is termed as viscous damper asymmetric coupling system in this paper. The proposed system takes a concept that the diagonal bracing viscous dampers are asymmetrically distributed in two buildings to break the behavior symmetry of the twin buildings and then the coupling viscous damper is additionally installed at the top floor of the two buildings to couple both buildings and interactively transfer the asymmetric behavior-caused damping forces into both buildings. These asymmetric damping distributions and interacting damping forces of the connection damper efficiently suppress the overall vibration of the damper-coupled adjacent twin buildings efficiently. Genetic algorithm (GA) based multi-objective optimization technique is adopted for optimal design of the proposed system. In the numerical example of adjacent twin 10-story building structures, the conventional control approach, that is, uniform damping distribution system (UDS) is also taken into account for comparison purpose. The optimization results verify that the proposed system either can improve the control performance over the UDS with the same damping capacity, or can save the damping capacity significantly while maintaining the similar level of control performance to the UDS.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.158-163
• /
• 1998

This paper is our first attempt to construct a information processing system such as the living creatures' brain based on artificial life technique. In this paper, we propose a method of constructing neural networks using bio-inspired emergent and evolutionary concept, Ontogeny of living things is realized by cellular automata model and Phylogeny that is living things adaptation ability themselves to given environment, are realized by evolutionary algorithms. Proposing evolving cellular automata neural systems are calledin a word ECANS. A basic component of ECANS is 'cell' which is modeled on chaotic neuron with complex characteristics, In our system, the states of cell are classified into eight by method of connection neighborhood cells. When a problem is given, ECANS adapt itself to the problem by evolutionary method. For fixed cells transition rule, the structure of neural network is adapted by change of initial cell' arrangement. This initial cell is to become a network b developmental process. The effectiveness and the capability of proposed scheme are verified by applying it to pattern classification and robot control problem.

• 전기학회논문지
• /
• 제65권9호
• /
• pp.1577-1582
• /
• 2016

Now we are facing severe environmental issues such as global warming. Due to these, the concerns about eco-friendly energy have been increased. Kyoto protocol and Copenhagen climate change conference are circumstantial evidence of it. With these trends, the interests for the Electric Vehicles(EVs) which do not emit any harmful gases have gradually been raised. Unfortunately, however, massive connection of EVs to the power system could cause negative impacts such as voltage variations, frequency variations and increase of demand power. To prevent the mentioned issues, KEPCO adopts Time-of-Use(ToU) price for EVs charging. Nevertheless, it is important to verify the propriety of the charging system. In this paper, therefore, we used pre-introduced price elasticity concept to predict possible Demand Response(DR) on charging of EVs. And analyzed possible demand power increase according to various price elasticities. Simulation results show that given ToU based charging system would not enough to control the increase of demand power by EVs on the power system. It is concluded, therefore, additional methods and/or algorithms are required.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.24-27
• /
• 2001

Nowadays, increasing demand of the customized products has led to an increased usage of rapid prototyping in the product development. However, the acquisition price of a rapid prototyping equipment is still too high that not every body can afford to buy one. To offer a wide access to the users who need physical prototypes, a connection of the rapid prototyping equipment to the Internet is a viable step. It would allow a large group of customers all over the world to use the manufacturing capability of a service provider offering this kind of manufacturing service. To realize how such an e-manufacturing concept can look like, a LOM-type 3D printer developed at KIST has been used as test site and connected to the Internet. A possible user can log on to the server of the equipment and view his STL file and start the building operation from a remote place. To see whether the operation runs properly, a CCD camera is used to transmit the actual state of operation online. The result so far proves the feasibility of rapid prototyping on the Internet as well as an order-adaptive manufacturing system via web.

• 해양환경안전학회지
• /
• 제19권1호
• /
• pp.37-44
• /
• 2013

본 연구는 다양한 기상변화에 따른 안전을 확보하기 위한 해상에서의 플로팅 플랫폼의 연결에 대하여 연구하였다. 본 연구의 목적은 다양한 해상변화가 일어나는 연안역에 설치되는 플로팅 구조물에 관한 문헌 조사를 실시한 후, 콘크리트 구조물 연결하는 모델을 제시하는 것이다. 본 연구에서는 플로팅 구조의 개념, 기존의 모델, 설계적 평가를 포함한 콘크리트 구조물 기반 플로팅 플랫폼을 기술하였고, Rigid Pontoon Connector를 국내 연안역에 적합한 모델로 제안하였다. 연구의 결과로서, 리기드 폰툰 커넥터 디자인은 (Rigid Pontoon Connector) 안정적으로 플로팅 플랫폼의 연결을 구축할 수 있는 매우 효율적이고 실용적인 솔루션으로 분석되었다.

• 대한기계학회논문집A
• /
• 제29권12권
• /
• pp.1645-1652
• /
• 2005

Pick-and-place systems using suction cups have been being widely used and continuously developed in production automation. There are, however, some drawbacks in constructing such systems. One of them is that it generates high level noise due to air compressors. And the system must have complex constitutions of mechanical component such as air compressors, air tubes, air valves, etc. Moreover, it needs continuous air supply to maintain vacuum in suction cups. If there is a failure in any suction cup, the total suction system may fail owing to air leakage. To overcome these drawbacks, we propose PMS (Permanent Magnet Suction) mechanism which has permanent magnets for vacuuming suction cups with no air compressor. The basic concept of PMS mechanism is to rotate permanent magnets with fixed angle. Simple rotation of permanent magnets changes the direction of the magnetic force applied at the suction cups. Since each suction cup has no direct connection with any of the others, the air leakage at one suction cup is not critical. The proposed suction mechanism was designed and fabricated. With some experiments, the feasibility and performance of the PMS mechanism was shown. The strong points of the PMS mechanism are in its simple structure, generating low noise, high energy efficiency, and no need of continuous energy supply.