• Journal of Korean Society of Rural Planning
• /
• v.11 no.1 s.26
• /
• pp.1-8
• /
• 2005

The purpose of this study is to develop a simulation model of rural road path for infrastructure of green-tourism and public service in rural areas. This study makes an objective function for moving cost minimization considering car travel time according to road characteristics, which can route the optimal shortest road paths between the center places and all rear villages, based on GIS coverages of road-village network for connecting between center places and rural villages as input data of the model. In order to verify the model algorithm, a homogeneous hexagonal network, assuming distribution of villages with same population density and equal distance between neighborhood villages on a level plane area, was tested to simulate the optimal paths between the selected center nodes and the other rear nodes, so that the test showed reasonable shortest paths and road intensity defined in this study. The model was also applied to the actual rural area, Ucheon-myun, which is located on Hoengsung-gun, Kangwon-do, with 72 rural villages, a center village (Uhang, 1st center place) in the area, a county conte. (Hoengsung-eup, 2nd center place), and a city (Wonju, 3rd center place), as upper settlement system. The three kinds of conte. place, Uhang, Hoengsung-eup, and Wonju, were considered as center places of three scenarios to simulate the optimal shortest paths between the centers and rural villages, respectively. The simulation results on the road-village network with road information about pavement and width of road show that several spans having high intensity of road are more important that the others, while some road spans have low intensity of road.

• Journal of Distribution Science
• /
• v.9 no.3
• /
• pp.65-71
• /
• 2011

There is a growing concerns for startups and management issues in the small business sector. In the Korean unique condition, female-owned small business seemed to play a crucial role in stimulating domestic demands and replacements for workforce reductions in the time of reduced birth rates and export-driven economy. Despite importance of female-owned small businesses, domestic statistics about female small businesses are not well recognized and defined. To design the current entrepreneurship training programs for female entrepreneurs more female-friendly, we need to improve overall environments surrounding training systems. We can classify the environmental improvement for women-friendly entrepreneurship training into three types as follows: First, it is needed to conduct regular surveys on difficulties female entrepreneurs may have. To develop a program for women-friendly entrepreneurship training, extensive and thorough survey is required for entrepreneurship training goals. To design women-friendly entrepreneurship training for women entrepreneurs henceforth, preliminary surveys should be carried out to detect problems within the course of the program and women's expectation regarding entrepreneurship training. Second environmental improvement is to overcome the lack of information on entrepreneurship training for women. Difficulties that women entrepreneurs experience are different from their counterparts, male. Last is about overcoming the lack of follow-up management after opening a business. To surmount the issue, we need to organize a management improvement consulting systems focused on female entrepreneurs. Establishing networks connecting female businesses should be the most urgent measure. With this regard, if follow-up services for female entrepreneurs are provided for at least three years from the time a business is opened, it may produce even more desirable results.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.4
• /
• pp.509-515
• /
• 2010

In this paper, the mechanism that can walk efficiently in wet land or sand area is proposed. A vision camera is attached to the mechanism, which makes a kind of biologically inspired robot for coast guard. This visionary information enables the biologically inspired robot to react in peripheral environment by a soft-computing algorithm. In addition, the biologically inspired robot can achieve the mission appointed by a programmer connecting with outside, based on RF and Blue-tooth communication module. Therefore, the purpose of this research is the implementation of the biologically inspired robot that can operate most adaptively in sand and wet surface based on Theo Jansen mechanism.

• Journal of Korean language education
• /
• v.29 no.3
• /
• pp.325-344
• /
• 2018

The purpose of this study is to summarize PWIM (Picture Words Inductive Model) which is one of learner-centered vocabulary teaching-learning models, and suggest ways to implement them in Korean language education. The pictures that are used in the Korean language education field help visualize the specific shape, color, and texture of the vocabulary that is the learning target; thus, helping beginner learners to recognize the meaning of the sound. Visual material stimulates the intrinsic schema of the learner and not only becomes a 'bridge' connecting the mother tongue and the Korean language, but also reduces difficulty in learning a foreign language because of the ambiguity between meaning and sound in Korean and all languages. PWIM shows commonality with existing learning methods in that it uses visual materials. However, in the past, the teacher-centered learning method has only imitated the teacher because the teacher showed a piece-wise, out-of-life photograph and taught the word. PWIM is a learner-centered learning method that stimulates learners to find vocabulary on their own by presenting visual information reflecting the context. In this paper, PWIM is more suitable for beginner learners who are learning specific concrete vocabulary such as personal identity (mainly objects), residence and environment, daily life, shopping, health, climate, and traffic. The purpose of this study was to develop a method of using PWIM suitable for Korean language learners and teaching procedures. The researchers rearranged the previous research into three steps: brainstorming and word organization, generalization of semantic and morphological rules of extracted words, and application of words. In the case of PWIM, you can go through all three steps at once. Otherwise, it is possible to divide the three steps of PWIM and teach at different times. It is expected that teachers and learners using the PWIM teaching-learning method, which uses realistic visual materials, will enable making an effective class together.

• Convergence Security Journal
• /
• v.18 no.5_2
• /
• pp.53-60
• /
• 2018

As science and technology develops, it is expected that more precise and various weapons will be used in a much more complicate future battlefield environment. C4I is a system that provides the proper and necessary information to commanders and their staffs to recognize the battlefield situation by connecting and visualizing the complex battlefield environment and various weapon systems together. Commanders and staffs perform battle command training based on a computer or paper map to better utilize the C4I system and Command Post eXercise(CPX) is a process of the training. This is the way for them to improve command control and decision making skills. Analyzing of line of sight(LOS), identifying communication fringe area, deploying troop strength, and determining unit maneuver are highly restricted under the 2D based CPX. In recent years, however, three-dimensional (3D) CPX simulators have been developed to overcome these drawbacks. In response to this trend, this paper proposes a multi-user based CPX simulator using augmented reality (AR) glass, which can be used as a practical war game simulator.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1514-1524
• /
• 2019

Hydrogen-steam gas mixture may be injected into containment with flow regime varying both spatially and transiently due to wall effect and pressure difference between primary loop and containment in severe accidents induced by loss of coolant accident. Preliminary CFD analysis is conducted to gain information about the helium flow regime transition process from jet to buoyancy plume for forthcoming experimental study. Physical models of impinging jet and wall condensation are validated using separated effect experimental data, firstly. Then helium transportation is analyzed with the effect of jet momentum, buoyancy and wall cooling discussed. Result shows that helium distribution is totally dominated by impinging jet in the beginning, high concentration appears near gas source and wall where jet momentum is strong. With the jet weakening, stable light gas layer without recirculating eddy is established by buoyancy. Transient reversed helium distribution appears due to natural convection resulted from wall cooling, which delays the stratification. It is necessary to concern about hydrogen accumulation in lower space under the containment external cooling strategy. From the perspective of experiment design, measurement point should be set at the height of connecting pipe and near the wall for stratification stability criterion and impinging jet modelling validation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.2
• /
• pp.138-144
• /
• 2019

The purpose of this paper is to explore the fishing grounds of trawl fishery, which are operating in the waters around Jeju Island, and to investigate the monthly shifting changes of the explored fishing grounds. Information on AIS of fishing vessels operating near Jeju Island was collected and analyzed from October 16, 2016 to October 16, 2017. Thus, the location of fishing vessels with the same operational characteristics as those in this industry was extracted and displayed on Google Maps' location drawings to analyze the dense distribution of fishing vessels according to the frequency of their appearance. In the distribution of fishing vessels that appeared in October, a wide range of fishing grounds connecting the upper and lower waters of the 221 and 222 sea of fishing area was found to have gradually expanded and increased density, showing the widest range and highest density in December, and then gradually decreasing from January 2017 to near extinction in May. The distribution of fishing vessels that appeared in the left and lower waters of the 243 sea estuary increased not only in November and December, but also in the appearing sea areas gradually moved to the 242 sea and the range of their appearance was extended to the 241 sea. In other words, the highly dense fishing area in December indirectly shows that it is winter fishing grounds for these industries. The distribution of these dense fishing vessels gradually moved north and west with each passing day, reducing their density and reaching a near extinction in August. However, in September, the density was gradually restored again. Fishing vessels that appeared in high density in the northern waters of the 224 sea east of the Yeoseo island in December were thought to be fishing vessels, whose density decreased over time, almost disappeared in May, and reappeared in July and August, showing a certain degree of density, and then decreased again.

• Journal of Korean Society of Rural Planning
• /
• v.25 no.2
• /
• pp.15-21
• /
• 2019

The agricultural environment is changing and becoming more advanced due to the influence of the 4th Industrial Revolution. From the basic plan of Rural Informatics to the current level of 2nd generation smart farms aimed at improving productivity using Big data, cloud network and more IoT technology. We are continuing to provide support and research and development. However, many problems remain to be solved in order to supply and settle smart farms in Korea. The purpose of this study is to provide a method of collecting and sharing data on farming environment and to help improve the income and productivity of farmers based on collected data. In the case of hog farm, the multiple sensors for environmental data like temperature, humidity and gases and the network environment for connecting the internet were established. The environment sensor was made using the ESP8266 Node MCU board as micro-controller, DHT22 sensor for temperature and humidity, and MQ series sensors for various gases in the hog pens. The network sensor was applied experimentally for one month and the environmental data of the hog farm was stored on a web database. This study is expected to raise the importance of collecting and managing the agricultural and environmental data, for the next generation farmers to understand the smart farm more easily and to try it by themselves.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.3
• /
• pp.65-72
• /
• 2019

HPC(High Performance Computing) is the computing system that connects a number of computing nodes with high performance interconnect network. In the HPC, interconnect network technology is one of the key player to make high performance systems, and mainly, Infiniband or Ethernet are used for interconnect network technology. Nowadays, PCIe interface is main interface within computer system in that host CPU connects high performance peripheral devices through PCIe bridge interface. For connecting between two computing nodes, PCIe Non-Transparent Bridge(NTB) standard can be used, however it basically connects only two hosts with its original standards. To give cost-effective interconnect network interface with PCIe technology, we develop a prototype of interconnect network system with PCIe NTB. In the prototyped system, computing nodes are connected to each other via PCIe NTB interface constructing switchless interconnect network such as ring network. Also, we have implemented prototyped data sharing mechanism on the prototyped interconnect network system. The designed PCIe NTB-based interconnect network system is cost-effective as well as it provides competitive data transferring bandwidth within the interconnect network.

• Journal of Industrial Convergence
• /
• v.19 no.5
• /
• pp.1-11
• /
• 2021

Prior research regarding the macro patterns of industry convergence has focused on the inter-industry patent network and cross-industry movements of products or services. This article provides a novel approach, according to which human resources embodying explicit and implicit knowledge and technologies are important media driving industry convergence. Drawing on GOMS data (2015-2019) and using information of university graduates' academic majors and their occupations, this article proposes an analytic strategy by which to understand the macro patterns and structural features of industry convergence. Specifically, we build unbalanced bipartite networks of major-industry (occupation) relations, and construct the measures of the industry's niche width and the measure of the average degree of convergence of majors that each industry is linked to. By crossing the two measures, we identify four groups of industries(occupations); specialist, generalist, partial convergence, and full convergence. The convergence group is composed of industries (occupations) that acquire human resources from a number of academic majors each of which plays a role of glue connecting several local industries.