• 제목/요약/키워드: Connection Relationship

검색결과 714건 처리시간 0.025초

Systematic Analysis of Bandgap Evolution of Conjugated Polymers

  • Hong, Sung Y.
    • Bulletin of the Korean Chemical Society
    • /
    • 제16권9호
    • /
    • pp.845-850
    • /
    • 1995
  • A systematic method is presented to analyze the bandgaps of conjugated polymers in terms of geometrical relaxations and electronic effect of moieties using the equation of Eg=ΔEδr + ΔE1-4 + ΔEel. The relationship between ΔEδr and δr is derived from trans-PA and is transferred to other conjugated polymeric systems. By applying this method to heterocyclic polymers, very useful information is obtained to understand the evolution of bandgaps of PT, PPy and PF in connection with the chemical structures and electronic effect of the heteroatoms. We believe that this method is very helpful to understand the evolution of bandgaps of various conjugated polymers in connection with the chemical structures and electronic effect of moieties. Also, the method is expected to provide valuable information to design a small bandgap polymers.

Condensation of independent variables in free vibration analysis of curved beams

  • Mochida, Yusuke;Ilanko, Sinniah
    • Advances in aircraft and spacecraft science
    • /
    • 제3권1호
    • /
    • pp.45-59
    • /
    • 2016
  • In this paper, the condensation method which is based on the Rayleigh-Ritz method, is described for the free vibration analysis of axially loaded slightly curved beams subject to partial axial restraints. If the longitudinal inertia is neglected, some of the Rayleigh-Ritz minimization equations are independent of the frequency. These equations can be used to formulate a relationship between the weighting coefficients associated with the lateral and longitudinal displacements, which leads to "connection coefficient matrix". Once this matrix is formed, it is then substituted into the remaining Rayleigh-Ritz equations to obtain an eigenvalue equation with a reduced matrix size. This method has been applied to simply supported and partially clamped beams with three different shapes of imperfection. The results indicate that for small imperfections resembling the fundamental vibration mode, the sum of the square of the fundamental natural and a non-dimensional axial load ratio normalized with respect to the fundamental critical load is approximately proportional to the square of the central displacement.

A Study on the Relationship Between Feminist Art and Fashion in Modern Chinese Art Era

  • Xing, Zhang;Kan, Hosup
    • 패션비즈니스
    • /
    • 제24권6호
    • /
    • pp.18-45
    • /
    • 2020
  • Feminist artists are special in Chinese modern art. Sticking to their own artistic ideas, they constantly emphasize women's psychological characteristics and aesthetic values in their works under the background of modern society. Since feminism was introduced into China from western arts in the 1970s, it has greatly inspired Chinese female artists. This study used comparative analysis and correlation analysis to establish the connection between the works of local Chinese female artists and modern women's wear design, this connection is the common language form of Chinese female artists and modern fashion designers when expressing female psychology and aesthetics. This is a way for Chinese female artists to seek dialogue with Western and global female art, and the development characteristics of the localization of feminism in Chinese art and design. The significance of the research is to improve the international artistic atmosphere of Chinese feminist art and instill a new understanding of Chinese feminist art in the world.

GeoGebra를 활용한 연립이차방정식 교수.학습 방안 연구 (A Study on the Teaching and Learning Method of Simultaneous Quadratic Equations Using GeoGebra)

  • 양성현
    • East Asian mathematical journal
    • /
    • 제37권2호
    • /
    • pp.265-288
    • /
    • 2021
  • In the 2015 revised mathematics curriculum, the system of equations is first introduced in 'Variables and Expressions' of [Middle School Grades 1-3]. Then, It is constructed that after learning the linear function in 'Functions', the relationship between the graphs of two linear functions and the systems of linear equations are learned so that students could improve the geometric representation of the systems of equations. However, in of Elective-Centered Curriculum Common Courses, Instruction is limited to algebraic manipulation when teaching and learning systems of quadratic equations. This paper presented the teaching and learning method that can improve students' mathematical connection through various representations by providing geometric representations in parallel using GeoGebra, a mathematics learning software, with algebraic solutions in the teaching and learning situation of simultaneous quadratic equations.

한국 학술지 기반 컴퓨터분야 연구기관 공저 네트워크 분석 (Co-author Network Analysis of Research Institutes in the Computer Field Based on the Journal Articles Published in Korea)

  • 김병규;류범종
    • 한국컴퓨터정보학회:학술대회논문집
    • /
    • 한국컴퓨터정보학회 2021년도 제64차 하계학술대회논문집 29권2호
    • /
    • pp.117-122
    • /
    • 2021
  • In order to reveal the co-research relationship with key research institutes in the computer field in Korea, which have high competitiveness in the ICT field, this paper analyzes the co-author network of research institutes based on the papers of Korean journals. For this study, 15 computer journals published in Korea were selected and collected for the past 5 years. In addition, authors, affiliated institutions, and country information were extracted from the papers, and experimental data were produced using institutional identification data and SNA analysis techniques. Through this, statistical analysis was performed on researchers, research institutes, and countries, and the centrality of research institutes was measured through co-authored network analysis and visualized as a map. The results of the research that analyzed the co-author relationship based on the papers in computer science journals published in Korea are as follows. First, the status of co-author relations among researchers was statistically analyzed in detail. The number of authors, the number of co-authors, and statistics by co-authoring countries, as well as the ratio of co-authored research by institution and the ratio of co-authored by country were revealed. The co-authoring status of papers in English journals was analyzed separately to compare and analyze characteristics. Second, the centrality of each individual was measured through the co-authored network analysis of the identified researchers, institutions and countries affiliated with the institution, and the frequency of connection between data by level was identified. In addition, the co-authorization network between research institutes was visualized and presented as a map so that the overall view of the co-authoring network was presented, and the connection frequency between the institutes was checked. It is possible to recommend a research partner based on the co-authoring behavior of Korean computer researchers and the co-authoring relationship between major research institutes. For this, additional research is needed to analyze the subject areas of each institution.

  • PDF

전문도서관에서의 PCRM 시스템 도입과 적용에 관한 연구: 통일부 사례를 중심으로 (A Study on the Introduction and Application of Policy Customer Relation Management System in Special Libraries: Based on Case Study of Ministry of Unification)

  • 송승섭
    • 정보관리학회지
    • /
    • 제25권3호
    • /
    • pp.119-141
    • /
    • 2008
  • 본 연구는 먼저 민간의 고객관계관리(CRM)시스템을 정부차원에서 적용한 정책고객관계관리(PCRM) 시스템의 개념과 현황, PCRM과 CRM의 비교, 그리고 통일부의 도입사례를 통해 PCRM의 핵심인 고객의 정의와 분류 과정에 대해 살펴본다. 다음, 통일부 소속 전문도서관인 북한자료센터의 사례를 통해 다른 정부기관 전문도서관에서의 활용 방향과 전자정부에서 시도된 다른 연계 시스템들과의 관계에 대해 논구한다. 마지막으로 이를 통해 PCRM이 전문도서관에서 발전적으로 정착하기 위해서 보안해야 할 문제에 대해서 고찰한다.

The Relationship Between Transformational Leadership, Prosocial Behavioral Intentions, and Organizational Performance

  • SALIM, Ansa;RAJPUT, Nahid Abdul Rauf
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제8권1호
    • /
    • pp.487-493
    • /
    • 2021
  • This study examines the relationship between three major elements -Transformational leadership, Prosocial Behavioral Intentions, and Organizational Performance of full-time academics from different universities and colleges in Oman. A total of 322 full-time employees from different universities and technical colleges participated in an online survey and hardcopy survey. The data was collected using the primary data collection method. Structured scales were adopted for the study to include all the variables under study (Garcia-Morales et al., 2012; Baumsteiger et al., 2019). The adopted questionnaire was slightly modified to align with the circumstances of universities as well as colleges in Oman. A hypothesis is formed to find out the significant contributions among different sample categories. The correlation method was used to find out the relationship. It was evident from the result that there exists a significant relationship between major variables under study. This study reveals an important characteristic of transformational leadership towards prosocial behavioral intentions as it has a connection with organizational performance. There is limited research available to find out the relationship between prosocial behavioral intentions, transformational leadership, and organizational performance. This research focuses on identifying the antecedents and factors influencing organizations' performance efficiently and productively.

반강접 접합부 배치에 따른 비가새 5층 철골골조구조물의 비탄성 정적해석 (Pushover Analysis of an Unbraced 5-Story Steel Framed Structure for Arrangement of Semi-Rigid Connection)

  • 강석봉;김신애
    • 한국강구조학회 논문집
    • /
    • 제22권4호
    • /
    • pp.325-334
    • /
    • 2010
  • 본 연구에서는 반강접 접합부 배치에 따른 구조물 거동특성을 파악하기 위하여 KBC2005 건축구조설계기준으로 비가새 5층 철골 구조물을 설계하여 모든 접합부를 완전 강접합부과 반강접 접합부로 이상화한 경우 그리고 반강접 접합부를 수직배치 및 수평배치한 경우에 대하여 푸쉬오버 구조해석을 실시하였다. 철골 보 및 기둥의 모멘트-곡률관계는 화이버모델을 이용하여 확인하였으며 반강접 접합부의 모멘트-회전각 관계는 3-매개변수 파워모델을 이용하여 나타내었다. KBC2005 등가정적횡하중을 받는 2차원 구조물에 대한 푸쉬오버 구조해석을 실시하여 지붕충변위, 밑면전단력, 접합부 요구연성도, 소성힌지 발생순서 그리고 초과강도계수, 연성계수, 반응수정계수와 같은 설계계수 등을 확인하였다. 반강접 접합부를 부분적으로 사용하면 모든 접합부에 반강접 접합부를 사용한 골조 보다 큰 강도 및 강성도를 확보 할 수 있었고 모든 접합부에 강접 접합부를 사용한 골조 보다 큰 연성능력을 확보할 수 있었다. 초과강도계수는 기준과 비슷하였지만 반응수정계수는 기준 보다 훨씬 큰 값을 보였다. TSD 접합부는 예제 구조물에서 경제성과 안전성을 확보할 수 있음을 확인할 수 있었다.

보-기둥 접합부를 고려한 5층 철골골조구조물의 비탄성 정적해석 (Pushover Analysis of a Five-Story Steel Framed Structure Considering Beam-to-Column Connection)

  • 강석봉;이재환
    • 한국강구조학회 논문집
    • /
    • 제22권2호
    • /
    • pp.129-137
    • /
    • 2010
  • 본 연구에서는 횡력을 받는 구조물 거동에 대한 보-기둥 접합부의 영향을 확인하기 위하여 5층 철골구조물을 KBC2005 건축구조설계기준에 맞게 구조설계 하였으며 접합부를 완전 강접합부로 이상화한 경우와 반강접 접합부로 설계하였다. 철골 보 및 기둥의 모멘트-곡률관계는 화이버모델을 이용하여 확인하였으며 반강접 접합부의 모멘트-회전각 관계는 3-매개변수 파워모델을 이용하여 나타내었다. 구조물 거동에 대한 고차모드의 영향을 확인하기 위하여 KBC2005 등가정적 횡하중과 고차모드를 고려한 횡하중을 재하하였다. 5층 철골구조물은 개별 골조와 연결골조의 2차원 구조물로 이상화하였다. 횡하중을 받는 2차원 구조물에 대한 푸쉬오버 구조해석을 실시하여 지붕충변위-밑면전단력, 초과강도계수, 연성계수, 반응수정계수와 같은 설계계수, 접합부 요구연성도 그리고 소성힌지 분포 등을 확인하였다. 예제 구조물은 기준의 반응수정계수 보다 큰 값을 보였고 고차모드의 반응수정계수에 대한 영향은 거의 없었고 KBC2005 횡하중은 안전한 편에 속했다. TSD 접합부는 예제 구조물에서 경제성과 안전성을 확보할 수 있음을 확인할 수 있었다.

AR 디스플레이 연결을 통한 감각시각화에 대한 표현 검토 (Study on the Expression of Sensory Visualization through AR Display Connection - Focusing on Eye Tracking)

  • 마소위
    • 문화기술의 융합
    • /
    • 제10권2호
    • /
    • pp.357-363
    • /
    • 2024
  • AR 디스플레이 가상기술이 대중 학습 생활에 광범위하게 들어오면서 현실과 가상이 연결을 하는 디자인 전달 방식도 변화하고 있다. 본 논문은 평면의 시각적방향 감각 정보 시각화 경험을 통하여 3D 연결 감각 정보 시각화 경험과 가상 현실적 증강 사이의 표현을 연구하는 데 목적이 있다. AR 디스플레이 대한 고찰과 평면 시각화 사례의 현재 적용과 비교하여 기본 설정하는 방법을 조사하여 분석된다. AR 디스플레이 연결 디자인에서 제스처 연결, 안구추적, 음성 연결 및 센서의 4가지 범주에서 안구 추적 기술을 중심으로 감각 시각화와의 관계를 통해 사용자가 더 나은 경험을 할 수 있도록 하는 것이 이 논문의 범위이다. AR 디스플레이 상호작용에 대한 고찰과 평면 시각화 사례의 현재 적용 및 비교 분석 과정을 통해 AR 디스플레이 상호작용을 통한 안구 추적 기술을 중심으로 감각 시각화의 요소 시각 도형의 기하학적 일관성, 빛과 색상의 일관성, 다감각 상호작용 방식의 조합, 합리적인 내용의 표시, 스마트 푸시는 가상현실에서의 감각 시각화를 보다 사실적이고 편리하게 표현하여 수용자에게 간단하고 편리한 감각 시각화 경험을 제공하였다.