• 융합정보논문지
• /
• 제7권6호
• /
• pp.173-179
• /
• 2017

최근 IoT의 발전으로 다양한 통신방식을 지원하는 장치들을 서로 연결하여 데이터를 송 수신하는 사례가 증가하고 있다. 본 연구에서는 직렬통신, TCP, UDP, ZigBee, Bluetooth 등 여러 가지 통신 방식을 지원하는 멀티터미널 에뮬레이터를 제안한다. 이 시스템은 각 통신 방식 별로 여러 개의 채널 연결을 지원하고, 데이터 전송을 예약할 수 있고, 통신 데이터 통계를 수집하여 그래프로 표현하고, 로그 기록을 저장하는 기능을 제공한다. 이 시스템을 사용함으로써 다중 장치간 통신 연결을 테스트할 수 있게 되어, IoT 시스템 개발에 편의성을 제공할 것으로 기대한다.

• Journal of Communications and Networks
• /
• 제18권2호
• /
• pp.261-269
• /
• 2016

In this paper, the impact of energy constraints on a two-hop network with a source, a relay and a destination under random medium access is studied. A collision channel with erasures is considered, and the source and the relay nodes have energy harvesting capabilities and an unlimited battery to store the harvested energy. Additionally, the source and the relay node have external traffic arrivals and the relay forwards a fraction of the source node's traffic to the destination; the cooperation is performed at the network level. An inner and an outer bound of the stability region for a given transmission probability vector are obtained. Then, the closure of the inner and the outer bound is obtained separately and they turn out to be identical. This work is not only a step in connecting information theory and networking, by studying the maximum stable throughput region metric but also it taps the relatively unexplored and important domain of energy harvesting and assesses the effect of that on this important measure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.57-60
• /
• 2001

CATV is the abbreviation for Cable Television. General CATV is a way of multi-channel sending images, voices and music including stillness image as well as characters to public receivers through electrical cable communication system. In the beginning, master antennas were people can not receive TV signal well. TV programs were received from master antennas to TVs in each house. Ground connection began by experimenting lightning with the use of a kite and it means electric appliances, communication equipments, measuring instruments and so on connecting the Earth in order to flow away overcharged electricity. There are two kinds of earth connection: Power Ground and Signal Ground. Power Ground is for preventing an electric shock and in general there's no current in the connector. However in an accident, there's a quick flow of electricity out to the Earth. Signal Ground is not only for the safety of appliances but also for the safety of equipment operation. This paper is about connection for noise and interference reduce in order to prevent wrong operation and distortion of signal in the electrical appliances which can take place in CATV.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.179-185
• /
• 2017

Communication technologies hold a significant place in the swarm flight of drones for surveillance, inspection of disasters and calamities, entertainment performances, and drone collaborations. A GCS(ground control station) for the control of drone swarms needs its devoted communication method to control a large number of drones at the same time. General drone controllers control drones by connecting transmitters and drones in 1:1. When such an old communication method is employed to control many drones simultaneously, problems can emerge with the control of many transmitter modules connected to a GCS and frequency interference among them. This study implemented a transmitter controller to control many drones simultaneously with a communication chip of 2.4GHz ISM band and a Cortex M4-based board. It also designed a GCS to control many transmitter controllers via a network. The hierarchical method made it possible to control many more drones. In addition, the problem with frequency interference was resolved by implementing a time- and frequency-sharing method, controlling many drones simultaneously, and adding the frequency hopping feature. If PPM and S.BUS protocol features are added to it, it will be compatible with more diverse transmitters and drones.

• 한국전기전자재료학회논문지
• /
• 제31권1호
• /
• pp.50-54
• /
• 2018

In this study, a femtosecond laser pre-annealing technology based on indium zinc oxide (IZO) thin-film transistors (TFTs) was investigated. We demonstrated a stable pre-annealing process to analyze the change in the surface structures of thin-films, and we improved the electrical performance. Furthermore, static and dynamic electrical characteristics of IZO TFTs with n-channel inverters were observed. To investigate the static and dynamic responses of our solution-processed IZO TFTs, simple resistor-load-type inverters were fabricated by connecting a $1-M{\Omega}$ resistor. The femtosecond laser pre-annealing process based on IZO TFTs showed good performance: a field-effect mobility of $3.75cm_2/Vs$, an $I_{on}/I_{off}$ ratio of $1.8{\times}10^5$, a threshold voltage of 1.13 V, and a subthreshold swing of 1.21 V/dec. Our IZO-TFT-based N-MOS inverter performed well at operating voltage, and therefore, is a good candidate for advanced logic circuits and display backplane.

• 한국항행학회논문지
• /
• 제6권4호
• /
• pp.306-311
• /
• 2002

본 논문에서는 adaptive array 안테나와 동일 채널 간섭 제거기를 직렬로 연결한 다중 접속 제거 기법을 채용한 MC CDMA 시스템을 제안하였다. 그리고 제안된 시스템의 성능 열화의 주요 원인인 MUI가 존재하는 AWGN 채널 환경에서 BER (Bit Error Rate) 성능을 분석하였고, 성능 개선 정도를 평가하였다. 성능 해석 결과, adaptive array 안테나보다 동일 채널 간섭 제거기가 성능 개선에 지배적인 영향을 끼침을 알 수 있었고, 다중 접속 제거 기법을 채용하면 사용자 수가 많을수록 성능 개선 효과가 뚜렷이 나타남을 알 수 있었다. 그리고 다중 접속 제거 기법을 채용한 경우, $E_b/N_o$가 10 dB를 넘게 되면 BER=$10^{-5}$을 만족할 수 있음을 알 수 있었다.

• Structural Engineering and Mechanics
• /
• 제74권3호
• /
• pp.381-394
• /
• 2020

The structural performance of cold-formed steel (CFS) built-up battened columns were numerically investigated in this paper. The built-up column sections were formed by connecting two-lipped channels back-to-back, with a regular spacing of battens plates, and have been investigated in the current study. Finite element models were validated with the test results reported by the authors in the companion paper. Using the validated models, the parametric study was extended, covering a wider range of overall slenderness to assess the accuracy of the current design rules in predicting the design strengths of the CFS built-up battened columns. The parameters viz., overall slenderness, different geometries, plate slenderness (b/t ratio) and yield stress were considered for this study. In total, a total of 228 finite element models were analyzed and the results obtained were compared with current design strength predicted by Effective Width Method of AISI Specifications (AISI S100:2016) and European specifications (EN1993-1-3:2006). The parametric study results indicated that the current design rules are limited in predicting the accuracy of the design strengths of CFS built-up battened columns. Therefore, a design equation was proposed for the AISI and EC3 specifications to predict the reliable design strength of the CFS Built-up battened columns and was also verified by the reliability analysis.

• ETRI Journal
• /
• 제43권2호
• /
• pp.232-245
• /
• 2021

As wireless communication continues to develop in limited frequency resource environments, it is becoming important to identify the state of spectrum utilization and predict the amount needed in future. It is essential to collect reliable information for data analysis. This paper introduces a platform that enables the gathering of the scheduling information of a long-term evolution (LTE) cellular system without connecting to the network. A typical LTE terminal can confirm its assigned resource information using the configuration parameters delivered from a network. However, our platform receives and captures only the LTE signal over the air and then enables the estimation of the data relevant to scheduling for all terminals within an LTE cell. After extracting the control channel signal without loss from all LTE subframes, it detects valid downlink control information using the proposed algorithm, which is based on the error vector magnitude of depatterned symbols. We verify the reliability of the developed platform by comparing it with real data from mobile phones and service operators. The average difference in resource block utilization is only 0.28%.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.705-707
• /
• 2014

동기식 Ethernet은 차세대 차량 네트워크의 핵심 기술이며 현재 연구의 초기 단계라 할 수 있다. 이러한 네트워크는 서로 간에 네트워크 장비가 호환되지 않기 때문에 서로 다른 네트워크 간의 성능을 보장 받기 위해서는 게이트웨이의 개발이 필수적이다. 하지만 MOST150 이더넷 네트워크와 동기식 이더넷 네트워크에서 데이터 전송을 위해 게이트웨이를 구성할 경우, 데이터량이 증가하게 되면 지원하는 대역폭이 달라 데이터의 손실과 지연이 발생할 수 있다. 이러한 대역폭과 전송지연을 모두 같이 최적화시킬 수 있는 스케줄링 알고리즘이 필요하지만, 이에 관한 연구 결과가 많지 않다. 본 연구에서는 CAN, MOST, Ethernet 네트워크를 유기적으로 연결하여 하나의 네트워크를 형성할 수 있는 Ethernet을 적용한 차량 통합 게이트웨이 시스템를 설계하고자 한다. 또한 Ethernet 차량 통합 게이트웨이 시스템에서 처리하는 다양한 종류의 데이터에 대한 서비스 품질 및 자원 이용률, 지연을 보장하기 위한 스케줄링 알고리즘의 성능 분석을 위한 설계 방안을 제시하고자 한다.

• 한국의학물리학회지:의학물리
• /
• 제31권4호
• /
• pp.172-178
• /
• 2020

Purpose: Radiation oncology information systems (ROIS) have evolved toward connecting and integrating information between radiation treatment procedures. ROIS can play an important role in utilizing modern radiotherapy techniques that have high complexity and require a large amount of information. Methods: Using Access^TM software, we have developed a relational database that is highly optimized for a radiotherapeutic workflow. Results: The prescription table was chosen as the core table to which the other tables were connected, and three types of forms-charts, worklists, and calendars- were suggested. A fast and reliable channel for delivering orders and remarks according to changes in the situation was also designed. Conclusions: We expect our ROIS design to inspire those who need to develop and manage an individual ROIS suitable for their radiation oncology departments at a low cost.