• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.268-270
• /
• 2005

A tendency to erect more wind turbines can be observed in order to reduce the environmental consequences of electric power generation. As a result of this, in the near future, wind turbines may start to influence the behavior of electric power systems by interacting with conventional generation and loads. Therefore, wind turbine models that can be integrated into power system simulation software are needed. In this paper, a model that can be used to represent all types of variable speed wind turbines in power system simulations is presented. Wind turbine characteristic equation of a wind turbine is implemented in the RTDS, and the real data of weather conditions are interfaced to the RTDS for the purpose of real time simulation of grid-connection wind power system. The outcomes of the simulation demonstrate the effectiveness of the proposed simulation scheme in this paper. The results show that the cost effective verifying for the efficiency and stability of WPGS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.325-333
• /
• 1998

In this paper, conventional STM(Synchronous Transfer Mode) supports another traffics by using idle channels. Proposed mobile terminals are distributed independently at the BSA(Basic Service Area). So, MAC(Medium Access Control) specified on the wireless ATM networks, which is managing statistics multiplewing functions, idle channel's ultilization is maximized and multimedia service characteristic for conventional wired networks based fixed assignment scheme(connection-oriented) and random assignment scheme(connection-oriented) improving on dynamic reservation based MAC protocol.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.3
• /
• pp.241-245
• /
• 2019

This work presents the response characteristics of a ZnO varistor to conductive EMP. An E1 pulse, standardized to MIL-STD-188-125-1, was applied to the varistors wherein the residual current and response times were measured with the applied E1 pulse current. Additionally, the response time was measured according to the length of the connection path. Consequently, the amplitude of the residual voltage through the ZnO varistors was increased with increasing amplitude of the applied E1 pulse current. As the length of the connection path increased, the operating response time and residual peak voltage also increased. These results indicate that the response characteristics of ZnO varistors can be applied to basic data to support the use of varistors as a protective measure against conductive EMP.

• Proceedings of the IEEK Conference
• /
• 2001.06c
• /
• pp.93-96
• /
• 2001

In this paper, we propose a delay-constrained retransmission method to control packet error or loss in common internet. The Delay Regulator(or Jitter Buffer) which is used to control errors caused by unreliable UDP connection, stores received data packets fDr a small amount of time to prevent network jitter from affecting display quality, which causes constant delay. In this paper, we propose a retransmission method to increase efficiency of ARQ(Automatic Repeat reQuest) by using characteristic of delay regulator.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.12
• /
• pp.1507-1513
• /
• 1999

This paper describes simulation and experimental results to analyze the dynamic characteristics of STATCOM, which is connected to the ac system for compensation the power factor and improving the voltage stability. The simulation and experimental results confirm that the scaled model for STATCOM can properly compesate the power factor of the load and regulate the bus voltage at the common connection point.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.192-194
• /
• 2003

In this paper, we present a 2-Dimensional simulation model of the discharge in an ac plasma display panel cell. Therefore, we study a ramp reset waveform in an ac plasma display panel discharge cell using 2-Dimensional simulation. Finally We research a connection between priming particles' density and stability.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.35-36
• /
• 2009

This paper was to present the design and construction characteristic of precast segmental PSC bridge piers with shear resistance connection structure for a field application.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.51-54
• /
• 1990

A parametrization for a linear system is presented to design a direct model reference adaptive pole placement controler. This parametrized model is one of the structured nonminimal models. The exponentially weighted least-squres algorithm is employed to estimate the control parameters. The direct adaptive controller has the exponential weighting properties by the proposed method of selecting the characteristic polynomials of the sensitivity function filters in connection with the reference models.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.3 s.25
• /
• pp.97-107
• /
• 2007

The purpose of this study is to grasp the characteristic of indoor thermal environment from large enclosures in connection with heating condition and outdoor environment. This study has measured indoor thermal environment in accordance with heat loads from occupant for large enclosures in winter. We examined indoor thermal environment of the large enclosures in this study which include temperature distribution vertical, horizontal, seat and surface and thermal comfort environment.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.382-385
• /
• 2007

The optimal design and characteristic analysis of Double Fed Induction Generator(DFIG) was performed. The purpose of the paper is to verify the accuracy of design and the reliability of DFIG by experiment. A grid connection experiment is performed to confirm generating performance in wide operating range. In this experiment, 2.7MW M/G set is used. The finite element method is applied to calculate parameters and characteristic analysis of DFIG. And in order to reduce design time and efforts, Design of Experiment(DOE) is used. The experimental results are compared with the optimum design results.