• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2886-2896
• /
• 1996

The Type of Service based multicast routing algorithm is necessary to support efficiently herogeneous applications in ATM network. In this paper I propose the Constrained Multicast Tree with Virtual Destination(DMTVD) heuristic algorithm as least cost multicast routing algorithm. The service is categorized into two types, as delay sensitive and non in CMTVD algorithm. For the delay sensitive service type, the cost optimized route is the Minimum Cost Stenier Tree connecting all the destination node group, virtual destination node group and source node with least costs, subject to the delay along the path being less than the maximum allowable end to end delay. The other side for the non-delay sensitive service, the cost optimized route is the MCST connecting all the multicast groups with least costs, subject to the traffic load is balanced in the network. The CMTVD algorithm is based on the Constrained Multicasting Tree algorithm but regards the nodes branching multiple destination nodes as virtural destination node. The experimental results show that the total route costs is enhanced 10%-15% than the CTM algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.994-1003
• /
• 2009

For Automatic Meter Reading System, good topology of check machines, concentrators, and repeaters in client field is important. Steiner Minimum Tree is a minimum cost tree connecting all given nodes with introducing Steiner points. In this paper, an efficient mechanism allocating and connecting check machines, concentrators and repeaters which are essential elements in automatic meter reading system is proposed, which conducts repeated applications of building approximate Minimum Steiner Trees. In the mechanism, input nodes and Steiner points might correspond to check machine, concentrators or repeaters and edges might do to the connections between them. Therefore, through suitable conversions and processes of them, an efficient network for automatic meter reading system with both wired and wireless communication techniques could be constructed. In our experiment, for 1000 input nodes and 200 max connections per node, the proposed mechanism shortened the length of produced network by 19.1% comparing with the length of Minimum Spanning Tree built by Prim's algorithm.

• Journal of Digital Contents Society
• /
• v.8 no.3
• /
• pp.403-410
• /
• 2007

The P2P(Peer to Peer) business, which has brought the great wave all over the world, was made possible as a user's environment is getting improved through the introduction of high-tech PC, and the access service of high-speed internet. P2P is the form that anyone using computer could be both a provider and a user by searching or connecting to the personal computer each other out of the concept of server and client. In other words, it is the system made by the technique which could share the data connecting between the PC of the person with the information and the person searching the information. Recently a various system of P2P is under the development which could be applied to the electronic commerce among the companies which is not only the file share among the individuals. In this paper, we propose the more effective electronic business system making use of P2P.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.254-259
• /
• 2008

Mesh WLANs, which consist of wireless mesh routers connecting each other in a mesh topology and self-operate after their autoconfiguration, have several advantages in convenience, swiftness and flexibility of deployment and operation over existing WLANs the expansions of which are done by connecting the APs with wires. However, many technical issues still remain to be solved. Among them, network performance degradations due to the interference between the adjacent hops in multi-hop mesh WLANs, and the reusability of the existing wireless network protocols are critical problems to be answered. This work evaluates the VoIP support performance of IEEE 802.11a/g-based mesh WLANs with multiple wireless interfaces with simulations. The results show that there exit an unfairness in VoIP packet delay performances among mobile routers located at different hops, and that although the capacity of the admitted calls can be increased by increasing the size of voice packet payload it is far less than the expected one. This suggests that the existing 802.11 MAC protocols have their limitation when applied in mesh networks and their enhancement or even a newer one nay be required.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.395-407
• /
• 2019

The duplex system has been considered as an important slip-transfer mechanism to evaluate the evolution of orogenic belts. Duplexes are generally found in the hinterland portion of fold-thrust belts and accommodate large amounts of total shortening. Thus, understanding its geometric and kinematic evolution can give information to evaluate the evolution of the entire orogenic belt. Duplexes are recognized as closed-loop thrust traces on map view, indicating higher connectivity than imbricate fans. As originally defined, a duplex is an array of thrust horses which are surrounded by thrust faults including the floor and roof thrusts, and imbricate faults between them. Duplexes can accommodate regional layer-parallel shortening and transfer slip from a floor thrust to a roof thrust. However, an imbricate fault is not the only mean for layer-parallel shortening (LPS) and displacement transfer within duplexes. LPS cleavages and detachment folds can also play the same role. From this aspect, a duplex can be divided into three types; 1) fault duplex, 2) cleavage duplex and 3) fold duplex. Fault duplex can further be subdivided into the Boyer-type duplex, which was firstly designed duplex system in the 1980s that widely applied most of the major fold-thrust belts in the world, and connecting splay duplex, which has different time order in the emplacement of horses from those of the Boyer-type. On the contrary, the cleavage and fold duplexes are newly defined types based on some selected examples. In the Korean Peninsula, the Yeongwol area, the western part of the Taebaeksan Zone of the Okcheon Belt, gives an excellent natural laboratory to study the structural geometry and kinematics of the closed-loops by thrust fault traces in terms of a duplex system. In the previous study, the Yeongwol thrust system was interpreted by alternative duplex models; a Boyer-type hinterland-dipping duplex vs. a combination of major imbricate thrusts and their connecting splays. Although the high angled beds and thrusts as well as different stratigraphic packages within the horses of the Yeongwol duplex system may prefer the later complicate model, currently, we cannot choose one simple answer between the models because of the lack of direct field evidence and time information. Therefore, further researches on the structural field investigations and geochronological analyses in the Yeongwol and adjacent areas should be carried out to test the possibility of applying the fold and cleavage duplex models to the Yeongwol thrust system, and it will eventually provide clues to solve the enigma of formation and its evolution of the Okcheon Belt.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.5
• /
• pp.127-133
• /
• 2016

In this paper, an intelligent dimming control system is designed and implemented with the human visual response function using CDS sensor, PIR sensor and temperature sensor, etc. The proposed system is designed to detect a moving object by PIR sensor and to control the LED dimming considering the human visual response. Also, the dimming of LED light can modulate on the app, and simultaneously control dimming in real-world environments with smart phone app. A high-temperature warning or a fire hazard information is transmitted to user's smart phone according to sensor values and Data graph are provided as part of data visualization. Connecting the hardware controller, the proposed intelligent smart dimming control system is expected to contribute to the power reduction interior LED, smart grid building and saving home combining with internet of things.

• Culinary science and hospitality research
• /
• v.13 no.1 s.32
• /
• pp.192-203
• /
• 2007

The purpose of this study is to figure out the plans to improve business in Hotel French restaurants. This study conducts documentary study and empirical study. To achieve the purpose, a survey was conducted by 172 staffs of Hotel French restaurants in Seoul. The result of this research is as follows. Hotel restaurant operators recognize the importance of promotion and development of new sales goods. But they haven't done long-term marketing directions focusing on cost-saving and ephemeral sales promotion effects. Hotel restaurants should establish public information strategies uniformly and look for the plans that offer customers adequate information. Also, they should make a differentiation strategy within the same industry, can always give recency to customers, and enhance the event-connecting promotion menu and business activation.

• Journal of Internet of Things and Convergence
• /
• v.3 no.1
• /
• pp.9-11
• /
• 2017

Recently, with the widespread use of the Internet and mobile devices, the number of attacks by hackers using the network is increasing. When connecting a network, packets are exchanged and communicated, which includes various information. We analyze the information of these packets using hierarchical clustering analysis and classify normal and abnormal packets to detect attacks. With this analysis method, it will be possible to detect attacks by analyzing new packets.

• Journal of information and communication convergence engineering
• /
• v.12 no.1
• /
• pp.46-52
• /
• 2014

This article presents key research needs in three-dimensional integrated circuit (3D IC) architectural floorplanning. Architectural floorplaning is done at a very early stage of 3D IC design process, where the goal is to quickly evaluate architectural designs described in register-transfer level (RTL) in terms of power, performance, and reliability. This evaluation is then fed back to architects for further improvement and/or modifications needed to meet the target constraints. We discuss the details of the following research needs in this article: block-level modeling, through-silicon-via (TSV) insertion and management, and chip/package co-evaluation. The goal of block-level modeling is to obtain physical, power, performance, and reliability information of architectural blocks. We then assemble the blocks into multiple tiers while connecting them using TSVs that are placed in between hard IPs and inside soft IPs. Once a full-stack 3D floorplanning is obtained, we evaluate it so that the feedback is provided back to architects.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1465-1467
• /
• 2004

Compared with other transport means, safety and timeliness are the merits of railways. Unexpectedly when accident happens, much time and human strength are required to cope with the accident. And for swift recovery, systematic rehabilitation is needed. Recently using MTS(Moving picture Transmission System), we can perform accident rehabilitation and recording work efficiently. MTS is the device that transmits continuous picture information from accident field to control center. e are developing the appropriate system to railway situation to make use of the existing information communication technology, processing technology of video-tex, super high speed transmission technology through fiber-optic, copper cable and network description of information Technology, etc. If these communication-based can technologies are applied to railway system, railway managers can control the accident by inspecting the picture of accident field and can contribute to the safe train operation and the improvement of railway management. In this paper, we investigate the connecting methods when optical fiber is used for moving picture data transmission of train accidents, and its problems. And, we validate MTS's performance through about 28km section of field test.